渤海悬浮颗粒物的三维输运模式 I.模式

为了长时间,大范围研究渤海中悬浮物的输运规律,研究应用并改造了备国汉堡大学的粒子追踪悬浮物输运的三维模式,模式中考虑了风、气压等气象要素以外海传入的潮波作用下的三维正压海流对悬浮颗粒物的输运．同时考虑了悬浮颗粒物的学降及再悬浮机制和底质中的细颗粒物的运动,将风浪的作用引入了悬浮物输运的计算,数值模式应用的粒五追踪方法,能较好地反映悬浮物浓度的迅速变化。     

南海南部大陆架14ka来微型双壳类营养结构与海流活动

双壳类食悬浮物类与食沉积物类的发育变化是反映水动力环境的一种指标。对南海南部NS93- 1 2 - 58柱样 1 4ka来微型双壳类营养结构分析表明 ,晚更新世末次冰期向冰后期全新世转化阶段 ,食沉积物类一度较为发育 ,表明南海南部表层环流很不活跃 ,从这一转化阶段到全新世早期 ,双壳类食悬浮物类与食沉积物类的比例有规律地变大 ,表明随着气候转暖 ,海水温度增高 ,海平面上升 ,海流作用显著增强。该柱样整样分析表明 ,双壳类食悬浮物类占据着明显的优势 ,显示了 1 4ka来南海海流作用一直比较强烈。在全新世中晚期 ,双壳类主要栖息在次表层水团的海底 ,仍以食悬浮物类为主 ,可能与南海南部陆坡上升流发育有关     

The intertidal erosion rate of cohesive sediment: a case study from Long Island Sound

Over the past decades, many attempts have been made to generate useful bottom erosion models for the study of cohesive sediment movement. This study addresses some of the key questions involved in determining the functional relationship between erosion rate and bottom shear stress. Current, wave, and turbidity data were collected from a bottom mounted instrument array in a moderately energetic estuarine environment. The bottom shear stress was calculated from a wave–current interaction model. The erosion rate was derived from the observed sediment concentration using a vertical mixing model. Examination of the relationship between erosion rate and bottom stress showed that the erosion rate varied at intertidal frequency. When averaged over the tidal fluctuation, the erosion rate remained approximately constant at low stress, but increased sharply when the shear stress rose above a critical value. This suggests two-stage erosion. The bed has a layered structure, in which a thin layer of loose, high water content material overlies a more consolidated bed. The top layer of high water content material (fluff) was easily disturbed and re-suspended by tidal currents, but the consolidated bottom layer was eroded only under conditions of high shear stress.     

SYF1-1型海洋金属防腐装置

SYFl—1型海洋金属防腐装置是一种用于潮汐发电设备、海洋石油平台、输送海水管道、船舶等海洋金属防腐的装置。文中对该装置的工作原理、组成、主要技术性能、特点以及实现方法作了概要描述。     

An inexpensive instrument for measuring benthic current velocity and direction at sea

An instrument which measures the velocity and direction of benthic water currents at depths of up to 80 m is described. Characteristics of this meter include: (i) readings are not affected by water flow during sinking or retrieval; (ii) it is portable; (iii) it operates unattended; (iv) it is inexpensive; and (v) it requires only simple maintenance. A timing circuit which operates two time periods in succession is used to activate and de-activate a revolution counter and a fluidfilled compass which are mounted on a special frame and vane system. In the field, the instrument accurately measured average current velocities of up to 6 m s⁻¹. Data are presented which illustrate the usefulness of this instrument in describing the velocity and direction of benthic currents along the east coast of Australia and demonstrate a positive correlation between benthic current velocity and catch rates of the commercially-exploited spanner crab Ranina ranina.     

珠江河口虎门的地貌动力学研究

以野外现场调查、数值模拟和前人研究成果综合分析虎门的地貌动力学特征。因峡口上、下游水域开阔,涨落潮过程中发育着强大的双向不对称射流系统;由于峡口区流速最大,发育着冲刷深槽,而峡口的上、下游因流速降低,泥沙有规律地沉积,形成了涨潮三角洲与落潮三角洲堆积体,出现纵向上“马鞍”形断面特征和横向上“槽-脊-滩”的地貌特征,与其动力特征相适应。     

多种数字海洋地理环境信息的融合与可视化的局部实现

以潮汐、潮流和海浪数值的计算技术和数字海底地形模型的构造方法为基础,应用层次细节模型和三维渲染技术,完成了近岸海洋环境保障的多种数字海洋地理环境信息的融合与可视化的局部实现,为今后此领域的研究提供了理论和经验基础。     

Southwestward intrusion of korea strait bottom cold water observed in 2003 and 2004

Hydrographic surveys were carried out four times in the western channel of the Korea Strait in March and August 2003 and in June and November 2004. The bottom cold water, which was lower than 10°C, appeared in the channel trough except in March 2003. It flowed southwestward along the shelf of Korean coasts in August 2003 and in November 2004. The width and the maximum speed of the intrusion current were about 20 km and approximately 25 cm s^-1, respectively, off Ulsan, Korea. The volume transport of the bottom cold water was estimated 0.019 Sv (Sv≡10⁶ m³ s^-1) in August 2003 and 0.026 Sv in November 2004.     

Field measurements and monitoring of wastewater discharge in sea water

This paper reports a study of the field measurements and monitoring of wastewater discharge in sea water at Bari East (Italy). A wastewater sea outfall system is an integral and fundamental part of each wastewater treatment with ultimate sink in the sea water. The design of a water treatment plant and wastewater outfall must take into account the use of the environmental water, the values of physicochemical parameters to be respected in order to safeguard the use itself and the quality of the environmental water where wastewater is issued. In the present study measurements of sea current velocity components were carried out with a VM-ADP (Vessel-Mounted Acoustic Doppler Profiler). Salinity, wind directions and velocities were assessed with, for one survey, the total faecal coliforms and other biochemical parameters. It was emphasized that the measurements necessary for monitoring cannot be concentrated in the wastewater outfall pipe zone only, but should be extended to a neighbouring area of the outfall pipe, with an extension depending on the wastewater discharge, the polluting charge and the magnitude of the sea currents and the winds typical of the zone of interest. The analyses presented in this paper confirm that the sea zones close to the wastewater outfall pipe are particularly sensitive and vulnerable. Such results must be considered in the planning of a wastewater outfall pipe.     

Quantifying the influence of channel sinuosity on the depositional mechanics of channelized turbidity currents: A laboratory study

Here we present results from a suite of laboratory experiments that highlight the influence of channel sinuosity on the depositional mechanics of channelized turbidity currents. We released turbidity currents into three channels in an experimental basin filled with water and monitored current properties and the evolution of topography via sedimentation. The three channels were similar in cross-sectional geometry but varied in sinuosity. Results from these experiments are used to constrain the run-up of channelized turbidity currents on the outer banks of moderate to high curvature channel bends. We find that a current is unlikely to remain contained within a channel when the kinetic energy of a flow exceeds the potential energy associated with an elevation gain equal to the channel relief; setting an effective upper limit for current velocity. Next we show that flow through bends induces a vertical mixing that redistributes suspended sediment back into the interiors of depositional turbidity currents. This mixing counteracts the natural tendency for suspended sediment concentration and grain size to stratify vertically, thereby reducing the rate at which sediment is lost from a current via deposition. Finally, the laboratory experiments suggest that turbidity currents might commonly separate from channel sidewalls along the inner banks of bends. In some cases, sedimentation rates and patterns within the resulting separation zones are sufficient to construct bar forms that are attached to the channel sidewalls and represent an important mechanism of submarine channel filling. These bar forms have inclined strata that might be mistaken for the deposits of point bars and internal levees, even though the formation mechanism and its implications to channel history are different.