三维F－K域DMO方法及应用效果

在常速情况下，从三维时距方程出发，通过倾角代换，将三维倾角时差分裂为两个正交方向上的二维倾角时差，然后在这两个正交方向上分别做一次二维倾角时差校正，便可达到三维倾角时差校正的目的．应用实例表明这种三维ＤＭＯ分裂方法是切实有效的．     

A comment on the continuity equation model of slope profile development and its boundary conditions

The constant base boundary condition used by Kirkby to derive characteristic form solutions to the continuity equation are unlikely in practice. Constant form solutions relying on constant basal erosion are however more probable.     

The continuity equation slope model and basal boundary conditions: A further comment

Intermediates between a fixed basal elevation and a constant rate of downcutting throughout the slope profile are perhaps more realistic than either extreme case.     

无限域地基有限元分析的简化粘弹性边界

本文提出一种能用于无限域地基动、静力有限元分析的简单人工边界——粘弹边界，采用一层边界单元来实现。该边界弹簧部分采用弹性半空间Mindlin解计算，边界单元采用具有粘性阻尼的粘弹材料，通过确定合理的弹性模量、泊松比和粘性阻尼系数，不仅可以使边界单元能够模拟无限域远场的弹性恢复力，同时可以模拟粘性边界。通过算例分析，验证了该边界的有效性，它可用于土-结构动力相互作用分析。     

小块体重的多元线性回归方程在锡铁山铅锌矿床储量计算中的应用

从锡铁山铅锌矿床小块体重样品原始测定数据入手，运用数学地质中的回归分析，建立了本矿床的小块体重多元线性回归方程，为矿床储量计算提供了科学参数。利用回归方程法计算小块体重进而可以推广到所有贱金属矿床的储量计算中。     

Methods and applications of 3-D wave equation common-azimuth prestack migration

To tackle the difficulties of a 3-D full volume prestack migration based on the double-square-root (DSR) one-way wave equation in practical applications, the common-azimuth migration approach is first discussed using dual-domain wave propagators under the theoretical frame of crossline common-offset migration. Through coordinate transforming, a common-azimuth prestack tau migration technology that recursively continues the source and receiver wavefields and picks up the migrated results in the two-way vertical traveltime (tau) direction is developed. The migrations of synthetic data sets of SEG/EAGE salt model prove that our common-azimuth migration approaches are effective in both depth and tau domains. Two real data examples show the advantages of wave-theory based prestack migration methods in accuracy and imaging resolution over the conventional Kirchhoff integral methods. Translated from Oil Geophysical Prospecting, 2006, 41(6): 629–634 [译自: 石油地球物理勘探]     

利用天气数值预报产品建立贵州黔西南州分县温度预报方程的方法及应用

利用2002～2004年1～12月EC、T213天气数值产品的温度格点实时分析资料、预报资料以及贵州省黔西南州8个测站观测资料,从160个样本中筛选出相关较好的因子,利用多元回归统计模型,以及根据地理环境,天气形势分型造成的温度差值(ΔT)为逐步订正值,建立黔西南州分县温度预报方程。在2005年11月～2006年2月应用中取得较好效果,预报误差小于±3.0℃,平均误差1.3℃。     

双平方根单程波动方程叠前τ偏移方法

本文将常规双平方根（DSR）单程波动方程从深度域变换到双程垂直走时（τ）域，由此推导出可从数学上实现“沉降观测”的单程波DSR传播算子. 其递归波场延拓算法包含波数域针对常速背景的相移处理和空间域针对横向速度扰动的相位校正，可以应对上覆地层速度横向变化对构造成像的影响. 结合零炮检距、零时间成像条件，提出了在τ域进行波场延拓与成像的DSR方程叠前偏移新方法. 为了克服其全三维偏移算法在实际应用中可能面临的困难，本文采用稳相近似，在crossline常炮检距偏移理论基础上推导了实用的共方位角叠前τ偏移方法. 数值试验表明，DSR方程叠前τ偏移在强横向非均匀介质中的成像精度与分辨率优于传统的时间域成像技术.     

Automatic Interpretation of Magnetic Data Using Euler Deconvolution with Nonlinear Background

The voluminous gravity and magnetic data sets demand automatic interpretation techniques like Naudy, Euler and Werner deconvolution. Of these techniques, the Euler deconvolution has become a popular choice because the method assumes no particular geological model. However, the conventional approach to solving Euler equation requires tentative values of the structural index preventing it from being fully automatic and assumes a constant background that can be easily violated if the singular points are close to each other. We propose a possible solution to these problems by simultaneously estimating the source location, depth and structural index assuming nonlinear background. The Euler equation is solved in a nonlinear fashion using the optimization technique like conjugate gradient. This technique is applied to a published synthetic data set where the magnetic anomalies were modeled for a complex assemblage of simple magnetic bodies. The results for close by singular points are superior to those obtained by assuming linear background. We also applied the technique to a magnetic data set collected along the western continental margin of India. The results are in agreement with the regional magnetic interpretation and the bathymetric expressions.     

Stability and accuracy analysis of outer loop dynamics in real‐time pseudodynamic testing of SDOF systems

Real‐time pseudodynamic (PSD) testing is an experimental technique for evaluating the dynamic behaviour of a complex structure. During the test, when the targeted command displacements are not achieved by the test structure, or a delay in the measured restoring forces from the test structure exists, the reliability of the testing method is impaired. The stability and accuracy of real‐time PSD testing in the presence of amplitude error and a time delay in the restoring force is presented. Systems consisting of an elastic single degree of freedom (SDOF) structure with load‐rate independent and dependent restoring forces are considered. Bode plots are used to assess the effects of amplitude error and a time delay on the steady‐state accuracy of the system. A method called the pseudodelay technique is used to derive the exact solution to the delay differential equation for the critical time delay that causes instability of the system. The solution is expressed in terms of the test structure parameters (mass, damping, stiffness). An error in the restoring force amplitude is shown to degrade the accuracy of a real‐time PSD test but not destabilize the system, while a time delay can lead to instability. Example calculations are performed for determining the critical time delay, and numerical simulations with both a constant delay and variable delay in the restoring force are shown to agree well with the stability limit for the system based on the critical time delay solution. The simulation models are also used to investigate the effects of a time delay in the PSD test of an inelastic SDOF system. The effect of energy dissipation in an inelastic structure increases the limit for the critical time delay, due to the energy removed from the system by the energy dissipation. Copyright © 2007 John Wiley & Sons, Ltd.