Biological marker compounds as indicators of the depositions! history of the Maoming oil shale

The Eocene Maoming oil shale from Guangdong Province occurs as a laterally uniform stratigraphic section, typically 20–25 m thick, from which the aliphatic hydrocarbon constituents of six representative samples were investigated using GC and C-GC-MS. The sediments evaluated included the basal lignite, a vitrinite lens from the overlying claystone, and four intervals from the massive oil shale bed. As expected, the lignite and vitrinite differ markedly from the oil shales. The lignite is dominated by bacterial hopanoids and components of higher plant origin, including C₂₉ steroids and triterpenoids such as oleanenes. Visually, the oil shale samples show corroded and degraded phytoclasts, spores, wispy particles of fluorescent organic material attributable to dinoflagellates and, especially in the uppermost sample, colonial algal bodies. The distributions of biological markers in the oil shales show many features in common, notably a dominance of dinoflagellate-derived 4-methylsteroids, and a significant proportion of higher-plant derived n-alkanes with marked odd-over-even carbon number predominance. Overall, they exhibit several features that resemble characteristics of the Messel shale. The hydrocarbons of the lowest shale horizon suggest that there may have been a gradual transition between deposition of the original peat and the subsequent oil shales. The aliphatic hydrocarbons of the uppermost shale are dominated by a number of C₃₁ and C₃₃ botryococcane homologues and other unusual branched alkanes possibly derived from green algae. All of the samples are immature. Overall, molecular and microscopic examination of the stratigraphic succession of the Maoming oil shale suggests a shallow, lacustrine environment within which peats were deposited. This lake subsequently deepened to support abundant algal populations, especially dinoflagellates, culminating in a dominance of botryococcoid algae.     

Biomarker distributions in asphaltenes and kerogens analysed by flash pyrolysis-gas chromatography-mass spectrometry

Biomarker distributions in a suite of asphaltenes and kerogens have been analysed by flash pyrolysis directly coupled to a GCMS system. Attention has been focussed on biomarkers of the sterane and triterpane types. The sample suite under investigation consists of sediments with different kerogen types and some crude oils. Biomarker distributions in the pyrolysates have been compared with the “free” biomarkers in the corresponding saturated hydrocarbon fractions.The analyses show significant differences between the distributions of the free biomarkers and those in the pyrolysates. The latter have lower amounts of steranes while diasteranes are absent or present at low concentrations only. In the triterpane traces a shift of maximum intensity from C₃₀ (free compounds) to C₂₇/C₂₉ is observed. Furthermore, the pyrolysates contain a set of triterpenes (not present among the free compounds), and there is a selective loss of “non-regular” triterpanes that are present in the saturated hydrocarbon fractions. The observed differences between pyrolysates and free hydrocarbons can be explained partly by the processes occurring during pyrolysis such as bond rupture and subsequent stabilisation of primary pyrolysis products. To a certain extent these differences also show that maturation processes occurring in sediments have effects on free biomarker molecules different from those on molecules that are enclosed in a macromolecular matrix (kerogen or asphaltenes).Differences between biomarker distributions of asphaltene and kerogen pyrolysates are relatively small. A comparison with the pyrolysates from extracted whole sediments suggests that these differences are mainly caused by interactions between the organic material and the mineral matrix during pyrolysis.Oil asphaltenes behave differently from sediment asphaltenes as their pyrolysates are more similar to the corresponding saturated hydrocarbon fractions, i.e. the differences described above are observed to a much smaller extent. This different behaviour appears to be the result of coprecipitation of a part of the maltene fraction with the oil asphaltenes.     

威海市杨家滩水源地地下水资源评价

本文分析了威海市杨家滩不源地第四系冲洪积－海相沉积物分规律和水文地质特征；在此基础上，应用有限单元方法进行了地下水量评价和预测水源地地下水位的变化趋势；提出了最优开采方案。     

Limestone weathering in Eastern Australia. Part 2: Surface micromorphology study

Results from long term microerosion meter (MEM) studies indicate that microenvironments are characterized by different erosion rates. A complementary study, carried out on the same sites, examines the microscale morphology in each environment. Optical and scanning electron microscopy were used to identify a range of features thought to reflect different processes. Under subaerial conditions micromorphology is dominated by biological weathering features owing to the presence of microflora. Sites permanently covered by soil or stream water have only dissolution etch features, though stream sites may exhibit microfractures. Sites with periodic exposure exhibit both dissolution and biological etch features. The natural environment is more accurately reflected by allowing some microflora colonization of MEM sites rather than preventing colonization by artificial means.     

Physical,radiative, and dynamical processes within a nighttime marine stratus cloud

Observations taken by aircraft and conventional platforms are used to investigate dynamical, physical, and radiative processes within a marine stratus cloud during the Canadian Atlantic Storms Program (CASP) II field project which took place over the east coast of Canada. Stratus which formed over the ocean on February 6, 1992 during the nighttime, is studied to analyze cloud top and base processes. The cloud was supercooled during the study period. Fluctuations and fluxes are calculated along constant flight altitude legs approximately 100 km long in space. The scales of structures larger than 5 km are removed from the analysis using a running average technique. Droplet spectra obtained by a forward scattering spectrometer probe (FSSP) were used in a 1-D radiative transfer model to calculate infrared (IR) fluxes and radiative heating rates. A heat conservation equation was used to estimate vertical air velocity (w _a ) within the cloud. The results showed that, because of a warmer ocean surface, significant moisture and heat were transferred from the ocean surface to the boundary layer. The cloud base was at about 400 m height and the top was at about 1.4 km.w _a at the cloud base was estimated about 5 cm s^–1. Strong IR cooling rate at the cloud top was calculated to be 75°C day^–1 for a 100 m thick layer. Negative skewness inw _a , suggesting narrow downdrafts, was likely due to radiative cooling at the cloud top. The entrainment velocity was found to be about 1.5 cm s^–1 at cloud top. Mean moisture and heat fluxes within the cloud were estimated to be comparable to those from the ocean surface. Vertical air velocity at the cloud top due to radiative cooling was found to be about –40 cm s^–1.     

石家庄市地下水污染及其污染质排放的最优化控制

文章指出不考虑地域、条件,一律采用《工业“三废”排放试行标准》的不合理性。提出了用负荷控制来代替目前采用的污染质排放的浓度控制、总量控制,并从石家庄市地下水污染现状出发,建立了以该市地下环境系统最大限度容纳污染质为目标的线性最优化模型;得出该市防止地下水污染的排放浓度;求得了污水允许渗入量区间和地下水开采模数区间。     

基于GIS的单元簇遗传建模及其在区域矿产预测中的应用

论述一种GIS支持下的基于"单元簇”概念和遗传建模的多源地学信息综合分析方法及在多目标矿产预测中的应用.在以往矿产定量预测中,根据随机抽样思想进行单元划分,对空间信息利用不够充分.用单元的空间组合("单元簇”)代替单元作为定量类比的基本单位,从而能较好实现地质变量值及其所反映的局部地质空间结构的定量类比;将单元作为GIS区图元,利用GIS空间分析功能实现对单元及单元簇的管理和操作;以已知样品判对率最大为适应值计算准则,用遗传算法建立线性判别函数,可快速有效地实现多目标矿产定位预测.以新疆康古尔塔格地区金矿预测实例说明了其应用效果.     

生产矿山矿产资源储量分类的探索与实践

本文主要介绍了生产矿山按<固体矿产资源/储量分类>国家标准对资源储量进行分类所作的一些探索与实践体会,特别是对可行性评价阶段划分和经济意义属性的分析,从生产矿山的实际情况出发进行了探讨.     

关于"十五"期间浙江省国土资源开发利用与保护的措施建议

文章通过对我省土地和矿产资源开发利用的现状分析,指出了土地资源管理存在的主要问题,并提出了在"十五"期间应采取的对策和保护措施建议.