用于监控多移动目标的电子地图系统

介绍了一种监控移动目标的电子地图系统，该系统利用独特的方法对地图文件进行组织，该方法易于程序管理和查找地图文件，并可动态添加地图文件，系统采用的串口通信方式使用方法灵活，应用简便，实际应用结果表明系统可靠，运行稳定。     

Direct georeferencing of airborne LiDAR data in national coordinates

The topographic mapping products of airborne light detection and ranging (LiDAR) are usually required in the national coordinates (i.e., using the national datum and a conformal map projection). Since the spatial scale of the national datum is usually slightly different from the World Geodetic System 1984 (WGS 84) datum, and the map projection frame is not Cartesian, the georeferencing process in the national coordinates is inevitably affected by various geometric distortions. In this paper, all the major direct georeferencing distortion factors in the national coordinates, including one 3D scale distortion (the datum scale factor distortion), one height distortion (the earth curvature distortion), two length distortions (the horizontal-to-geodesic length distortion and the geodesic-to-projected length distortion), and three angle distortions (the skew-normal distortion, the normal-section-to-geodesic distortion, and the arc-to-chord distortion) are identified and demonstrated in detail; and high-precision map projection correction formulas are provided for the direct georeferencing of the airborne LiDAR data. Given the high computational complexity of the high-precision map projection correction approach, some more approximate correction formulas are also derived for the practical calculations. The simulated experiments show that the magnitude of the datum scale distortion can reach several centimeters to decimeters for the low (e.g., 500 m) and high (e.g., 8000 m) flying heights, and therefore it always needs to be corrected. Our proposed practical map projection correction approach has better accuracy than Legat’s approach,¹ but it needs 25% more computational cost. As the correction accuracy of Legat’s approach can meet the requirements of airborne LiDAR data with low and medium flight height (up to 3000 m above ground), our practical correction approach is more suitable to the high-altitude aerial imagery. The residuals of our proposed high-precision map projection correction approach are trivial even for the high flight height of 8000 m. It can be used for the theoretical applications such as the accurate evaluation of different GPS/INS attitude transformation methods to the national coordinates.     

A GEOMETRIC ALGORITHM FOR TILTED-CAMERA PERSPECTIVE PROJECTION AND THE COMPARISON WITH EXTERNAL PERSPECTIVE PROJECTION

ABSTRACT

A geometric algorithm for Tilted-Camera Perspective (TCP) projection is proposed in this paper based on the principle of perspective projection. According to that, the difference between TCP projection and External Perspective (EXP) projecton is analyzed. It is put forward prerequisites making these two projections were compatible, and some examples are given.     

具有抵偿面的GPS基线向量网任意带高斯投影模型研究

通过GPS技术获取的空间基线向量和坐标信息是建立在WGS-84坐标系下的,无法直接应用于工程实际。因此使用GPS基线向量网必须将其从WGS-84坐标系转换到测区的平面坐标系统中,这就需要构造一个具有抵偿面的任意带高斯投影模型,来控制和减小边长投影变形。     

铁路测量中坐标系的建立与转换

在铁路测量中,长度投影变形要求小于2．5cm／km。但是由于铁路为典型的线性工程,通常横跨多个投影带,因此采用国家标准3。带难以满足铁路测量精度要求,本文通过分析高斯投影长度变形,提出分段建立独立坐标系的方法,控制长度投影变形,满足精度要求,最后介绍利用GlobalMapper软件实现两个独立坐标系的转换。     

城市坐标系的建立与申报

为了满足城市建设对测绘基准的要求,需建立相对独立的平面坐标系,我国测绘法等相关法律法规对独立平面坐标系的建立及管理有着明确的要求,本文结合新疆某县城相对独立平面坐标系的建立技术方案、申报材料准备、申报组织以及发布等方面进行了详细论述,希望能为测绘同行和测绘管理单位建立城市相对独立平面坐标系起到一定的参考作用。     

国家经济地图集基础地理框架的建立

以新世纪版《中华人民共和国国家经济地图集》的编研为背景,探讨了新世纪地学研究和测绘地理信息技术条件下经济地图集基础地理框架建立的若干问题。针对地图集的多尺度、多分辨率、多时态及内容的多样性等特点,通过对比与需求分析,重点探讨了地图集的地图投影、比例尺与分幅、地图定向及地理底图的设计与应用,并最终确定了地图集基础地理框架方案。     

利用单相机和神经网络估计的室内定位导航

由于三维场景与二维图像之间存在着非线性和高度复杂的关系,使用相机对用户的位置进行估计需要建立复杂的数学模型。针对该问题,本文提出了使用神经网络估计的单相机进行室内定位的方法。室内定位系统的主要优点是LED能够使用可见光通信发送其位置信息。首先,该方法充分利用LED光线的投影不变性,借助图像传感器通信（ISC）完成虚拟直线的构建;然后,运用神经网络估计从该虚拟直线中提取出相机的方向信息;最后,使用一个简单数学方程估计用户位置。仿真试验考虑了4种情形,结果表明,本文提出的方法性能优于同类方法,对于一个房间内的大部分地方,定位误差在35 mm以内。     

浅析七参数坐标系转换在ArcGIS中的应用

利用Arc GIS的投影变换功能进行坐标系转换,介绍了转换过程中怎样使用七参数模型、布尔莎七参数模型及计算方法,对于抬高投影面和任意中央子午线建立的地方坐标系,在转换过程中要注意哪些操作。     

兰勃特投影在东西向高速铁路中的应用研究

针对在东西向的高速铁路工程项目建设过程中,现今采用的高斯投影所能控制的范围小,需要建立较多投影带,投影带边缘变形大,各投影带间坐标转换复杂,不利于数据共享等突出问题,本文提出采用兰勃特投影的新方式。首先介绍切、割兰勃特投影的原理和坐标转换方法;其次通过分析高斯投影和兰勃特投影在郑徐高铁项目中的对比应用,得出兰勃特投影更适合东西向高速铁路工程坐标系统建设的结论。对类似线形工程项目具有一定的指导意义。