Universal hydrofracturing algorithm for shear-thinning fluids: Particle velocity based simulation

A universal particle velocity based algorithm for simulating hydraulic fractures, previously proposed for Newtonian fluids, is extended to the class of shear-thinning fluids. The scheme is not limited to any particular elasticity operator or crack propagation regime. The computations are based on two dependent variables: the crack opening and the reduced particle velocity. The application of the latter facilitates utilization of the local condition of Stefan type (speed equation) to trace the fracture front. The condition is given in a general explicit form which relates the crack propagation speed (and the crack length) to the solution tip asymptotics. The utilization of a modular structure, and the adaptive character of its basic blocks, result in a flexible numerical scheme. The computational accuracy of the proposed algorithm is validated against a number of analytical benchmark solutions.     

Facies and depositional architecture according to a jet efflux model of a late Paleozoic tidewater grounding-line system from the Itararé Group (Paraná Basin), southern Brazil

During the Late Paleozoic, the Gondwana supercontinent was affected by multiple glacial and deglacial episodes known as “The Late Paleozoic Ice Age” (LPIA). In Brazil, the evidence of this episode is recorded mainly by widespread glacial deposits preserved in the Paraná Basin that contain the most extensive record of glaciation (Itararé Group) in Gondwana. The Pennsylvanian to early Permian glaciogenic deposits of the Itararé Group (Paraná Basin) are widely known and cover an extensive area in southern Brazil. In the Doutor Pedrinho area (Santa Catarina state, southern Brazil), three glacial cycles of glacier advance and retreat were described. The focus of this article is to detail the base of the second glacial episodes or Sequence II. The entire sequence records a deglacial system tract that is represented by a proximal glacial grounding-line system covered by marine mudstones and shales associated with a rapid flooding of the proglacial area. This study deals with the ice proximal grounding-line systems herein interpreted according to lab model named plane-wall jet with jump. Detailed facies analysis allowed the identification of several facies ranging from boulder-rich conglomerates to fine-grained sandstones. No fine-grained deposits such as siltstone or shale were recorded. According to this model, the deposits are a product of a supercritical plane-wall outflow jet that changes to a subcritical jet downflow from a hydraulic jump. The hydraulic jump forms an important energy boundary that is indicated by an abrupt change in grain size and cut-and-fill structures that occur at the middle-fan. The sedimentary facies and facies associations show a downflow trend that can be subdivided into three distinct stages of flow development: (1) a zone of flow establishment (ZFE), (2) a zone of transition (ZFT), and (3) an established zone (ZEF). The proximal discharge is characterized by hyperconcentrated-to-concentrated flow due to the high energy and sediment-laden nature of the flows. At the transitional zone, a hydraulic jump produces a rapid shift of conglomeratic to sandy facies with associated scour features. Towards the distal zones, the jet detaches to originate a vertical turbulent jet characterized by more diluted flows. Discussion of fan facies and architecture within a framework of jet-efflux dynamics provides an improved understanding of grounding-line fans systems that produce coarse-grained strata commonly enclosed by fine-grained rocks. The results have clear implication in terms of prediction of facies tract and geometry of oil and gas reservoirs deposited under similar conditions. And also can be useful to identifying the position of a glacial terminus through time.     

Sensitivity assessment of strontium isotope as indicator of polluted groundwater for hydraulic fracturing flowback fluids produced in the Dameigou Shale of Qaidam Basin

Hydrogeochemical processes that would occur in polluted groundwater and aquifer system, may reduce the sensitivity of Sr isotope being the indicator of hydraulic fracturing flowback fluids(HFFF) in groundwater. In this paper, the Dameigou shale gas field in the northern Qaidam Basin was taken as the study area, where the hydrogeochemical processes affecting Sr isotope was analysed. Then, the model for Sr isotope in HFFF-polluted groundwater was constructed to assess the sensitivity of Sr isotope as HFFF indicator. The results show that the dissolution can release little Sr to polluted groundwater and cannot affect the εSr(the deviation of the 87 Sr/86 Sr ratio) of polluted groundwater. In the meantime, cation exchange can considerably affect Sr composition in the polluted groundwater. The Sr with low εSr is constantly released to groundwater from the solid phase of aquifer media by cation exchange with pollution of Quaternary groundwater by the HFFF and it accounts for 4.6% and 11.0% of Sr in polluted groundwater when the HFFF flux reaches 10% and 30% of the polluted groundwater, respectively. However, the Sr from cation exchange has limited impact on Sr isotope in polluted groundwater. Addition of Sr from cation exchange would only cause a 0.2% and 1.2% decrease in εSr of the polluted groundwater when the HFFF flux reaches 10% and 30% of the polluted groundwater, respectively. These results demonstrate that hydrogeochemical processes have little effect on the sensitivity of Sr isotope being the HFFF indicator in groundwater of the study area. For the scenario of groundwater pollution by HFFF, when the HFFF accounts for 5%(in volume percentage) of the polluted groundwater, the HFFF can result in detectable shifts of εSr(ΔεSr=0.86) in natural groundwater. Therefore, after consideration of hydrogeochemical processes occurred in aquifer with input of the HFFF, Sr isotope is still a sensitive indicator of the Quaternary groundwater pollution by the HFFF produced in the Dameigou shale of Qaidam Basin.     

Prediction criteria for groundwater potential zones in Kemuning District,Indonesia using the integration of geoelectrical and physical parameters

The presence of groundwater is strongly related to its geological and geohydrological conditions.It is,however,important to study the groundwater potential in an area before it is utilized to provide clean water.Werner-Schlumberger’s method was used to analyze the groundwater potential while hydraulic properties such as soil porosity and hydraulic conductivity were used to determine the quality and ability of the soil to allow water’s movement in the aquifer.The results show that the aquifer in the Sekara and Kemuning Muda is at a depth of more than 6 meters below the ground level with moderate groundwater potential.It is also found that the aquifer at depths of over 60 m have high groundwater potential.Moreover,soil porosity in Kemuning is found to be average while the ability to conduct water was moderate.This makes it possible for some surface water to seep into the soil while the remaining flows to the rivers and ditches.     

2D Wave setup behind submerged breakwaters

In addition to reducing the incoming wave energy, submerged breakwaters also cause a setup of the sea level in the protected area, which is relevant to the whole shadow zone circulation, including alongshore currents and seaward flows through the gaps. This study examines such a leading hydraulic parameter under the simplified hypothesis of 2D motion and presents a prediction model that has been validated by a wide ensemble of experimental data. Starting from an approach originally proposed by Dalrymple and Dean [(1971). Piling-up behind low and submerged permeable breakwaters. Discussion note on Diskin et al. (1970). Journal of Waterways and Harbors Division WW2, 423–427], the model splits the rise of the mean water level into two contributions: one is due to the momentum flux release forced by wave breaking on the structure, and the other is associated with the mass transport process. For the first time, the case of random wave trains has been explicitly considered.     

Experimental investigation of tsunami bore impact pressure on a perforated seawall

Catastrophic failures of many tsunami barriers along the affected coasts during the 2011 Tohoku earthquake tsunami has prompted extensive investigation into improving and revising design codes for tsunami defence structures. To date, researchers and coastal engineers are investigating to understand the failure mechanisms and to find solutions so that the structures merely remain intact in the extreme event such as tsunami. Thus, the present work is motivated to experimentally study tsunami-induced bore pressures exerted on vertical seawalls; a solid vertical wall and a porous vertical seawall that consisted of a perforated front wall and a solid rear wall. Bores with various heights and velocities were generated by using the dam-break method. A porous seawall with 20% porosity of perforated front wall was used in this study. Bore pressures exerted on the solid rear wall and chamber oscillations that occurred in the experiments were also discussed. The experimental results showed that multiple peak pressures were observed during bore run-up phase in the time series of bore impacts. A predictive equation to estimate the maximum bore pressure on a perforated seawall was developed using multiple regression analysis. The proposed equation was also compared with previous empirical formulas.     

Migration and speciation transformation mechanisms of mercury in undercurrent zones of the Tongguan gold mining area,Shaanxi Loess Plateau and impact on the environment

In order to study the migration and transformation mechanism of Hg content and occurrence form in subsurface flow zone of gold mining area in Loess Plateau and its influence on water environment, the field in-situ infiltration test and laboratory test were carried out in three typical sections of river-side loess, alluvial and proluvial strata in Tongguan gold mining area of Shaanxi Province, and the following results were obtained: (1) The source of Hg in subsurface flow zone is mainly caused by mineral processing activities; (2) the subsurface flow zone in the study area is in alkaline environment, and the residual state, iron and manganese oxidation state, strong organic state and humic acid state of mercury in loess are equally divided in dry and oxidizing environment; mercury in river alluvial or diluvial strata is mainly concentrated in silt, tailings and clayey silt soil layer, and mercury has certain stability, and the form of mercury in loess is easier to transform than the other two media; (3) under the flooding condition, most of mercury is trapped in the silt layer in the undercurrent zone where the sand and silt layers alternate with each other and the river water and groundwater are disjointed, and the migration capacity of mercury is far less than that of loess layer and alluvial layer with close hydraulic connection; (4) infiltration at the flood level accelerates the migration of pollutants to the ground; (5) the soil in the undercurrent zone is overloaded and has seriously exceeded the standard. Although the groundwater monitoring results are safe this time, relevant enterprises or departments should continue to pay attention to improving the gold extraction process, especially vigorously rectify the small workshops for illegal gold extraction and the substandard discharge of the three wastes, and intensify efforts to solve the geological environmental problems of mines left over from history. At present, the occurrence form of mercury in the undercurrent zone is relatively stable, but the water and soil layers have been polluted. The risk of disjointed groundwater pollution can not be ignored while giving priority to the treatment of loess and river alluvial landform areas with close hydraulic links. The research results will provide a scientific basis for water conservancy departments to groundwater prevention and control in water-deficient areas of the Loess Plateau.     

海水液压驱动的水下作业工具系统

论文介绍了海水液压作业工具系统的工作原理、关键技术问题及样机和试验结果。该系统同电动、气动或油压工具相比,具有诸多独特的优势,在海洋开发、船舶工程等领域均有广阔的应用前景。