冻土机械切削破碎机理的研究进展

冻土开挖困难、破碎效率低是高寒地区工程建设、地基施工等面临的技术难题。冻土机械切削破碎是冻土开挖的主要方法,其机理研究是提高冻土破碎效率的前提和基础。首先总结了温度、含水率、围压等对冻土复杂力学特性的影响,进而调研分析了冻土机械切削破碎的典型切削力学模型,发现冻土切削机械破碎模式不仅与冻土力学特性密切相关,也与切削参数和刀具结构直接相关,冻土切削过程中存在着最优的切削前角（30°~60°）,且深切削和浅切削时冻土内部受力方式存在差异也会导致破坏形式的不同;温度、含水率、围压所造成的冻土力学性能变化会直接导致冻土破坏过程和切削破碎机理的改变,冻土强度随着温度降低表现出先升高然后保持稳定的特性,随着含水率升高呈现出先升高后降低的趋势,冻土破碎存在脆性、塑脆过渡及塑性等不同破坏形式。通过系统总结冻土切削破碎机理研究进展,进一步明确了冻土力学性质主要影响因素、变化特点及其切削破坏损伤特征,为冻土机械切削破碎的切削参数和切削具结构优化提供了设计依据。     

Quantitative characterization of different coal rank reservoirs permeability based on NMR and X-CT technology

With the increasing development of coalbed methane (CBM) field, the quantitative characterization and evaluation of coal reservoir physical properties is becoming more and more important to CBM scale development. In order to solve the limitations of conventional methods for testing coal reservoir physical properties, the authors used the high-tech technologies such as nuclear magnetic resonance technology and CT scanning technology to effectively solve the problems of in-situ and integrity of rock samples and acquire the porosity and permeability. Nuclear magnetic resonance and CT scanning experiments of coal samples were carried out to rapidly obtain the pore type, pore size distribution and connectivity, effective porosity, spatial distribution of pore fissures and other refined coal reservoir physical parameters, based on the samples of middle and low rank coal in Shenfu block and high rank coal in Shizhuangnan block. So a set of quantitative characterization analysis technology that can be applied to coal reservoirs with different coal rank was formed.     

Geology and mineralization of the Sanshandao supergiant gold deposit (1200 t) in the Jiaodong Peninsula,China: A review

The Jiaodong Peninsula in Shandong Province, China is the world’s third-largest gold metallogenic area, with cumulative proven gold resources exceeding 5000 t. Over the past few years, breakthroughs have been made in deep prospecting at a depth of 500–2000 m, particularly in the Sanshandao area where a huge deep gold orebody was identified. Based on previous studies and the latest prospecting progress achieved by the project team of this study, the following results are summarized. (1) 3D geological modeling results based on deep drilling core data reveal that the Sanshandao gold orefield, which was previously considered to consist of several independent deposits, is a supergiant deposit with gold resources of more than 1200 t (including 470 t under the sea area). The length of the major orebody is nearly 8 km, with a greatest depth of 2312 m below sea level and a maximum length of more than 3 km along their dip direction. (2) Thick gold orebodies in the Sanshandao gold deposit mainly occur in the specific sections of the ore-controlling fault where the fault plane changes from steeply to gently inclined, forming a stepped metallogenic model from shallow to deep level. The reason for this strong structural control on mineralization forms is that when ore-forming fluids migrated along faults, the pressure of fluids greatly fluctuated in fault sections where the fault dip angle changed. Since the solubility of gold in the ore-forming fluid is sensitive to fluid pressure, these sections along the fault plane serve as the target areas for deep prospecting. (3) Thermal uplifting-extensional structures provide thermodynamic conditions, migration pathways, and deposition spaces for gold mineralization. Meanwhile, the changes in mantle properties induced the transformation of the geochemical properties of the lower crust and magmatic rocks. This further led to the reactivation of ore-forming elements, which provided rich materials for gold mineralization. (4) It can be concluded from previous research results that the gold mineralization in the Jiaodong gold deposits occurred at about 120 Ma, which was superimposed by nonferrous metals mineralization at 118–111 Ma. The fluids were dominated by primary mantle water or magmatic water. Metamorphic water occurred in the early stage of the gold mineralization, while the fluid composition was dominated by meteoric water in the late stage. The S, Pb, and Sr isotopic compositions of the ores are similar to those of ore-hosting rocks, indicating that the ore-forming materials mainly derive from crustal materials, with the minor addition of mantle-derived materials. The gold deposits in the Jiaodong Peninsula were formed in an extensional tectonic environment during the transformation of the physical and chemical properties of the lithospheric mantle, which is different from typical orogenic gold deposits. Thus, it is proposed that they are named “Jiaodong-type” gold deposits.©2021 China Geology Editorial Office.     

ON THE CHARACTERISTICS OF NON-LINEAR SOIL RESPONSE AND DYNAMIC SOIL PROPERTIES USING VERTICAL ARRAY DATA IN JAPAN

Non-linear response of the soil is investigated by comparing the spectral ratios (uphole/downhole) using weak and strong motions. Data from seven vertical arrays in Japan are analysed in this study. The frequency-dependent transfer function of soil is calculated as a ratio of the spectrum at uphole to the spectrum at downhole, considering the horizontal component of shear wave. In spectral ratio analysis auto- and cross-spectra are employed. The reduction in the predominant frequency of the transfer function with increases in excitation level reflects the non-linear response of the soil. Results of analysis demonstrate a significant non-linear ground response at six sites with surface PGA exceeding 90 gal. However, the results of one site show the linear response up to 130 gal surface PGA. Furthermore, the in situ strain-dependent soil behaviour is examined through the shear modulus – shear strain relationship. When compared, the actual and laboratory results of the shear strain – shear modulus relationship are in agreement. Additionally, a good consistency between the tendency of reduction in shear modulus ratio with shear strain increases, and reduction of predominant frequency with ground motion increases, confirms the significance of non-linearity in site effects study.     

苏鲁超高压变质岩中地震波速随围压的变化规律

我们在10~800MPa的静水压力下测量了中国大陆科学钻探(CCSD)主孔岩心和采自苏鲁地区地表露头上的共68块典型超高压变质岩试样的地震波速,并建立了波速和围压的定量关系,成功地解释了描述这一定量关系方程中4个参数的物理意义。笔者相信,本文将为超高压变质岩地区以及新老俯冲带地震波资料的解释提供必不可少的理论和实验支撑。     

不同矿化度下泥质对岩石电性影响的逾渗网络研究

为了进一步认识泥质对岩石宏观电性的影响规律,本文利用非规整三维逾渗网络模型,通过数值模拟研究了不同矿化度下泥质对岩石电性影响的规律. 模拟结果表明：在中低矿化度下,泥质对岩石导电整体上呈现减阻作用,随着泥质含量的增加,电阻率降低的速度减慢;中等矿化度下泥质的减阻效果明显弱于低矿化度下的减阻效果;在高矿化度下泥质对岩石导电整体上呈现增阻作用. 在高矿化度、高含水饱和度下泥质对岩石电性的影响较小. 泥质起减阻、增阻作用的具体矿化度范围取决于储层的孔隙度、连通性以及地层温度等特性.     

考虑土-结构相互作用和岩土参数不确定性的核电厂结构地震响应分析

针对核电厂结构,在考虑土-结构相互作用(SSI)的情况下进行随机地震反应分析,探讨地基岩土参数的不确定性对反应堆厂房楼层反应谱(FRS)的影响。运用ANSYS软件模块建立核电厂(NPP)结构有限元模型,通过设置边界弹簧单元和阻尼装置来考虑SSI效应;并且通过设置具有概率意义的弹簧刚度和阻尼系数,来模拟土特性参数的不确定性。随机响应分析与确定性分析的结果对比,揭示了岩性地基条件下SSI效应对核电厂FRS的影响以及地基岩土参数不确定性对FRS的影响程度。研究表明,在岩性地基条件下,亦不应忽略SSI效应;考虑SSI效应的随机分析模型同确定性模型相比,二者的分析结果较为接近,两方法都可用于NPP的FRS敏感性分析评估之中,并可进行相互比照。     

黄海、东海海区水体散射特性研究

半分析模型是水色遥感反演算法的研究热点,而水体后向散射系数对建立半分析水色反演模型是非常重要的参数.通过对黄海、东海海区的水体固有光学量测量数据进行分析,得到水体总后向散射系数与水体总散射系数的关系为乘幂关系,颗粒物后向散射系数随光谱变化的指数在高低浑浊度水体有很大差异,并初步得到黄海、东海海区水体的后向散射系数与总悬浮物浓度的关系,从而为水色半分析模型建立和水光学辐射计算提供一组散射特性模型.     

琼胶/SiO2复合纤维的制备及性能研究

利用湿法纺丝技术制备了琼胶/SiO₂复合纤维,对琼胶分子在溶液中的分散性、纺丝液流变性、纤维的形貌、化学结构分别用DLS、旋转黏度计、SEM、FTIR和XRD进行了表征,并对纤维的力学性能、热性能和吸湿性能进行了测定。研究结果表明：琼胶分子在溶液中呈纳米尺度分布,纺丝液具有良好的流动性;琼胶/纳米SiO₂复合纤维具有良好的形态。随着纳米SiO₂的添加量逐渐提高,复合纤维的力学拉伸强度先增强后降低,复合纤维的吸水性降低,复合纤维的热稳定性逐渐增强。结合复合纤维综合性能,纳米SiO₂的最佳添加质量分数为0.5%。     

土结构性本构模型研究现状综述

土本构模型的建立是一个重要而又复杂的问题,到目前为止,国内外学者们已提出数以百计的土本构模型,诸多文献也对这些模型进行了评述和归纳。然而这些土本构模型多是在扰动土或砂土的基础上发展和建立起来的,它们难以描述由于土结构性引起的各种非线性行为,其计算结果与实际情况相差甚远。天然土体一般都具有一定的结构性,所以有必要建立考虑土结构性影响的土本构模型。针对这个现实,目前有些学者已基于各种理论和方法,提出了一些可以考虑土结构性影响的土本构模型,并得了较好的应用。但在目前的文献中还很少有对土的结构性本构模型研究进行归纳,基于此,本文简要介绍了一下目前土的结构性本构模型研究现状,并提出了这些本构模型在应用中所存在的问题。