羌塘盆地侏罗系碎屑岩储集层综合评价

运用储层综合评判分析方法对羌塘盆地侏罗系碎屑岩储集层进行分析和评价。首先选择影响储层性质的8种参数,包括定性参数,如岩性、成岩作用、储集空间类型和定量参数,如储层厚度、孔隙结构、物性等,对其进行单因素评价。在此基础上,根据各单因素对储层贡献的大小,确定各单因素的加权系数。最后,利用评判分析方法,计算各剖面的综合判别得分。综合判别分析评价表明,北羌塘坳陷中部、东部和中央隆起带北缘发育好储层;北羌塘坳陷西部发育中等储层;而南羌塘坳陷储层较差。     

汶川特大地震后成都盆地内隐伏断层活动性分析

成都盆地内主要有3条隐伏的活动断裂带,包括大邑断裂带、蒲江-新津断裂带和龙泉山断裂带,它们在第四纪都表现出了一定的活动性."512"汶川特大地震后,笔者实地考察的结果表明,在汶川特大地震中成都盆地中的隐伏断裂没有产生新的活动性,目前成都盆地不存在发生特大地震的危险性,是安全的.     

塔里木盆地塔河地区下石炭统巴楚组沉积演化

以塔里木盆地加里东期和海西两期构造运动为背景,结合现有的岩心、露头、测井、录井和地震资料,对巴楚组可识别出早期的辫状河三角洲沉积,中期的渴湖沉积和盐湖沉积,以及晚期的咸化溻湖沉积。本文分别从横向上和纵向上对塔河地区巴楚组沉积演化进行深入分析;总结了巴楚组构造运动与沉积响应之间的关系,以期为该地区的下石炭统巴楚组的进一步勘探提供科学依据。     

准噶尔盆地西北缘三叠系层序地层与隐蔽油气藏勘探

层序地层学及层序地层原理指导下的地震资料解释为地层、岩性油气藏勘探提供了理论和技术支持。为配合准噶尔盆地西北缘油气勘探从克乌断裂带上盘向下盘、从构造油气藏向地层、岩性等隐蔽油气藏的转变,利用陆相层序地层学理论和地球物理资料,将三叠系划分为1个二级层序、5个三级层序和8个体系域,进而总结出拗陷完整型和拗陷残缺型两种层序类型。结合测井约束地震反演和井间沉积对比,探讨了三叠系砂体结构和湖侵体系域地层超覆、湖退体系域及最大湖泛面附近小规模滑塌浊积体岩性透镜体等5种圈闭发育模式。油气成藏综合条件分析指出有效圈闭和油源断层的识别是制约斜坡带岩性油气藏勘探的关键。     

柴达木盆地西南部砂6井第三系沉积相研究

结合前人的研究成果,运用野外地质剖面、测井相标志的研究方法,对柴达木盆地西南第三系沉积相进行了较全面、系统的研究,描述了柴达木盆地砂6井第三系主要发育的三种沉积相及发育的主要类型,指出了研究区内有利于油气生成和储集的沉积相类型。     

Geochemistry of the Mian-Lue ophiolites in the Qinling Mountains, central China: Constraints on the evolution of the Qinling orogenic belt and collision of the North and South China Cratons

The Anzishan ophiolite, a typical ophiolitic block of early Carboniferous age in the Mian-Lue suture zone of the Qinling Mountains, central China, consists of amphibolites/metabasalts, gabbros and gabbroic cumulates. All of these rocks, as well as those in the Hunshuiguan-Zhuangke (HZ) block, have compositions similar to normal MORB and back-arc basin basalts (BABB) with high ε_Nd(t) values, indicating that they were derived from a depleted mantle source. The Mian-Lue suture zone also contains blocks of other lithologies, e.g., rift volcanic rocks in the Heigouxia block and arc volcanic rocks in the Sanchazi block. Although they are in fault contact with each other, the presence of these different blocks in the Mian-Lue suture zone may represent a complete Wilson cycle, from initial rifting to open ocean basin to final subduction and continent-continent collision, during the late Paleozoic-early Triassic. In this region, the North and South China Cratons were separated by Paleo-Tethys at least until the early Carboniferous, and final amalgamation of both cratons along the Qinling orogenic belt took place in the Triassic.     

Provenance of late Palaeozoic metasediments of the Patagonian proto-Pacific margin (southernmost Chile and Argentina)

In this provenance study of late Palaeozoic metasediments of the Eastern Andean Metamorphic Complex (EAMC) along the south Patagonian proto-Pacific margin of Gondwana, the palaeogeological setting of the continental margin in Devonian–Carboniferous and Permian times is reconstructed. The study is based on detrital heavy mineral contents, chemical compositions of tourmaline grains, and whole rock element and Nd-Sr isotopic compositions. Element and isotopic compositions reveal that Devonian–Carboniferous metaturbidites deposited before the development of a Late Carboniferous–Permian magmatic arc along the margin were mainly fed from felsic, recycled, old continental rocks. The last recycling phase involved erosion of metasediments that were exposed in Patagonia. Feeder systems to the basin cut either through epidote-rich or garnet-rich metasediments. In Permian time, EAMC metaturbidites were deposited next to the evolving magmatic arc and were derived from felsic, crustal rocks. Two provenance domains are recognised. The metasediments of the northern one are chemically similar to those of the Devonian–Carboniferous metasediments. This domain was fed from the metasedimentary host rocks of the magmatic arc. The southern domain probably was fed from the arc proper, as indicated mainly by the dominance of metaplutonic lithic fragments, abundant detrital biotite, and the major element composition of the metasediments.     

New basin modelling results from the Polish part of the Central European Basin system: implications for the Late Cretaceous–Early Paleogene structural inversion

Combined subsidence and thermal 1D modelling was performed on six well-sections located in the north-western Mid-Polish Trough/Swell in the eastern part of the Central European Basin system. The modelling allowed constraining quantitatively both the Mesozoic subsidence and the magnitude of the Late Cretaceous–Paleocene inversion and erosion. The latter most probably reached 2,400 m in the Mid-Polish Swell area. The modelled Upper Cretaceous thickness did not exceed 500 m, and probably corresponded to 200–300 m in the swell area as compared with more than 2,000 m in the adjacent non-inverted part of the basin. Such Upper Cretaceous thickness pattern implies early onset of inversion processes, probably in the Late Turonian or Coniacian. Our modelling, coupled with previous results of stratigraphic and seismic studies, demonstrates that the relatively low sedimentation rates in the inverted part of the basin during the Late Cretaceous were the net result of several discrete pulses of non-deposition and/or erosion that were progressively more pronounced towards the trough axis. The last phase of inversion started in the Late Maastrichtian and was responsible for the total amount of erosion, which removed also the reduced Upper Cretaceous deposits. According to our modelling results, a Late Cretaceous heat-flow regime which is similar to the present-day conditions (about 50 mW/m²) was responsible for the observed organic maturity of the Permian-Mesozoic rocks. This conclusion does not affect the possibility of Late Carboniferous–Permian and Late Permian–Early Triassic thermal events.     

Strain localization due to structural in-homogeneities in the Central European Basin System

The large-scale crustal deformations observed in the Central European Basin System (CEBS) are the result of the interplay between several controlling factors, among which lateral rheological heterogeneities play a key role. We present a finite-element integral thin sheet model of stress and strain distribution within the CEBS. Unlike many previous models, this study is based on thermo-mechanical data to quantify the impact of lateral contrasts on the tectonic deformation. Elasto-plastic material behaviour is used for both the mantle and the crust, and the effects of the sedimentary fill are also investigated. The consistency of model results is ensured through comparisons with observed data. The results resemble the present-day dynamics and kinematics when: (1) a weak granite-like lower crust below the Elbe Fault System is modelled in contrast to a stronger lower crust in the area extending north of the Elbe Line throughout the Baltic region; and (2) a transition domain in the upper mantle is considered between the shallow mantle of the Variscan domain and the deep mantle beneath the East European Craton (EEC), extending from the Elbe Line in the south till the Tornquist Zone. The strain localizations observed along these structural contrasts strongly enhance the dominant role played by large structural domains in stiffening the propagation of tectonic deformation and in controlling the basin formation and the evolution in the CEBS.     

High-resolution seismic analysis of the coastal Mecklenburg Bay (North German Basin): the pre-Alpine evolution

The pre-Alpine structural and geological evolution in the northern part of the North German Basin have been revealed on the basis of a very dense reflection seismic profile grid. The study area is situated in the coastal Mecklenburg Bay (Germany), part of the southwestern Baltic Sea. From the central part of the North German Basin to the northern basin margin in the Grimmen High area a series of high-resolution maps show the evolution from the base Zechstein to the Lower Jurassic. We present a map of basement faults affecting the pre-Zechstein. The pre-Alpine structural evolution of the region has been determined from digital mapping of post-Permian key horizons traced on the processed seismic time sections. The geological evolution of the North German Basin can be separated into four distinct periods in the Rerik study area. During Late Permian and Early Triassic evaporites and clastics were deposited. Salt movement was initiated after the deposition of the Middle Triassic Muschelkalk. Salt pillows, which were previously unmapped in the study area, are responsible for the creation of smaller subsidence centers and angular unconformities in the Late Triassic Keuper, especially in the vicinity of the fault-bounded Grimmen High. In this area, partly Lower Jurassic sediments overlie the Keuper unconformably. The change from extension to compression in the regional stress field remobilized the salt, leading to a major unconformity marked at the base of the Late Cretaceous.