线纹计量器具检定系统表修订建议

JJG 2001-1987《线纹计量器具检定系统》是我国线纹计量器具进行量值传递的检定系统表,但其存在着许多不足,已无法满足当今计量检定的需要。此处对该检定系统表进行详细分析后给出修订建议,并介绍了目前国际上有关动向,提出了一些有益建议。     

降水云中液水含量的空基遥感

在建立不同降水云垂直结构模式的基础上，利用矢量微波辐射传扬模式进行空基云雨遥感的数值试验。结果表明：星载微波辐射计6．9GHz通道对降水云的冰层很不敏感，而对降水云校总液水含量(LWC)非常敏感；辐射亮温(Tb)随LWC呈单调变化关系；进一步考查这个频率下b的两个极化分量差△Tb(＝Tbv—Tbh)和LWC的关系发现，不同云结构(对流云和层状云)对△Tb-LWC关系影响较小。研究分析表明，6．9GHz的v,h两个通道有可能用于遥感降水云的液水总量。     

Retrieval of remotely sensed LAI using Landsat ETM+ data and ground measurements of solar radiation and vegetation structure: Implication of leaf inclination angle

A time series of leaf area index (LAI) of a managed birch forest in Germany (near Dresden) has been developed based on 16-day normalized difference vegetation index (NDVI) data from the Landsat ETM+ sensor at 30 m resolution. The Landsat ETM+ LAI was retrieved using a modified physical radiative transfer (RTM) model which establishes a relationship between LAI, fractional vegetation cover (fC), and given patterns of surface reflectance, view-illumination conditions and optical properties of vegetation. In situ measurements of photosynthetically active radiation (PAR) and vegetation structure parameters using hemispherical photography (HSP) served for calibration of model parameters, while data from litter collection at the study site provided the ground-based estimates of LAI for validation of modelling results. Influence of view-illumination conditions on optical properties of canopy was simulated by a view angle geometry model incorporating the solar zenith angle and the sensor viewing angle. Effects of intra-annual and inter-annual variability of structural properties of the canopy on the light extinction coefficient were simulated by implementing variability of the leaf inclination angle (LIA), which was confirmed in the study site. The results revealed good compatibility of the produced Landsat ETM+ LAI data set with the litter-estimated LAI. The results also showed high sensitivity of the LAI retrieval algorithm to variability of structural properties of the canopy: the implementation of LIA dynamics into the LAI retrieval algorithm significantly improved the model accuracy.     

面向航空倾斜影像空三转点的特征提取算子比较

首先对4种常见的尺度和旋转不变特征算子：SIFT,SURF,MSER,ORB进行简单的介绍。为定量比较各种特征算子在航空影像自动转点中的性能,本文提出了3种与倾斜影像相关的指标,并结合常用的4种指标组成本文的7个定量评价指标。在此基础上,采用一组倾斜影像数据进行了试验,结果表明,SURF/SIFT算子在航空倾斜影像空三转点中具有相对较好的性能,MSER次之,而ORB的效果较差。     

基于卫星短消息通信的大地测量信息传输技术

无线通信是大地测量内外业一体化生产中的瓶颈问题。首先介绍了大地测量信息传输系统的基本功能,给出了通信管理功能的基本结构,然后重点讨论了通信管理中的一些关键技术:用户终端与计算机控制程序之间的信息组织、利用CRC校验和多重确认进行误码控制、建立传输队列来防止信号失锁造成的信息拥塞。最后通过试验分析,验证了利用卫星短消息通信进行大地测量信息传输的可行性。     

Non-destructive estimation of potato leaf chlorophyll from canopy hyperspectral reflectance using the inverted PROSAIL model

Optimizing nitrogen (N) fertilization in crop production by in-season measurements of crop N status may improve fertilizer N use efficiency. Hyperspectral measurements may be used to assess crop N status by estimating leaf chlorophyll content. This study evaluated the ability of the PROSAIL canopy-level reflectance model to predict leaf chlorophyll content. Trials were conducted with two potato cultivars under different N fertility rates (0–300 kg N ha⁻¹). Canopy reflectance, leaf area index (LAI) and leaf chlorophyll and N contents were measured. The PROSAIL model was able to predict leaf chlorophyll content with reasonable accuracy later in the growing season. The low estimation accuracy earlier in the growing season could be due to model sensitivity to non-homogenous canopy architecture and soil background interference before full canopy closure. Canopy chlorophyll content (leaf chlorophyll content × LAI) was predicted less accurately than leaf chlrophyll content due to the low estimation accuracy of LAI for values higher than 4.5.     

On the link between GPS pseudorange noise and day-boundary discontinuities in geodetic time transfer solutions

When neglecting calibration issues, the accuracy of GPS-based time and frequency transfer using a combined analysis of code and carrier phase measurements highly depends on the noise of the GPS codes. In particular, the pseudorange noise is responsible for day-boundary discontinuities which can reach more than 1 ns in the time transfer results obtained from geodetic analysis. These discontinuities are caused by the fact that the data are analyzed in daily data batches where the absolute clock offset is determined by the mean code value during the daily data batch. This pseudorange noise is not a white noise, in particular due to multipath and variations of instrumental delays. In this paper, the pseudorange noise behavior is characterized in order to improve the understanding of the origin of the large day-boundary discontinuities in the geodetic time transfer results. In a first step, the effect of short-term noise and multipath is estimated, and shown to be responsible for only a maximum of 150 ps (picoseconds) of the day-boundary jumps, with only one exception at NRC1 where the correction provides a jump reduction of 300 ps. In a second step, a combination of time transfer results obtained with pseudoranges only and geodetic time transfer results is used to characterize the long-term evolution of pseudorange errors. It demonstrates that the day-boundary jumps, especially those of large amplitude, can be explained by an instrumental effect imposing a common behavior on all the satellite pseudoranges. Using known influences as temperature variations at ALGO or cable damages at HOB2, it is shown that the approach developed in this study can be used to look for the origin of the day-boundary discontinuities in other stations.     

野外大长度量值传递稳定性与可靠性分析

因瓦基线尺是国家野外大长度量值传递的法定标准器,本文通过对一组因瓦基线尺多年的检定资料、基线场的多次测量成果以及与维塞拉光波干涉仪测量成果的比较分析,论述我国野外大长度量值传递的稳定性与可靠性.     

高斯曲线优化能见度与气溶胶光学厚度转换模型

大气气溶胶是影响对地观测定量精度的最主要不确定性因素。随着定量遥感的发展,对气溶胶光学厚度数据的精度提出了更高要求。在广泛应用的基于辐射传输模型大气校正研究中,需要输入气溶胶光学厚度等关键参数,但与对地观测影像数据同时相的气溶胶光学厚度获取较难,而水平能见度作为表征气溶胶光学特性的间接参数可通过广泛分布的气象台站获得,可将能见度转换得到的气溶胶光学厚度数据作为同时相数据输入传输模型进行大气校正计算。本文以实测的能见度和气溶胶光学厚度数据为基础,通过拟合气溶胶标高其随时间的变化对Peterson模型进行了修正。对修正后的模型进行精度验证得到RMSE为0.254,结果表明优化的模型对精度有较大提升。     

GPS-RTK技术在打桩船中的应用研究

详细介绍了RTK技术在打桩船中的应用,分析其可以达到的精度,通过大量的实验和测量数据统计,论证RTK使用过程中的注意事项,得出减小其定位误差的较好方法。