Glacio-lacustrine stratigraphy,aquifer characterization and contaminant transport: a case study in South Lake Tahoe,California, USA

A hydrogeologic model that has been used by many researchers and consultants to describe an area of South Lake Tahoe, California, USA impacted by MTBE contamination describes a relatively homogeneous unconfined aquifer comprised of poorly sorted glacial outwash deposits, within which water-supply wells are able to exert significant alteration in natural groundwater flow. A re-examination of the area’s hydrogeology is presented, which supports a layered heterogeneous aquifer system constructed of alternating fine and coarser-grained glacio-lacustrine depositional units. This re-evaluation was accomplished through a review of lithologic logs across an area of approximately 1 km², combined with observations of significant hydraulic head differences and knowledge of the depositional environments controlled by Pleistocene Lake Tahoe high stands. Many of the fine-grained units observed at depths from 6 to 15 m, although relatively thin, are generally continuous and serve as significant barriers to groundwater flow. The vertical migration of contamination across these fine-grained units to deeper groundwaters was facilitated by cross-screened monitoring wells installed as part of site investigation activities. This conclusion highlights the importance of geologic characterization and proper monitoring well construction at contaminated site investigations.

---

Electronic supplementary material   The online version of this article (doi:) contains supplementary material, which is available to authorized users.

Estimates of heat flow and heat production and a thermal model of the São Francisco craton

An updated analysis of geothermal data from the highland area of eastern Brazil has been carried out and the characteristics of regional variations in geothermal gradients and heat flow examined. The database employed includes results of geothermal measurements at 45 localities. The results indicate that the Salvador craton and the adjacent metamorphic fold belts northeastern parts of the study area are characterized by geothermal gradients in the range of 6–17°C/km. The estimated heat flow values fall in the range of 28–53 mW/m², with low values in the cratonic area relative to the fold belts. On the other hand, the São Francisco craton and the intracratonic São Francisco sedimentary basin in the southwestern parts are characterized by relatively higher gradient values, in the range of 14–42°C/km, with the corresponding heat flow values falling in the range of 36–89 mW/m². Maps of regional variations indicate that high heat flow anomaly in the São Francisco craton is limited to areas of sedimentary cover, to the west of the Espinhaço mountain belt. Crustal thermal models have been developed to examine the implications of the observed intracratonic variations in heat flow. The thermal models take into consideration variation of thermal conductivity with temperature as well as change of radiogenic heat generation with depth. Vertical distributions of seismic velocities were used in obtaining estimates of radiogenic heat production in crustal layers. Crustal temperatures are calculated based on a procedure that makes simultaneous use of the Kirchoff and Generalized Integral Transforms, providing thereby analytical solutions in 2D and 3D geometry. The results point to temperature variations of up to 300°C at the Moho depth, between the northern Salvador and southern São Francisco cratons. There are indications that differences in rheological properties, related to thermal field, are responsible for the contrasting styles of deformation patterns in the adjacent metamorphic fold belts.     

Composition and pre-metamorphic geodynamic setting of the ultrahigh-pressure metabasic rocks from Dabie Shan,E-China

As part of the Yangtze plate, segments of the Dabie Shan terrane of Central China underwent ultra-high pressure metamorphism during Triassic subduction. We studied the geochemistry of the abundant eclogites to evaluate the nature of the protoliths and their geodynamic setting. Although some previous geochemical work exists, the analyses and interpretation herein are based on a new subdivision of the ultra-high pressure sequence into basement and cover units (Changpu and Ganghe Unit), revealing new and important results. In addition, eclogites of the so-called HP Unit south of the UHP units were studied. Whereas the large ion lithophile elements indicate postmagmatic, metasomatic changes of some samples, the high-field strength elements and the rare earth elements display original magmatic trends. The geochemical characteristics of the eclogites of the ultra-high pressure areas display a strong dependence on their “structural” and geographic position. The eclogites of the basement and the Changpu Unit indicate melt intrusion and extrusion in a continental rift system, i.e. during extensional tectonics. In contrast, the Ganghe Unit is characterized by a pronounced chemical homogeneity. The composition of the eclogites indicates generation from a mantle source highly influenced by slab-derived fluids. Those of the HP Unit show similar characteristics. Magmatism of the Ganghe and HP Unit probably occurred in a continental arc setting. A similar age for both units, geographically and/or tectonically separated, is possible. The geodynamic interpretation based on the geochemistry of the four units points to a Neoproterozoic scenario in which the protoliths of the HP and the cover units could have been of similar age and deposited in one evolving geological system. A rift-related larger-scale basin might have formed, e.g. a continental back-arc basin behind a magmatic arc after or simultaneous to sedimentation and magmatism in the magmatic arc. Alternatively, magmatism occurred in independent geodynamic settings, distinct in time and space. The units were juxtaposed during exhumation, after subduction to varying depths.     

Comparison of numerical models of two debris flows in the Cortina d’ Ampezzo area,Dolomites, Italy

The accurate prediction of runout distances, velocities and the knowledge of flow rheology can reduce the casualties and property damage produced by debris flows, providing a means to delineate hazard areas, to estimate hazard intensities for input into risk studies and to provide parameters for the design of protective measures. The application of most of models that describe the propagation and deposition of debris flow requires detailed topography, rheological and hydrological data that are not always available for the debris-flow hazard delineation and estimation. In the Cortina d’Ampezzo area, Eastern Dolomites, Italy, most of the slope instabilities are represented by debris flows; 325 debris-flow prone watersheds have been mapped in the geomorphological hazard map of this area. We compared the results of simulations of two well-documented debris flows in the Cortina d’Ampezzo area, carried on with two different single-phase, non-Newtonian models, the one-dimensional DAN-W and the two-dimensional FLO-2D, to test the possibility to simulate the dynamic behaviour of a debris flow with a model using a limited range of input parameters. FLO-2D model creates a more accurate representation of the hazard area in terms of flooded area, but the results in terms of runout distances and deposits thickness are similar to DAN-W results. Using DAN-W, the most appropriate rheology to describe the debris-flow behaviour is the Voellmy model. When detailed topographical, rheological and hydrological data are not available, DAN-W, which requires less detailed data, is a valuable tool to predict debris-flow hazard. Parameters obtained through back-analysis with both models can be applied to predict hazard in other areas characterized by similar geology, morphology and climate.     

双作用水泵泡沫增压装置应用及前景分析

双作用水泵泡沫增压装置是利用双缸双作用水泵的高压能力将低压空气和泡沫液二次增压至水泵的额定压力,并混合产生泡沫.采用BWZ-1200双作用水泵泡沫增压装置在北京地区深度为1 000 m以下的地热井钻探中,成功地克服了地热井钻进中井内漏失和洗井的难题;在极度缺水的宁夏南部地区水井钻探中,采用BWZ-1100双作用水泵泡沫增压装置解决了水井孔内严重漏失和施工用水的难题.该装置可代替价格昂贵的高压空压机实现气举反循环钻探,应用于深地热井、深水井和油气井钻探.     

煤炭采空区处理的新方法与实例分析

位于乌鲁木齐市南湖路以西的煤炭采空区面积达67 100.5m^2,区内构造从南到北主要由八道湾向斜和七道湾背斜组成,地层产状变化不大。该矿区开采较深,且采空区塌陷区有明显的地下水活动迹象。在对深孔大体积采空区注浆时,比较各种常见注浆治理方法,均存在不同的制约因素,故决定采用灌浆爆破压密法对采空区进行压实加固。经现场爆破试验,该区重复爆破次数在3～5次左右。灌浆爆破压密处理后,对不同土层进行取样对比分析,得到其相应密度（增加）及空隙比（减少）的变化分别为：杂填土14.1%,-7.9%;素填土5.9%,-3.3%;塌落煤层7.8%,-7.7%。根据压缩数据及现场测量,处理后的土体沉降2～4m,部分空体地段的沉降量达10～20m,治理效果明显。     

(ϖμ/ϖT) P of the lower mantle

We estimate (/T) _P of the lower mantle at seismic frequencies using two distinct approaches by combining ambient laboratory measurements on lower mantle minerals with seismic data. In the first approach, an upper bound is estimated for |(/T) _P | by comparing the shear modulus () profile of PREM with laboratory room-temperature data of extrapolated to high pressures. The second approach employs a seismic tomography constraint ( lnV _S / lnV _P ) _P =1.8–2, which directly relates (/T) _P with (K _S /T) _P . An average (K _S /T) _P can be obtained by comparing the well-established room-temperature compression data for lower mantle minerals with theK _S profile of PREM along several possible adiabats. Both (K _S /T) and (/T) depend on silicon content [or (Mg+Fe)/Sil of the model. For various compositions, the two approaches predict rather distinct (/T) _P vs. (K _S /T) _P curves, which intersect at a composition similar to pyrolite with (/T) _P =–0.02 to –0.035 and (K _S /T) _P =–0.015 to –0.020 GPa/K. The pure perovskite model, on the other hand, yields grossly inconsistent results using the two approaches. We conclude that both vertical and lateral variations in seismic velocities are consistent with variation due to pressure, temperature, and phase transformations of a uniform composition. Additional physical properties of a pyrolite lower mantle are further predicted. Lateral temperature variations are predicted to be about 100–250 K, and the ratio of ( lnp/ lnV _S ) _P around 0.13 and 0.26. All of these parameters increase slightly with depth if the ratio of ( lnV _S / lnV _P ) _P remains constant throughout the lower mantle. These predicted values are in excellent agreement with geodynamic analyses, in which the ratios ( ln / lnV _S ) _P and ( / lnV _S ) _P are free parameters arbitrarily adjusted to fit the tomography and geoid data.     

浅谈（TCP）射孔技术在松辽地区应用与发展

油管传佃式射孔是近几年来射孔新技术,应用于石油、天燃气勘探、开发井中。的使用,大大提高了油气井的射孔效率,增加油气产量,降低了作业成本,从而能获得较好的经济效益,解决了正压射孔存在的不足,是一项新的负压射孔方式。通过几年来在松辽地区的应用,效果很佳。大部分的高产油气流都是采用这种射孔方法进行的。