珠江流域降水集中度时空变化特征及成因分析

基于珠江流域内43个常规气象站点1960~2012年的逐日降水资料,计算了流域内各站点长期降水集中度(LCI)和逐年降水集中度(ACI);采用Mann-Kendall趋势检验法和Sen’s坡度检验法检测ACI时间上的变化趋势;同时采用反距离权重插值法(IDW)对LCI的区域特征和ACI的变化趋势进行空间插值以分析降水集中度的时空分布规律;采用随机森林(RF)算法对降水集中度的影响因子进行重要度分析。结果表明:(1)珠江流域逐年降水集中度ACI的年际变化不明显,东南部呈上升趋势,西北部呈下降趋势;(2)珠江流域西北部长期降水集中度LCI值偏小,即降水分布较平均;东南部长期降水集中度LCI值偏大,即降水较集中,表明该地区降水极值情况发生的几率相对较高,该空间分布趋势可能是受距离海洋的远近及海拔的影响;(3)众多气候影响因子中,东亚夏季季风(EASMI)对珠江流域的降水集中度影响最明显。     

Numerical implementation of the installation/mooring line and application to analyzing comprehensive anchor behaviors

With the application of innovative anchor concepts and advanced technologies in deepwater moorings, anchor behaviors in the seabed are becoming more complicated and pose a great challenge to the analytical methods. In the present work, a large deformation finite element (FE) analysis employing the coupled Eulerian–Lagrangian technique is performed to simulate the installation/mooring line, and then is applied to analyzing comprehensive anchor behaviors in the seabed. By connecting cylindrical units with each other using connector elements, the installation/mooring line is constructed. With the constructed installation/mooring line, FE simulations are carried out to investigate comprehensive anchor behaviors in the seabed, including long-distance penetration of drag anchors, keying of suction embedded plate anchors and non-catastrophic behavior of gravity-installed anchors. Through comparative studies, the accuracy of the proposed method is well examined. A parametric study is also undertaken to quantify the effects of the frictional coefficient, initial embedment depth, and soil weight on the profile of the embedded anchor line and the shackle load. The present work demonstrates that the proposed FE model, which incorporates the installation/mooring line and the anchor, is effective in analyzing the comprehensive anchor behaviors in the seabed.     

基于客观分析的多源卫星叶绿素a浓度产品融合方法研究

本文基于Aqua/MODIS、Terra/MODIS和Envisat/MERIS多源卫星叶绿素a浓度产品,研究了客观分析融合方法,制作了西北太平洋海域(0°~50°N,100°~150°E)叶绿素a浓度融合产品,并从有效数据空间覆盖率和产品精度两个方面对融合方法进行了评价。与单传感器以及欧洲太空局发布的GSM模型业务化融合产品相比,客观分析融合产品空间覆盖率明显提高;与收集的2002-2012年间叶绿素a浓度实测数据比较,GSM模型业务化融合产品的匹配数据点为578个,偏差为-0.20 mg/m3,均方根误差为0.37 mg/m3,客观分析法融合产品的匹配数据点为1432个,偏差为-0.21 mg/m3,均方根误差为0.36 mg/m3。结果表明:本文研究的客观分析融合方法在保证融合产品精度的同时可显著提高产品的空间覆盖率,在海洋水色融合应用前景广阔。     

不同培养条件对三角褐指藻生长及其生物活性成分积累的影响

以三角褐指藻(Phaeodactylum tricornutum)为研究材料,比较了Na NO3、NH4HCO3和CO(NH2)2为氮源的两种培养基(m L1和ASW培养基)对其生长和生物活性成分(岩藻黄素、金藻昆布糖和二十碳五烯酸(C20:5,EPA))时相积累的影响,同时分析了脂肪酸组成和总脂含量的变化。结果表明:以m L1培养基培养时,三角褐指藻的生物质质量浓度明显高于ASW培养基培养时的生物质质量质量浓度,尿素优于其他两种氮源,最大生物质质量质量浓度为3.7 g/L。不同培养条件下岩藻黄素含量的时相变化规律一致,均随着培养时间的延长呈现先增加后减少的趋势,其最高积累量分别为:13.27 mg/g(Na NO3)、13.23 mg/g(CO(NH2)2)和13.89 mg/g(NH4HCO3)(m L1);13.2 mg/g(Na NO3)、14.92 mg/g(CO(NH2)2)和13.6 mg/g(NH4HCO3)(ASW),由此可知氮源对岩藻黄素积累量影响不大。金藻昆布糖含量随着培养时间延长逐渐增加,其最大积累量分别为9.82 mg/g(NH4HCO3)(m L1)和8.59 mg/g(Na NO3)(ASW)。不同培养条件下其总脂含量变化不显著,均在培养末期达到最大值,分别为24.18%(NH4HCO3)(m L1)和23.79%(Na NO3)(ASW);其主要脂肪酸组成为:豆蔻酸(C14:0)、棕榈酸(C16:0)、棕榈油酸(C16:1)、硬脂酸(C18:0)、油酸(C18:1)、亚油酸(C18:2)、花生一烯酸(C20:1)、木焦油酸(C24:0)和EPA,其中,EPA含量随着培养时间延长逐渐下降,尿素最有利于EPA的积累。     

山东省重要地质遗迹自然区划研究

地质遗迹区划是地质遗迹资源保护的基础,该文根据山东省重要地质遗迹资源的空间分异和山东省大地构造二级构造单元,划分出3个地质遗迹大区,再以其自然分布规律、遗迹形成时间、空间、成因和地质构造单元的关联性进一步划分出8个地质遗迹区和24个地质遗迹集中区,从而建立了山东省重要地质遗迹自然区划系统,亦为地质遗迹保护提供了可靠的科学依据。     

西藏改则县多龙矿集区发现岩墙岭蛇绿岩残片

西藏班公湖-怒江缝合带北缘多龙矿集区是青藏高原新近发现的具有超大型远景的、典型的富金斑岩型铜矿集区,其成岩成矿地质背景是解决班公湖-怒江洋构造演化的关键问题之一。近年来的区域地质调查研究发现,多龙矿集区南侧出露岩墙岭蛇绿岩残片,应该是班公湖-怒江蛇绿岩带的重要组成部分。岩墙岭蛇绿岩主要由席状岩墙群、枕状玄武岩和硅质岩组成,整体呈棱形或透镜体状断续分布于侏罗系复理石沉积内,构成典型的网结状构造。糜棱岩普遍发育在岩墙岭蛇绿岩和围岩的接触部位。综合前人研究成果,初步认为多龙矿集区早白垩世成岩成矿作用应该形成于增生楔之上伸展拉张的构造环境。岩墙岭蛇绿岩的发现和确定进一步约束了多龙矿集区成岩成矿地质背景,同时为班公湖-怒江缝合带的延伸及其构造演化的研究提供了新的线索。     

Hybrid N-order Lagrangian Interpolation Eulerian?Lagrangian Method for Salinity Calculation

The Eulerian?Lagrangian method (ELM) has been used by many ocean models as the solution of the advection equation, but the numerical error caused by interpolation imposes restriction on its accuracy. In the present study, hybrid N-order Lagrangian interpolation ELM (LiELM) is put forward in which the N-order Lagrangian interpolation is used at first, then the lower order Lagrangian interpolation is applied in the points where the interpolation results are abnormally higher or lower. The calculation results of a step-shaped salinity advection model are analyzed, which show that higher order (N=3?8) LiELM can reduce the mean numerical error of salinity calculation, but the numerical oscillation error is still significant. Even number order LiELM makes larger numerical oscillation error than its adjacent odd number order LiELM. Hybrid N-order LiELM can remove numerical oscillation, and it significantly reduces the mean numerical error when N is even and the current is in fixed direction, while it makes less effect on mean numerical error when N is odd or the current direction changes periodically. Hybrid odd number order LiELM makes less mean numerical error than its adjacent even number order LiELM when the current is in the fixed direction, while the mean numerical error decreases as N increases when the current direction changes periodically, so odd number of N may be better for application. Among various types of Hybrid N-order LiELM, the scheme reducing N-order directly to 1st-order may be the optimal for synthetic selection of accuracy and computational efficiency.     

Metallogeny of the Baiyangping Lead‐Zinc Polymetallic Ore Concentration Area,Northern Lanping Basin of Yunnan Province,China

The Lanping Basin in the Nujiang‐Lancangjiang‐Jinshajiang (the Sanjiang) area of northeastern margin of the Tibetan Plateau is an important part of eastern Tethyan metallogenic domain. This basin hosts a number of large unique sediment‐hosted Pb‐Zn polymetallic deposits or ore districts, such as the Baiyangping ore concentration area which is one of the representative ore district. The Baiyangping ore concentration area can be divided into the east and west ore belts, which were formed in a folded tectogene of the India‐Asia continental collisional setting and was controlled by a large reverse fault. Field observations reveal that the Mesozoic and Cenozoic sedimentary strata were outcropped in the mining area, and that the orebodies are obviously controlled by faults and hosted in sandstone and carbonate rocks. However, the ore‐forming elements in the east ore belt are mainly Pb‐Zn‐Sr‐Ag, while Pb‐Zn‐Ag‐Cu‐Co elements are dominant in the west ore belt. Comparative analysis of the C‐O‐Sr‐S‐Pb isotopic compositions suggest that both ore belts had a homogeneous carbon source, and the carbon in hydrothermal calcite is derived from the dissolution of carbonate rock strata; the ore‐forming fluids were originated from formation water and precipitate water, which belonged to basin brine fluid system; sulfur was from organic thermal chemical sulfate reduction and biological sulfate reduction; the metal mineralization material was from sedimentary strata and basement, but the difference of the material source of the basement and the strata and the superimposed mineralization of the west ore belt resulted in the difference of metallogenic elements between the eastern and western metallogenic belts. The Pb‐Zn mineralization age of both ore belts was contemporary and formed in the same metallogenetic event. Both thrust formed at the same time and occurred at the Early Oligocene, which is consistent with the age constrained by field geological relationship.     

Early Cretaceous K-rich rhyolites from the Duolong Cu–Au deposit,southern Qiangtang,China: evidence for crustal growth

We report new zircon U–Pb age, Hf isotopic, and major and trace element data for rhyolites from the Duolong Ore Concentration Area of the Southern Qiangtang Terrane. Building on previous studies, we constrain the tectonic setting and propose a model to explain the geodynamics and crustal growth during regional magmatism in the Early Cretaceous. The analysed rhyolites yield laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) zircon U–Pb ages of 115 and 118 Ma. The rocks are K-rich (K₂O = 6.66–9.93 wt.%; K₂O/Na₂O = 8.2–19.7 wt.%), alkaline and peraluminous (A/CNK = 1.02–1.46), and are characterized by high SiO₂ contents (72.8–78.8 wt.%) similar to highly fractionated I-type granites. Fractionation of Fe–Ti oxides, plagioclase, hornblende, Ti-bearing phases, apatite, monazite, allanite and zircon contributed to the variations in major and trace element chemistry. High K₂O contents are likely due to partial melting of the continental crust. The samples have positive zircon εHf(t) values ranging from +7.1 to +11.2. These features, together with young zircon Hf crustal model ages of 489–721 Ma, indicate that the K-rich rhyolites were derived from juvenile lower crust with an input of a mantle-derived component. We suggest that the Early Cretaceous K-rich rhyolites formed in a continental arc setting during northward subduction of Bangong Co–Nujiang oceanic lithosphere. Basaltic magma underplating was responsible for vertical crustal growth, triggered by slab roll-back in the Duolong Ore Concentration Area in the Early Cretaceous.     

甘肃南部大水金矿集区找矿标志及找矿潜力分析

甘肃南部大水金矿集区金资源丰富,已累计探明金资源量150余吨。本文通过地面高精度磁测、水系沉积物测量、土壤测量以及大比例尺地质剖面、构造蚀变填图等多元勘探手段,总结归纳大水金矿集区成矿特征与规律,并得到以下找矿信息:区内二叠系、三叠系碳酸盐岩与金矿关系密切,地层对金矿起赋存定位作用;断裂构造对成矿起主导地位;岩浆活动与金矿成矿作用之间存在成因联系;蚀变对金矿化起控制作用;土壤测量所圈定的金异常与矿体对应程度高,土壤次生晕是该区找金的直接标志;中酸性侵入体能引起磁异常,而金成矿与中酸性岩体有密切时空关系。根据上述找矿标志,在格尔托金矿矿区新增金资源量10t;在格尔珂金矿深部不仅控制已知矿体的延深,并且发现数条厚大盲矿体,新增金资源量3t。