Groundwater-flow modeling in the Yucatan karstic aquifer, Mexico

The current conceptual model of the unconfined karstic aquifer in the Yucatan Peninsula, Mexico, is that a fresh-water lens floats above denser saline water that penetrates more than 40 km inland. The transmissivity of the aquifer is very high so the hydraulic gradient is very low, ranging from 7–10 mm/km through most of the northern part of the peninsula. The computer modeling program AQUIFER was used to investigate the regional groundwater flow in the aquifer. The karstified zone was modeled using the assumption that it acts hydraulically similar to a granular, porous medium. As part of the calibration, the following hypotheses were tested: (1) karstic features play an important role in the groundwater-flow system; (2) a ring or belt of sinkholes in the area is a manifestation of a zone of high transmissivity that facilitates the channeling of groundwater toward the Gulf of Mexico; and (3) the geologic features in the southern part of Yucatan influence the groundwater-flow system. The model shows that the Sierrita de Ticul fault, in the southwestern part of the study area, acts as a flow barrier and head values decline toward the northeast. The modeling also shows that the regional flow-system dynamics have not been altered despite the large number of pumping wells because the volume of water pumped is small compared with the volume of recharge, and the well-developed karst system of the region has a very high hydraulic conductivity. Electronic Publication     

Fluid permeability of sedimentary rocks in a complete stress–strain process

The permeability of sedimentary rocks during triaxial compression tests was investigated to relate it to the complete strain–stress process. It was found that the permeability was not constant, but varied with the stress and strain states in the rocks. Prior to the peak strength, the permeability decreases with increasing load. A dramatic increase in permeability occurs during the strain softening period. In the present study, in situ measurements of fluid flow and pressure in floor strata was carried out in a double longwall mining face in the Yangzhuang colliery. These measurements show that both the strata pressure and the position with respect to the mining face influence the hydrogeologic properties. The permeability increased in the floor strata behind the mining face because those mining induced fractures opened as the strata pressure decreased. To better understand this change in hydraulic behavior around the mining faces, 3-D numerical modeling was carried out. The model provides the general picture of the stress distribution and failure zone both in the floor and roof strata. The field and model results demonstrate the importance of changes in the stress and strain states on the hydrogeology of a site.     

A method to estimate hydraulic conductivity while drilling

A field test and analysis method has been developed to estimate the vertical distribution of hydraulic conductivity in shallow unconsolidated aquifers. The field method uses fluid injection ports and pressure transducers in a hollow auger that measure the hydraulic head outside the auger at several distances from the injection point. A constant injection rate is maintained for a duration time sufficient for the system to become steady state. Exploiting the analogy between electrical resistivity in geophysics and hydraulic flow two methods are used to estimate conductivity with depth: a half-space model based on spherical flow from a point injection at each measurement site, and a one-dimensional inversion of an entire dataset.

The injection methodology, conducted in three separate drilling operations, was investigated for repeatability, reproducibility, linearity, and for different injection sources. Repeatability tests, conducted at 10 levels, demonstrated standard deviations of generally less than 10%. Reproducibility tests conducted in three, closely spaced drilling operations generally showed a standard deviation of less than 20%, which is probably due to lateral variations in hydraulic conductivity. Linearity tests, made to determine dependency on flow rates, showed no indication of a flow rate bias. In order to obtain estimates of the hydraulic conductivity by an independent means, a series of measurements were made by injecting water through screens installed at two separate depths in a monitoring pipe near the measurement site. These estimates differed from the corresponding estimates obtained by injection in the hollow auger by a factor of less than 3.5, which can be attributed to variations in geology and the inaccurate estimates of the distance between the measurement and the injection sites at depth.     

抽放瓦斯定向钻孔施工技术的研究

介绍了抽放瓦斯定向钻孔施工技术的主要设备、钻具及仪器，组合钻具及钻进工艺参数，并通过几个工程实例，说明了该项技术的应用效果。     

液压油污染控制

工程机械液压系统故障大约有70T是由液压油污染引起的，本文阐述了水电施工机械设备液压油的污染对液压系统的影响及如何控制液压油污染，保证其清洁度，从而预防液压系统故障。     

红层软岩隧洞围岩变形破坏机制研究

红层软岩的物质组成、化学成分、物理力学性质等方面在国内外已有较系统的研究,但对软岩隧道围岩的变形破坏机理及其治理一直是工程技术人员关心问题。通过对回龙宫隧洞的地质环境分析及有限元数值计算,阐明了红层隧洞围岩的膨胀变形破坏机理,最后提出了在此类围岩中修建水工隧洞的过程中,防止围岩变形破坏的建议。     

岩石水压致裂和诱发地震的实验研究

用7种岩石各制备了几类不同预裂纹的系列试件，并在不同围压下进行水压致裂强度实验。结合典型的水库诱发地震的实际资料和现今构造应力场的实验结果，以及应用岩石强度理论和岩石断裂力学的一些原理、方法，进行岩石孔隙水压诱发地震的探讨。初步结果为：(1)若岩体内构造应力很小，一定大小的孔隙水压力σp，可直接使岩体内的薄弱面致裂并发生小地震。(2)若构造应力较大，存在两类诱发地震的可能：①对岩体浅部一些走向与构造应力的主压应力σ1方向相近的薄弱面，σp可促使其发生张性破裂并诱发小地震。②当构造应力接近于断裂的抗剪强度时，因σp，降低了断裂面上的正应力σn，使原处于稳定状态的断裂失稳，发生滑移破裂并诱发出地震。σp导致断裂的破裂深度增大，使诱发地震的震级大于原潜在的地震震级。(3)各种岩体均存在着一个极限深度，此深度后不再有诱发地震。     

Statistical and geostatistical features of streambed hydraulic conductivities in the Platte River, Nebraska

This paper presents streambed hydraulic conductivities of the Platte River from south-central to eastern Nebraska. The hydraulic conductivities were determined from river channels using permeameter tests. The vertical hydraulic conductivities (K _v ) from seven test sites along this river in south-central Nebraska belong to one statistical population. Its mean value is 40.2 m/d. However, the vertical hydraulic conductivities along four transects of the Ashland test site in eastern Nebraska have lower mean values, are statistically different from the K _v values in south-central Nebraska, and belong to two different populations with mean values of 20.7 and 9.1 m/d, respectively. Finer sediments carried from the Loup River and Elkhorn River watersheds to the eastern reach of the Platte River lowers the vertical hydraulic conductivity of the streambed. Correlation coefficients between water depth and K _v values along a test transect indicates a positive correlation – a larger K _v usually occurs in the part of channel with deeper water. Experimental variograms derived from the vertical hydraulic conductivities for several transects across the channels of the Platte River show periodicity of spatial correlation, which likely result from periodic variation of water depth across the channels. The sandy to gravelly streambed contains very local silt and clay layers; spatially continuous low-permeability streambed was not observed in the river channels. The horizontal hydraulic conductivities were larger than the vertical hydraulic conductivities for the same test locations.