Analysis of Anomalous Characteristics of Regional Crustal Deformation before the September 16th, 2019 Zhangye MS5.0 Earthquake, Gansu, China

To study the crustal movement in the vicinity of the epicenter before the Zhangye M_S5.0 earthquake in 2019, the characteristics of crustal deformation before the earthquake are discussed through the GPS velocity field analysis based on the CMONOC data observed from GPS. The baseline time series between two continuous GPS stations and the strain time series of an area among several stations are analyzed in the epicenter area. The resulting time series of baseline azimuth around the epicenter reflects that the energy of the fault in the northern margin of Qilian Mountain is accumulated continuously before 2017. Besides, the movement trend of azimuth slows down after 2017, indicating the stress accumulation on both sides of the seismogenic fault zone has reached a certain degree. The first shear strain and EW-direction linear strain in the epicentral area of the Zhangye M_S5.0 earthquake remain steady after 2017, and the surface strain rate decreases gradually after 2016. It is illustrated that there is an obvious deformation loss at the epicentral region three years before the earthquake, indicating that a certain degree of strain energy is accumulated in this area before the earthquake.     

Coherence algorithm with a high-resolution time–time transform and feature matrix for seismic data

Traditional coherence algorithms are often based on the assumption that seismic traces are stationary and Gaussian. However, seismic traces are actually non-stationary and non-Gaussian. A constant time window and the canonical correlation analysis in traditional coherence algorithms are not optimal for non-stationary seismic traces and cannot describe the similarity between adjacent seismic traces in detail. To overcome this problem, a new coherence algorithm using the high-resolution time–time transform and the feature matrix is designed. The high-resolution time–time transform used to replace the constant time window can produce a frequency-dependent time local series to analyse non-stationary seismic traces. The feature matrix, constructed by the frequency-dependent time local series and the related local gradients, defines a new correlation metric that enhances more details of the geological discontinuities in seismic images than does the canonical correlation analysis. Additionally, the Riemannian metric is introduced for related calculations because the feature matrices are not defined in a Euclidean space but rather in a manifold space. Application to field data illustrates that the proposed method reveals more details of structural and stratigraphic features.     

Application of a cascading filter implemented using morphological filtering and time–frequency peak filtering for seismic signal enhancement

Inspired by the idea of the iterative time–frequency peak filtering, which applies time–frequency peak filtering several times to improve the ability of random noise reduction, this article proposes a new cascading filter implemented using mathematic morphological filtering and the time–frequency peak filtering, which we call here morphological time–frequency peak filtering for convenience. This new method will be used mainly for seismic signal enhancement and random noise reduction in which the advantages of the morphological algorithm in processing nonlinear signals and the time–frequency peak filtering in processing nonstationary signals are utilized. Structurally, the scheme of the proposed method adopts mathematic morphological operation to first preprocess the signal and then applies the time–frequency peak filtering method to ultimately extract the valid signal. Through experiments on synthetic seismic signals and field seismic data, this paper demonstrates that the morphological time–frequency peak filtering method is superior to the time–frequency peak filtering method and its iterative form in terms of valid signal enhancement and random noise reduction.     

Using visibility analysis to improve point density and processing time of SfM-MVS techniques for 3D reconstruction of landforms

Image network geometry, including the number and orientation of images, impacts the error, coverage, and processing time of 3D terrain mapping performed using structure-from-motion and multiview-stereo (SfM-MVS). Few studies have quantified trade-offs in error and processing time or ways to optimize image acquisition in diverse topographic conditions. Here, we determine suitable camera locations for image acquisition by minimizing the occlusion produced by topography. Viewshed analysis is used to select the suitable images, which requires a preliminary digital elevation model (DEM), potential camera locations, and sensor parameters. One aerial and two ground-based image collections were used to analyse differences between SfM-MVS models produced using: (1) all available images (ALL); (2) images selected using conventional methods (CON); and (3) images selected using the viewshed analysis (VIEW). The resulting models were compared with benchmark point clouds acquired by a terrestrial laser scanner (TLS) and TLS-derived DEMs. The VIEW datasets produced denser point clouds (28–32% more points) and DEMs with up to 66% reduction in error compared with CON datasets due to reduction of gaps in the DEM. VIEW datasets reduced processing time by 37–76% compared with ALL, with no reduction in coverage or increase in error. DEMs produced with ALL and VIEW datasets had similar slope and roughness, while slight differences that may be locally important were observed for the CON dataset. The new method helps optimize SfM-MVS image collection strategies that significantly reduce the number of images required with minimal loss in coverage or accuracy over complex surfaces. © 2020 John Wiley & Sons, Ltd.     

Efficient strong motion duration of pulse-like records for nonlinear structural analyses

The special interest produced by near-field directivity records and their effect on structural response has given a new significance in the velocity time history, its pulse-like content, and relevant parameters and indices. Recent research has shown that directivity pulses inherent in these records govern the linear and the nonlinear response of a wide range of structures. Based on this observation, it is suggested in this paper that a truncated ground motion, limited to the duration of the predominant velocity pulse, can be efficiently used to predict the structural response, instead of the base motion with the total duration, reducing significantly the required runtimes. The proposed methodology is verified for a series of medium to high rise reinforced concrete buildings, for which nonlinear time-history analyses are performed for a vast suite of pulse-like near-field records applied as base excitations with their total duration and the proposed truncated one. Comparison of the results for the response displacements and forces shows very good agreement, permitting the acceptance of the pulse duration as the efficient strong motion time interval of the original record, which determines the response and, thus, it can be used for nonlinear structural analyses.     

建筑抗震实时混合试验时滞补偿方法研究综述

时滞补偿是建筑抗震实时混合试验的重要问题。文章对时滞补偿方法的研究进行总结,将时滞补偿方法分为基于时间的位移预测时滞补偿方法、基于反馈力的位移预测时滞补偿方法、基于加载系统模型求逆的时滞补偿方法、基于控制理论的时滞补偿方法和基于集成理念的综合补偿方法。     

考虑尺寸效应的近海桥梁天然橡胶隔震支座力学性能老化时变规律研究

目前天然橡胶支座（NRB）的性能研究大多未考虑尺寸效应,在前期开展的近海桥梁隔震支座和材料老化时变规律研究的基础上,同时考虑支座直径尺寸变化和老化作用时间的影响对NRB的性能进行研究。首先采用ABAQUS有限元软件对不同直径尺寸NRB的性能进行分析,得到了NRB性能随直径尺寸的变化规律;然后结合前期老化作用对NRB及其橡胶材料性能时变规律的影响研究成果,分析了直径尺寸及老化作用时间共同作用下,NRB性能的变化规律,并通过ABAQUS有限元分析,验证了该变化规律的准确性。结果表明:NRB的水平刚度和竖向刚度均随其直径尺寸的增大呈正比例增大趋势;NRB水平刚度比和竖向刚度比均随老化作用时间的增长呈线性增大趋势;且直径为150mm的NRB在实际环境老化60a后,其水平刚度和竖向刚度的增长幅度分别为:30.8%和16.41%,由此可见老化作用时间对NRB水平刚度的影响较显著,对其竖向刚度的影响较小。研究内容可为隔震桥梁结构中支座缩尺模型试验的相关设计提供参考,并为将实验室缩尺橡胶隔震支座的相关成果较好地应用于实际工程计算及设计中提供依据。     

一种实时场地校正方法及其在地震预警中的应用

地震预警系统对地震数据处理的实时性要求极高。其系统数据来源除布设在基岩的测震台站外,还有大量非基岩场地的强震动台站和地震烈度仪台站,其场地影响不容忽视。为了考虑震级估算和地震动场预测中的场地影响,需实时对各种场地条件下的地震波形进行校正。目前处理一般使用某个标量来表征场地放大效应。本文采用一种实时的场地校正方法,首先计算目标场地与参考场地的谱比,然后通过最小二乘法、双线性变换将谱比转化为因果递归的无限冲激响应(IIR)时域滤波器,之后可以应用该滤波器进行实时场地校正。该方法考虑了场地放大系数的频率依赖性,相比于标量校正提高了准确度。应用我国四川和日本部分强震动台站记录,验证并讨论了这种实时场地校正方法在地震预警中的应用效果。     

基于弹性拉索的超高墩三塔斜拉桥减震效果研究

为探究超高墩三塔斜拉桥在弹性拉索装置下的减震效果,首先利用SAP2000建立了考虑支座非线性和拉索几何非线性的三维有限元模型;其次基于弹性拉索装置,研究了弹性拉索刚度对三塔斜拉桥地震响应的影响;最后基于数值分析结果并结合某三塔斜拉桥实际工程提出3种减震方案。研究表明:在两边塔塔梁结合处设置弹性拉索可显著减小桥梁在地震作用下的内力和位移响应;提出的方案1(两边塔单根弹性索均为50股,单股刚度均为12000kN/m)、方案2(两边塔单根弹性索均为100股,单股刚度均为10000kN/m)和方案3(15#主塔单根弹性拉索100股,单股刚度10000kN/m;17#主塔单根弹性拉索100股,单股刚度为16000kN/m)相较于无弹性索状态,均可有效降低主塔塔底弯矩、塔底剪力、塔顶位移及主梁纵向位移;相较于方案1,方案2和方案3是更优方案。     

湖泊蒸发观测与计算方法研究进展

湖泊蒸发是连接湖泊水分循环与能量平衡的关键纽带之一,认识湖泊蒸发过程对于理解湖-气间相互作用机制十分重要。然而,由于湖泊的形态结构、地理位置和气候背景不同,各湖泊在不同时间尺度上的蒸发特征不同。湖泊蒸发存在复杂的物理驱动过程、时间尺度相关的反馈以及空间异质性。准确地捕捉并量化湖泊蒸发过程,仍是湖沼学、水文学和气象学等学科的重要研究内容。本文首先介绍了湖泊蒸发的主要观测手段,然后概述了湖泊蒸发在日内、季节、年际、年代际四种不同时间尺度的变化特征;梳理了不同时间尺度各要素对湖泊蒸发的影响,以及湖泊蒸发与湖泊面积和深度等形态结构特性及纬度和海拔等地理因素之间的关系;对自涡度相关技术等高精度仪器应用以来的湖泊蒸发研究进展做出了总结。