Reliability-based comparative study for mooring lines design criteria

The characteristic environmental load effect for the design of mooring systems of floating units can be defined by means of three procedures: (a) the one associated to an extreme sea state with a given return period, (b) the worst one from a set of sea states on a contour line associated to a return period or (c) the extreme one based on response statistics for a long-term period. This work presents the result of a reliability-based partial safety factor calibration study for a LRFD mooring line design criteria considering the three approaches mentioned above. The calibration exercise is applied to three FPSOs considering North Sea environmental conditions and different water depths: 200, 800 and 3000 m. The mooring systems investigated take into account mooring lines made up of chains and polyester ropes. It is shown that, among all cases investigated, the design procedure based on the long-term response is the one that presents less scattered reliability indices around the target level.     

Response-based method for determining the extreme behaviour of floating offshore platforms

The accurate prediction of extreme excursion and mooring force of floating offshore structures due to multi-variete environmental conditions which requires the joint probability analysis of environmental conditions for the worst case situation is still impractical as the processing of large amount of met-ocean data is required. On the other hand, the simplified multiple design criteria (e.g. the N-year wave with associated winds and currents) recommended by API known as traditional method does lead neither to the N-year platform response nor to the N-year mooring force. Therefore, in order to reduce the level of conservatism as well as uncertainties involved in the traditional method the response-based method can be used as a reliable alternative approach. In this paper this method is described. In order to perform the calculations faster using large databases of sea states, Artificial Neural Networks (ANN) is designed and employed. In the paper the response-based method is applied to a 200,000 tdw FPSO and the results are discussed.     

A methodology for assessing the reliability of taut and slack mooring systems against instability

In the present study, a methodology for reliability assessment of slack and taut mooring systems against instability has been presented. For this purpose, first, stability analysis of slack and taut mooring systems has been carried out and instable regions are obtained using procedure available in the literature. Having known the instable region(s), methodology for reliability assessment has been proposed which is based on Monte Carlo Simulation technique. After using the proposed methodology, probabilities of failure and reliability indices has been obtained for the above systems. Some parametric studies, such as, effect of lower and upper limits of instability and effect of frequency range of generations are also included to obtain the results of practical interest.     

等高线图信息定量度量研究

在分析现有的地图信息定量度量方法的基础上,提出了一组测量等高线地形图的几何信息和拓扑信息的定量度量方法,并进行了实例分析.     

基于三角网渐进式简化的等高线多尺度综合

提出了一种基于三角网渐进式简化的等高线多尺度综合方法,实验结果表明,其不仅可以较好地保留地形特征,而且可以完全避免等高线相交现象的产生.     

等高线拓扑关系的构建以及应用

提出了等高线拓扑关系的描述框架 ,其规范化描述形式具有更强的适用性 ,使用三角网作为工具设计了建立拓扑关系的算法。以提出的拓扑关系描述为基础 ,具体实现了等高线高程自动赋值 ,处理过程可以同时考虑开曲线 (包括断线 )和闭曲线 ,提高了可靠性和自动化程度 ,并进一步将断线连接为完整目标 ,减少了人机交互的编辑工作     

基于地性线分级的DEM信息量计算方法研究

主要对基于DEM提取的地性线进行信息量的定量分析,探讨地性线的信息量与分辨率、地形单元的关系。这个过程中首先利用河网的自相似理论研究与当前DEM所代表的地貌详细程度相适宜的地性线提取的阈值区间,并讨论此阈值下地性线的分级,以此为基础通过以该分级为权重进行DEM地形信息量的计算。实践证明,这种顾及地性线等级的DEM信息量计算方法能较准确地反映地性线的分布规律和不同等级的要素造成的信息量度量差异。     

基于等高线隔断线确定DEM适宜分辨率的方法研究

分辨率是等高线数据插值生成格网DEM数据过程中需要考虑的一个重要参数,适宜的分辨率既能将等高线高程信息尽可能保留,又不会因插值造成数据冗余及误差。基于对格网DEM生成方式的理解,提出了等高线隔断线的相关概念,分析了基于地形图矢量化的等高线数据插值生成格网DEM数据,由不同长度等高线隔断线频率统计来确定格网适宜分辨率参考值的方法。同时,不同长度等高线隔断线的长度与其频率相乘得到标准长度,以及等高线隔断线中心点生成的密度分析图,均可在频率特征决定适宜分辨率参考值时起到一定的参考作用。通过样区实验验证,实现简便,可度量性强,与其他相关研究具有一致性,对确定适宜格网分辨率参考值具有一定的借鉴意义。     

中国“四纵四横”高铁网络可达性综合评估与对比

传统测算可达性的方法较为单一,缺乏多层面、多角度的综合研究和对比分析。基于时间、经济与重心视角利用可达性模型并结合ArcGIS 空间分析手段探究高铁通车前后沿线城市可达性的动态变化;利用综合变异系数、层级分析法和改进的哈夫模型分析高铁可达性空间演变特征及规律,构建高铁可达性评价体系并结合熵权法定量评估各高铁可达综合实力。研究表明：京广、京沪可达综合实力最强,沪昆、杭福深次之,沪汉蓉、哈大、青太再次之,郑西、兰新可达实力最弱;全国高铁可达性强弱变化呈明显地带性规律,东、中部高铁可达性强于东北,东北强于西部,纵向高铁强于横向;经济潜力的增加率明显高于加权平均旅行时间的减少率,可达性重心偏移驱使不同等时圈蔓延交叠;高铁以“核心—核心”逐步向“核心—网络”空间链接模式过渡,产生上海、北京、广州、深圳4 个高铁“国家服务中心”,天津、武汉、重庆等6 个“大区域服务中心”,形成“多中心”高铁服务格局以及日益庞大而复杂的高铁特质空间集群;高铁网络影响下的中国区域空间格局的渐变与重塑日趋复杂,“T”型轴带呈现出由空间极化向空间均衡转变,跨城流动性特征突显,加速空间对接与同城化进程。     

Comparative analysis of significant wave height between a new Southern Ocean buoy and satellite altimeter

中国于2019年第35次南极考察中,首次在南大洋布放了锚系实时综合观测浮标(西风带海洋环境监测浮标,WEMB),为深入了解此海区的海洋环境变化提供了宝贵资料.国家海洋技术中心WEMB研究团队基于AVISO公开发布的多颗卫星高度计L3产品,通过数据配对,误差统计和最小二乘线性拟合等方法,对西风带海洋环境监测浮标的有效波高数据误差进行了分析与校正.校正后的浮标有效波高统计显示西风带常年处于大浪以上海况,观测期间内57％处于巨浪海况,并且伴随有高度相关的大风天气.