Effects of Mudstone Particle Content on Shear Strength of a Crushed Sandstone–Mudstone Particle Mixture

The present study focuses on the shear strength, deformation, and particle crushing of sand which is mixed by crushed sandstone and mudstone particles. Two triaxial tests—one for unsaturated specimens and the other for saturated specimens—were performed, along with sieve analysis tests. Results obtained from the triaxial tests indicate that, with the increment of the mudstone particle content by weight, the angle of internal friction decreases, the cohesion increases and then decreases, and both the initial angle of shearing resistance at the atmospheric pressure and decremental angle increase and then decrease. Compared to the unsaturated specimens, the deviator stress or normalized deviator stress of the saturated specimens at the same axial stress may decrease due to the wetting action. Thus, the shear strength of the tested materials may be reduced by the wetting action. Results of sieve analysis tests indicate that the mixing of some mudstone particles into the sandstone particle mixture may reduce the amount of particle crushing, but the wetting action may increase the amount. The amount of the crushed particle may arrive at a minimum of 40% of mudstone particle content by weight.     

Laboratory Study for Influence of Clay Content (CC) on Wave-Induced Liquefaction in Marine Sediments

In this artice, the influence of clay content on the wave-induced liquefaction in marine sediments was reported. The one-dimensional (1-D) equipment was setup with a vertical cylinder and 1.8–m–thick clayey sandy deposit and 0.2–m–thick water above the deposit. Unlike the previous experimental study for a single soil layer, this study used sand-kaolin mixtures, sand-illite mixtures, and sand-bentonite mixtures as the experimental samples. A series of experiments with 3,000 wave cycles in each test were conducted under numerous wave and soil conditions, which allowed us to examine the influence of clay content (CC) on wave-induced liquefaction in marine sediments. The experimental results showed that the clayey sandy deposit will become prone to liquefaction with the increase of CC when CC is less than a critical value, which depends on the type of clay. However, when CC is greater than the critical value, liquefaction depth will decrease as CC increases. Furthermore, when the CC value reaches a certain level, liquefaction will not occur. For example, no liquefaction occurs when CC ≥ 33% for both kaolin-sand and illite-sand mixtures and CC ≥ 16.36% for bentonite-sand mixtures.     

Comparative Study of Hydrogen and Carbon Isotopic Composition of Gases Generated from the Pyrolysis of a Peat under Saltwater and Freshwater Conditions

To understand the influence of the diagenetic water medium on the isotopic compositions of thermogenic coalbed gas, both hydrous and anhydrous closed-system pyrolyses were performed at temperatures of 250°C to 650°C on an herbaceous marsh peat. Compared to the results of anhydrous pyrolysis, the hydrocarbon gases generated from hydrous pyrolyses have very different hydrogen isotopic compositions. However, the carbon isotopic compositions of the hydrocarbon gases became only slightly heavier in hydrous pyrolysis, compared to that from anhydrous pyrolysis. With the progress of thermal evolution from peat to a more advanced thermal maturity of vitrinite reflectance values (Ro) of 5.5% during the pyrolysis, the difference in the average δD value increased from 52‰ to 64‰ between the hydrous pyrolysis with saltwater and anhydrous pyrolysis and increased from 18‰ to 29‰ between the hydrous pyrolysis with freshwater and anhydrous pyrolysis, respectively. The difference in the average δ13C value was only 1‰–2‰ between the hydrous and anhydrous pyrolysis. The relationships between the δD values of the generated hydrocarbon gases and Ro values as well as among δD values of the hydrocarbon gas species are established. The close relationships among these parameters suggest that the water medium had a significant effect on the hydrogen isotopic composition and a minimal effect on the carbon isotopic composition of the hydrocarbon gases. The results of these pyrolyses may provide information for the understanding of the genesis of coalbed gas from herbaceous marsh material with the participation of different diagenetic water media.     

Geochemical Constraints on the Origin of Banded Iron Formation‐Hosted Iron Ore from the Archaean Ntem Complex (Congo Craton) in the Meyomessi Area,Southern Cameroon

Banded iron formations (BIFs) are the most significant source of iron in the world. In this study, we report petrographic and geochemical data of the BIF from the Meyomessi area in the Ntem Complex, southern Cameroon, and discuss their genesis and the iron enrichment process. Field investigations and petrography have revealed that the studied BIF samples are hard; compact; weakly weathered; and composed of magnetite, subordinate quartz, and geothite. The geochemical composition of the whole rock reveals that iron and silica represent more than 98 wt% of the average composition, whereas Al₂O₃, TiO₂, and high‐field strength elements (HFSE) contents are very low, similar to detritus‐free marine chemical precipitates. The total iron (TFe) contents range from 48.71 to 65.32 wt % (average of 53.29 wt %) and, together with the low concentrations of deleterious elements (0.19 wt % P on average), are consistent with medium‐grade iron ores by global standards. This interpretation is confirmed by the SiO₂/Fe₂O_3total versus (MgO + CaO + MnO)/Fe₂O_3total discrimination plot in which most of the Meyomessi BIF samples fall in the field of medium‐grade siliceous ore. Only one sample (MGT94) plots in the high‐grade magnetite–geothite ore domain. The high Fe/Ti (376.36), Fe/Al (99.90), and Si/Al (29.26) ratios of the sample are consistent with significant hydrothermal components. The rare earth elements (REE) contents of the studied BIF samples are very low (∑REE: 0.81–1.47 ppm), and the Post‐Archaean Australian Shale (PAAS)‐normalized patterns display weak positive Eu anomalies (Eu/Eu*: 1.15–1.33), suggesting a syngenetic low‐temperature hydrothermal solutions, similar to other BIF worldwide. However, the Meyomessi BIFs show high Fe contents when compared to the other BIFs. This indicates an epigenetic mineralization process affected the Meyomessi BIF. From the above results and based on the field and analytical data, we propose that the genetic model of iron ores at the Meyomessi area involves two stages of the enrichment process, hypogene enrichment of BIF protore by metamorphic and magmatic fluids followed by supergene alteration as indicated by the presence of goethite in the rocks.     

Episodic crustal growth in the Tanzania Craton: evidence from Nd isotope compositions

The analysis of available Nd isotope data from the Tanzania Craton places important constraints on the crust-mantle separation ages, and events marking juvenile crustal addition and crustal recycling. Nd model ages date the oldest crust extraction to 3.16 Ga in the Tanzania Craton, although a rock record of such antiquity is yet to be found there. The most significant period of juvenile crustal addition as well as crustal recycling is 2.7–2.6 Ga. The Nd isotopes of mafic samples show that chemical heterogeneity existed in the mantle beneath the Tanzania Craton, with some samples originating from significantly depleted mantle, and most samples originating from the mixture of primitive mantle and depleted mantle. The Nd isotope section reveals significant differences in Nd isotopes between the north craton and central craton; compared to the north craton, the central craton yields a Nd model age that is approximately 100 Ma older, and its ε_Nd(t) values are more negative, indicating that the two parts of the craton have different mantle source regions. Different types of granitoids are distributed in the Tanzania Craton, such as high-K and low-Al granite, calc-alkaline granite, peraluminous granite and transitional types of tonalite-trondhjemite-granodiorites (TTGs). Most of the granitoids formed later than the mafic rocks in syn-collision and post-collision events.     

蒙脱石伊利石化的水热实验模拟

以蒙脱石为初始材料,通过水热实验模拟在不同温度压力条件下蒙脱石的伊利石化过程。利用X射线粉末衍射及X射线荧光光谱、红外光谱和扫描电镜等方法对样品的矿物物相、化学成分、晶体结构与微观形貌等进行分析,其结果表明:(1)蒙脱石至伊利石的转化受温度和压力条件的控制;(2)随着温度和压力的增高,蒙脱石伊利石化沿着蒙脱石-无序伊蒙混层-有序伊蒙混层-伊利石的转化序列进行转化;(3)水热实验模拟表明蒙脱石至伊利石的转化以溶解重结晶机制为主。实验结果不仅有助于了解埋藏与低级变质作用中的蒙脱石伊利石化过程,同时为研究断层活动所致断层泥中黏土矿物的转化及反演断层形成时温度压力条件提供基本参数。     

土壤入渗对阜新市北部浅层地下水总硬度影响的淋滤实验

本次室内土柱淋滤实验通过改变Na~+、H~+、NH_4~+浓度来模拟现实生活中不同浓度的生活污水、酸雨及农业施肥灌溉对浅层地下水总硬度的影响过程。实验结果表明淋滤液浓度越高,所对应的淋出液的总硬度峰值就越高。相同浓度的Na~+、H~+、NH_4~+进行土柱淋滤实验时,NH_4~+所对应的淋出液总硬度的峰值最大,H~+次之,Na~+最小且NH_4~+所对应的整个实验用时最短,在相同浓度单一离子作用下NH_4~+对浅层地下水硬度的影响更加明显。     

甘肃天水地区强降雨诱发黄土-泥岩滑坡机理实验研究

在甘肃天水地区每年由降雨诱发的黄土-泥岩滑坡灾害事故很多,给当地人民生命财产造成巨大损失。为探索该类斜坡的滑动破坏过程与机理,在野外地质调查、工程地质钻探及岩土体力学测试的基础上,通过室内大型物理模型实验,研究“上部黄土+下部泥岩”二元结构类型斜坡在强降雨作用下的动态变形演化过程,揭示该类斜坡的破坏机理和破坏模式。结果表明:强降雨作用下斜坡变形破坏以滑动破坏为主,水分的作用主要表现为增加土体自重、引起土体强度降低、降低结构面的抗滑力、产生孔隙水压力及降低有效应力等几个方面,斜坡的破坏模式则主要表现为坡肩侵蚀→微裂隙产生、发展、贯通→斜坡局部滑动破坏→斜坡整体滑动破坏。研究结果对天水地区该类滑坡的早期识别有重要的参考意义,可为该类滑坡的防灾减灾提供科学依据。     

四川盆地云和降水观测科学试验设计与实践

2014—2017年四川地区开展了大范围云系观测科学试验。观测对象以盆地层状云系和积层混合云系为主,积状云(对流云)为辅。本文围绕试验目标、区域、观测要素、观测布局设计、观测方案设计、设备技术参数和典型个例等7个方面进行介绍,根据不同类型云系和降水变化特征,设计有针对性的观测方案,获得了不同类型云系和降水的多尺度连续性观测数据,为四川地区开展云和降水关系研究提供详实的综合型外场观测数据。层状降水云典型个例云高可达8km,云强核心部位的云雷达反射率可达28dBz,径向速度可达-6m·s~(-1),在0℃附近,反射率和退偏振因子LDR上有一条明显的亮带,表现为极大值,液态水主要集中于4.5km以下,随着雨强增大,液水含量增加,降水滴谱分布较窄,随着雨强减小,雨滴谱和速度谱变窄,但小粒径数浓度增加,说明对层状云雨强起主导作用的是雨滴直径,而不是数浓度;无降水层状云典型个例云层厚度为3.2km,云顶约为4km,云雷达反射率不超过0dBz,径向速度不超过5m·s~(-1),层状云内整层水汽含量和液水含量较为稳定,云中主要为液态粒子且粒径偏小、小粒径数浓度较高。     

烃源岩地质色层效应的模拟实验

利用未混油或混油源岩样品在低温、加压条件下分别对纹层状泥岩、暗色块状泥岩及灰质块状泥岩样品进行排烃模拟实验,其中块状泥岩及灰质块状泥岩被研碎后混入同层原油,而纹层状泥岩不被研碎(也未混油),以保持其层理结构的完整性。实验结果显示,排烃过程造成轻烃相对富集,色谱图中主峰碳前移,正构烷烃分布及部分甾、萜烷参数值在排烃过程中产生明显变化,萜烷对运移的敏感性没有甾烷强。在排烃过程中纹层状泥岩与块状泥岩及灰质块状泥岩的地质色层效应有着显著的差异,相对而言,块状泥岩与块状灰质泥岩的排烃效率低,但排烃过程造成了它们出现较为明显的地质色层效应,而纹层状泥岩排烃效率高,但在排烃过程中地质色层效应不明显。分析认为源岩的物理结构是造成这种地质色层效应的差异的主要原因之一。