压力分散型锚索性能研究

文章在考察研究了国内应用压力分散型锚索治理不稳定边坡的工程实例的基础上,参考其它有关该方面的研究成果,分析了压力分散型锚索的作用机理、结构构造、破坏模式、承载力影响因素、耐久性能等,总结了压力分散型锚索的工程应用优势与不足,为引入该类锚索结构在湖南省滑坡及崩塌地质灾害治理工程中推广应用作了技术准备。     

基坑支护结构施工技术要点与工程实例分析(下)

４地下连续墙施工技术方法４．１要点（１）导墙的修筑精度（宽度、平直度、垂直度和标高等）和强度对成槽施工质量有直接影响,高质量的导墙是高质量槽段的基础,常用的导墙形式如图２所示。图２导墙断面形式示意图（ａ）板型;（ｂ）Ｌ型;（ｃ）倒Ｌ型;（ｄ）槽型导墙...     

深基坑锚杆护坡桩支护结构稳定性评价

锚杆护坡桩是深基坑工程常用的一种支护结构。文中对设计中所涉及到的结构稳定性评价问题进行了探讨,利用Ｋｒａｎｚ理论一些假设和条分法原理,提出了深基坑锚杆抗护坡桩稳定性评价的方法。该方法克服了Ｋｒａｎｚ理论中的一些不足,简化了条分法的计算并通过支护工程验证,具有一定的实用价值。     

输电线路抢修塔拉线基础的优化设计

通过分析以往地锚结构设计方法的不足,研究输电线路抢修塔拉线基础的优化设计方法。运用现行杆塔基础设计理论建立数学优化模型,应用MATLAB优化工具箱,编制地锚结构优化程序,设计出输电线路抢修塔最安全,经济,合理的基础型式。此优化方法可以在目前输电线路拉线基础中推广使用,并发挥其显著的经济效应和社会效益。     

双翼弧平式长螺旋锚杆成孔钻具工艺技术研究

通过对以往黏性土层锚杆钻具成孔出现的问题分析,查明了常规取芯钻具与短螺旋钻具在水平方向小角度成孔过程中,土体失去了原始均衡应力造成钻孔缩径,使扰土不能及时输出孔外,是产生堵孔塌孔的直接原因.为此研制了长螺旋锚杆成孔钻具,解决了成孔时扰土输出问题,创新的旋板解决了钻孔内壁土颗粒结构松弛问题,并且彻底解决了在黏性土层中锚杆成孔塌堵现象,保证锚杆成孔设计角度,形成一套较为标准的长螺旋锚杆钻具成孔操作规则.     

Uplift of symmetrical anchor plates by using grid-fixed reinforced reinforcement in cohesionless soil

Uplift response of symmetrical anchor plates with and without grid fixed reinforced （GFR） reinforcement was evaluated in model tests and numerical simulations by Plaxis. Many variations of reinforcement layers were used to reinforce the sandy soil over symmetrical anchor plates. In the current research, different factors such as relative density of sand, embedment ratios, and various GFR parameters including size, number of layers, and the proximity of the layer to the symmetrical anchor plate were investigated in a scale model. The failure mechanism and the associated rupture surface were observed and evaluated. GFR, a tied up system made of fiber reinforcement polymer （FRP） strips and end balls, was connected to the geosynthetic material and anchored into the soil. Test results showed that using GFR reinforcement significantly improved the uplift capacity of anchor plates. It was found that the inclusion of one layer of GFR, which rested directly on the top of the anchor plate, was more effective in enhancing the anchor capacity itself than other methods. It was found that by including GFR the uplift response was improved by 29%. Multi layers of GFR proved more effective in enhancing the uplift capacity than a single GFR reinforcement. This is due to the additional anchorage provided by the GFR at each level of reinforcement. In general, the results show that the uplift capacity of symmetrical anchor plates in loose and dense sand can be significantly increased by the inclusion of GFR. It was also observed that the inclusion of GFR reduced the requirement for a large L/D ratio to achieve the required uplift capacity. The laboratory and numerical analysis results are found to be in agreement in terms of breakout factor and failure mechanism pattern.     

格构锚固技术及其在边坡防治中的应用

格构锚固是将护坡与支挡有机地结合在一起抗滑的一种新型支挡加固措施,它适合于疏松介质边坡的整治。其特点是施工时不需要大型机械,不必开挖扰动边坡,施工安全快速,与植被恢复相结合还可美化环境。以宕昌县民福村边坡为例,说明格构锚固在边坡防治应用中具有较好的效果。     

饱和粉细砂层锚索预应力变化规律监测分析

锚索的预应力损失在工程建设中不可忽视,工程的场地环境条件成为影响锚索预应力损失的主因。饱和粉细砂层较其他地质条件更为复杂敏感,更易引起锚索预应力值的损失。通过对廊坊市某深基坑工程锚索预应力值的实时监测,结合工程环境,分析饱和粉细砂层中造成锚索预应力值变化的原因。结果表明,施工过程、张拉过程以及环境因素都影响锚索预应力的变化,其中开挖过程的影响最明显,预应力值的变化率最大值达79.1%;瞬时卸载造成预应力值22.8%⁵9.2%的损失。对饱和粉细砂层中锚索预应力变化规律的研究分析结论可为类似地质环境的工程建设提供经验。     

玻璃纤维增强聚合物抗浮锚杆抗拔性能试验研究与机制分析

抗浮锚杆作为一种竖向锚固技术在我国许多地区广泛应用,锚杆作为抗浮结构的核心其性能受到极大关注。但因钢材易腐蚀,传统金属锚杆的耐久性受到质疑,特别是地铁等地下工程存在杂散电流,限制了金属抗浮锚杆的应用。玻璃纤维增强聚合物(GFRP)抗浮锚杆是一种由树脂基体和玻璃纤维复合而成的新材料,与金属锚杆相比,它具有耐腐蚀、抗拉强度高、自重轻等优良特性。通过植入式裸光纤传感测试技术对GFRP抗浮锚杆的界面应力分布、荷载传递规律及破坏机制进行了研究,论证了GFRP抗浮锚杆使用的适宜性。试验表明,GFRP抗浮锚杆破坏以杆体基体材料剪切破坏为主,?28 mm锚杆极限抗拔力为250 kN,能够满足工程需要;杆体轴力沿深度方向逐渐递减,并且超过一定长度后杆体不再受力。结果显示,中风化岩地区,当锚固段长度为3.95⁶.95 m时,轴力影响深度范围约为3.7 m,说明GFRP抗浮锚杆同样存在临界锚固深度问题。锚杆界面剪应力呈不均匀分布,剪应力峰值随荷载的增加逐渐向下转移,同时0值点也向杆体深部转移。研究成果可为GFRP抗浮锚杆应用于工程实际提供依据。