Velocity profiles and bed shear stress over various bed configurations in a river bend

Vertical velocity profiles measured over various bed configurations (plane beds, ripples, and dunes) in. the meandering River South Esk, Glen Clova, Scotland are presented on semilogarithmic paper. Local bed shear stress and roughness height are calculated from the lowermost parts of the profiles using the Karman-Prandtl law of the wall; these parameters, and the geometrical properties of the profiles, are related to the various bed configurations. A graphical model is used to identify profiles developed on specific regions of dune geometry, in order to discriminate those profiles that define bed shear effective in transporting sediment over dunes. An assessment is made of the errors involved in estimating local mean velocity from extrapolating the law of the wall to the water surface. A Darcy-Weisbach friction coefficient is related to bed configuration and local stream power.     

Efficiency verification of a horizontal flow barrier via flowmeter tests and multilevel sampling

The remediation strategy for an industrial site located in a coastal area involves a pump and treat system and a horizontal flow barrier (HFB) penetrating the main aquifer. To validate the groundwater flow conceptual model and to verify the efficiency of the remediation systems, we carried out piezometric measurements, slug tests, pumping tests, flowmeter tests and multilevel sampling. Flowmeter tests are used to infer vertical groundwater flow directions, and base exchange index is used to infer horizontal flow directions at a metric scale. The selected wells are located both upstream and downstream of the HFB. The installation of the HFB produced constraints to the groundwater flow. A stagnant zone of contaminated freshwater floating over the salt wedge in the upper portion of the aquifer is detected downstream of the HFB. This study confirms that the adopted remediation system is efficiently working in the area upstream of the HFB and even downstream in the bottom part of the aquifer. At the same time, it has also confirmed that hot spots are still present in stagnant zones located downstream of the HFB in the upper part of the aquifer, requiring a different approach to accomplish remediation targets. The integrated approach for flow quantification used in this study allows to discriminate the direction and the magnitude of groundwater fluxes near an HFB in a coastal aquifer. Copyright © 2012 John Wiley & Sons, Ltd.     

Understanding of hydraulic properties from configurations of stochastically distributed fracture networks

A systematic investigation of the effect of configurations of stochastically distributed fracture networks on hydraulic behaviour for fractured rock masses could provide either quantitative or qualitative correlation between the structural configuration of the fracture network and its corresponding hydraulic behaviour, and enhance our understanding of appropriate application of groundwater flow and contaminant transport modelling in fractured rock masses. In this study, the effect of block sizes, intersection angles of fracture sets, standard deviations of fracture orientation, and fracture densities on directional block hydraulic conductivity and representative elementary volume is systematically investigated in two dimensions by implementing a numerical discrete fracture fluid flow model and incorporating stochastically distributed fracture configurations. It is shown from this investigation that the configuration of a stochastically distributed fracture network has a significant quantitative or qualitative effect on the hydraulic behaviour of fractured rock masses. Compared with the deterministic fracture configurations that have been extensively dealt with in a previous study, this investigation is expected to be more practical and adequate, since fracture geometry parameters are inherently stochastically distributed in the field. Moreover, the methodology and approach presented in this study may be generally applied to any fracture system in investigating the hydraulic behaviours from configurations of the fracture system while establishing a ‘bridge’ from the discrete fracture network flow modelling to equivalent continuum modelling in fractured rock masses. Copyright © 2007 John Wiley & Sons, Ltd.     

A coupled model for prediction of settlement and gas flow in MSW landfills

Prediction of long‐term settlement and control of gas pollution to the environment are two principle concerns during the management of municipal solid waste (MSW) landfills. The behavior of settlement and gas flow in MSW landfills is complicated due to the combined effect of mechanical deformation of the solid skeleton and continuous biodegradation of the waste. A one‐dimensional settlement and gas flow model is presented in this paper, which is capable of predicting time evolution of settlement as well as temporal and spatial distribution of gas pressure within multi‐layered landfills under a variety of operating scenarios. The analytical solution to the novel model is evaluated with numerical simulation and field measurements. The resulting efficiency and accuracy highlight the capability of the proposed model to reproduce the settlement behavior and gas flow in MSW landfills. The influences of operating conditions and waste properties on settlement and gas pressure are examined for typical MSW landfills. Copyright © 2009 John Wiley & Sons, Ltd.     

Experimental and computational validation and verification of the Stokes–Darcy and continuum pipe flow models for karst aquifers with dual porosity structure

In our previous study, we developed the Stokes–Darcy (SD) model was developed for flow in a karst aquifer with a conduit bedded in matrix, and the Beavers–Joseph (BJ) condition was used to describe the matrix–conduit interface. We also studied the mathematical well‐posedness of a coupled continuum pipe flow (CCPF) model as well as convergence rates of its finite element approximation. In this study, to compare the SD model with the CCPF model, we used numerical analyses to validate finite element discretisation methods for the two models. Using computational experiments, simulation codes implementing the finite element discretisations are then verified. Further model validation studies are based on the results of laboratory experiments. Comparing the results of computer simulations and experiments, we concluded that the SD model with the Beavers–Joseph interface condition is a valid model for conduit–matrix systems. On the other hand, the CCPF model with the value of the exchange parameter chosen within the range suggested in the literature perhaps does not result in good agreement with experimental observations. We then examined the sensitivity of the CCPF model with respect to the exchange parameter, concluding that, as has previously been noted, the model is highly sensitive for small values of the exchange parameter. However, for larger values, the model becomes less sensitive and, more important, also produces results that are in better agreement with experimental observations. This suggests that the CCPF model may also produce accurate simulation results, if one chooses larger values of the exchange parameter than those suggested in the literature. Copyright © 2011 John Wiley & Sons, Ltd.     

Enhancing RUSLE to include runoff‐driven phenomena

RUSLE2 (Revised Universal Soil Loss Equation) is the most recent in the family of Universal Soil Loss Equation (USLE)/RUSLE/RUSLE2 models proven to provide robust estimates of average annual sheet and rill erosion from a wide range of land use, soil, and climatic conditions. RUSLE2's capabilities have been expanded over earlier versions using methods of estimating time‐varying runoff and process‐based sediment transport routines so that it can estimate sediment transport/deposition/delivery on complex hillslopes. In this report we propose and evaluate a method of predicting a series of representative runoff events whose sizes, durations, and timings are estimated from information already in the RUSLE2 database. The methods were derived from analysis of 30‐year simulations using a widely accepted climate generator and runoff model and were validated against additional independent simulations not used in developing the index events, as well as against long‐term measured monthly rainfall/runoff sets. Comparison of measured and RUSLE2‐predicted monthly runoff suggested that the procedures outlined may underestimate plot‐scale runoff during periods of the year with greater than average rainfall intensity, and a modification to improve predictions was developed. In order to illustrate the potential of coupling RUSLE2 with a process‐based channel erosion model, the resulting set of representative storms was used as an input to the channel routines used in Chemicals, Runoff, and Erosion from Agricultural Management Systems (CREAMS) to calculate ephemeral gully erosion. The method was applied to a hypothetical 5‐ha field cropped to cotton in Marshall County, MS, bisected by a potential ephemeral gully having channel slopes ranging from 0·5 to 5% and with hillslopes on both sides of the channel with 5% steepness and 22·1 m length. Results showed the representative storm sequence produced reasonable results in CREAMS indicating that ephemeral gully erosion may be of the same order of magnitude as sheet and rill erosion. Copyright © 2010 John Wiley & Sons, Ltd.     

Application of linear and nonlinear techniques in river flow forecasting in the Kilombero River basin,Tanzania / Application de techniques linéaires et non-linéaires à la prévision des débits dans le bassin de la Rivière Kilombero,en Tanzanie

Abstract

Modelling of the rainfall–runoff transformation process and routing of river flows in the Kilombero River basin and its five sub-catchments within the Rufiji River basin in Tanzania was undertaken using three system (black-box) models—a simple linear model, a linear perturbation model and a linear varying gain factor model—in their linear transfer function forms. A lumped conceptual model—the soil moisture accounting and routing model—was also applied to the sub-catchments and the basin. The HEC-HMS model, which is a distributed model, was applied only to the entire Kilombero River basin. River discharge, rainfall and potential evaporation data were used as inputs to the appropriate models and it was observed that sometimes the system models performed better than complex hydrological models, especially in large catchments, illustrating the usefulness of using simple black-box models in datascarce situations.     

Regression‐based approach to low flow prediction in the Maryland Piedmont region under joint climate and land use change

We examine the low flow records for six urbanized watersheds in the Maryland Piedmont region and develop regression equations to predict annual minimum low flow events. The effects of both future climate (based on precipitation and temperature projections from two climate models: Hadley and the Canadian Climate Centre (CCC)) and land use change are incorporated to illustrate possible future trends in low flows. A regression modelling approach is pursued to predict the minimum annual 7‐day low flow estimates for the proposed future scenarios. A regional regression model was calibrated with between 10 and 50 years of daily precipitation, daily average temperature, annual imperviousness, and the daily observed flow time‐series across six watersheds. Future simulations based on a 55 km² urbanizing watershed just north of Washington, DC, were performed. When land use and climate change were employed singly, the former predicted no trends in low flows and the latter predicted significant increasing trends under Hadley and no trends under CCC. When employed jointly, however, low flows were predicted to decrease significantly under CCC, whereas Hadley predicted no significant trends in low flows. Antecedent precipitation was the most influential predictor on low flows, followed by urbanization. Copyright © 2006 John Wiley & Sons, Ltd.     

Impact of road‐generated storm runoff on a small catchment response

The impact of road‐generated runoff on the hydrological response of a zero‐order basin was monitored for a sequence of 24 storm events. The study was conducted in a zero‐order basin (C1; 0·5ha) with an unpaved mountain road; an adjacent unroaded zero‐order basin (C2; 0·2 ha) with similar topography and lithology was used to evaluate the hydrological behaviour of the affected zero‐order basin prior to construction of the road. The impact of the road at the zero‐order basin scale was highly dependent on the antecedent soil‐moisture conditions, total storm precipitation, and to some extent rainfall intensity. At the beginning of the monitoring period, during dry antecedent conditions, road runoff contributed 50% of the total runoff and 70% of the peak flow from the affected catchment (C1). The response from the unroaded catchment was almost insignificant during dry antecedent conditions. As soil moisture increased, the road exerted less influence on the total runoff from the roaded catchment. For very wet conditions, the influence of road‐generated runoff on total outflow from the roaded catchment diminished to only 5·4%. Both catchments, roaded and unroaded, produced equivalent amount of outflow during very wet antecedent conditions on a unit area basis. The lag time between the rainfall and runoff peaks observed in the unroaded catchment during the monitoring period ranged from 0 to 4 h depending on the amount of precipitation and antecedent conditions, owing mainly to much slower subsurface flow pathways in the unroaded zero‐order basin. In contrast, the lag time in the roaded zero‐order basin was virtually nil during all storms. Copyright © 2009 John Wiley & Sons, Ltd.