昭通示范区黄金坝气田五峰—龙马溪组页岩气储层地质特征

昭通国家级页岩气示范区黄金坝气田是继礁石坝和长宁—威远之后中国又一个在页岩气勘探、开发领域实现重大突破的地区,为了系统地展示黄金坝气田页岩气资源富集的储层条件,为未来的勘探工作提供参考,以五峰—龙马溪组页岩气储层为研究对象,从区域地质条件、储层岩石学、物性和地球化学4个方面对该页岩气储层进行了综合研究。结果表明稳定的区域构造和良好的顶底板条件是黄金坝地区页岩气资源富集的关键,良好的保存条件使储层维持了较高的压力(压力系数1);较高的孔隙度(平均4%)和TOC含量(目的层2%)提供了良好的储集空间,使储层具有较高的含气量(1.35~3.48 cm3/g,平均2.50 cm3/g);天然气地球化学数据表明,区内天然气主要成分为CH4(97%),其次还含有少量的C2H6、C3H8和CO2;天然气同位素数据表明烃类C同位素组成发生了倒转,表明储层具有良好的封闭性。但储层孔隙系统较为复杂,且非均质性极强,从而导致渗透率较低,在储层改造施工过程中应予以充分考虑。总体上,黄金坝气田具有较好的开发前景,生产测试表明,区内直井压裂产量为0.5×104~3.5×104m3/d/井,水平井压裂产量可达12×104~40×104m3/d/井。     

尕斯库勒盐湖中CO_2-卤水-盐岩相互作用模拟研究

利用PHREEQC软件模拟CO2侵入后,尕斯库勒盐湖中CO2-卤水-岩盐之间的相互作用。CO2侵入卤水层后,卤水中元素的化学形态种类和大小发生变化,特别是碳酸盐型的络合物形态增多。CO2侵入后,除了碳酸盐、石盐和硫酸盐矿物达到饱和被析出外,其余矿物的不饱和程度加剧,卤水的TDS增大,pH值减小。卤水中U的含量在CO2侵入后发生沉淀而减小。研究成果对深入评估区域内盐水层CO2地质封存的环境风险和利用CO2分离提取盐湖卤水中的铀元素提供理论依据。     

Three dimensional seismic studies of deep-water hazard-related features on the northern slope of South China Sea

Mass transport deposits and geological features related to fluid flow such as gas chimneys, mud diapirs and volcanos, pockmarks and gas hydrates are pervasive on the canyon dominated northern slope of the Pearl River Mouth basin of the South China Sea. These deposits and structures are linked to serious geohazards and are considered risk factors for seabed installations. Based on high resolution three dimensional seismic surveys, seismic characteristics, distributions and origins of these features are analyzed. A distribution map is presented and geometrical parameters and spatial distribution patterns are summarized. Results show that various groups of the mapped features are closely tied to local or regional tectonism and sedimentary processes. Mass transport complexes are classified as slides near the shelf break, initially deformed slumps on the flanks of canyons and highly deformed slumps on the lower slope downslope of the mouth of canyons. We propose them to be preconditioned by pore pressure changes related to sea level fluctuations, steep topography, and fluid and fault activities. Gas chimneys are mainly located in the vicinity of gas reservoirs, while bottom-simulating reflectors are observed within the gas chimney regions, suggesting gas chimneys serve as conduits for thermogenic gas. Mud diapirs/volcanos and pockmarks are observed in small numbers and the formation of pockmarks is related to underlying gas chimneys and faults. This study aims at reducing risks for deep-water engineering on the northern slope of South China Sea.     

Microstructural characteristics of the Whitby Mudstone Formation (UK)

When trying to improve gas productivity from unconventional sources a first aim is to understand gas storage and gas flow potential through the rock by investigating the microstructure, mineralogy and matrix porosity of unfractured shale. The porosity and mineralogy of the Mulgrave Shale member of the Whitby Mudstone Formation (UK) were characterized using a combination of microscopy, X-ray diffraction and gas adsorption methods on samples collected from outcrops. The Whitby Mudstone is an analogue for the Dutch Posidonia Shale which is a possible unconventional source for gas. The Mulgrave shale member of the Whitby Mudstone Formation can microstructurally be subdivided into a fossil rich (>15%) upper half and a sub-mm mineralogically laminated lower half. All clasts are embedded within a fine-grained matrix (all grains < 2 μm) implying that any possible flow of gas will depend on the porosity and the pore network present within this matrix. The visible SEM porosity (pore diameter > 100 nm) is in the order of 0.5–2.5% and shows a non-connected pore network in 2D. Gas adsorption (N2, Ar, He) porosity (pore diameters down to 2 nm) has been measured to be 0.3–7%. Overall more than 40% of the visible porosity is present within the matrix. Comparing the Whitby Mudstone Formation to other (producing) gas shales shows that the rock plots in the low porosity and high clay mineral content range, which could imply that Whitby Mudstone shales could be less favourable to mechanical fracturing than other gas shales. Estimated permeability indicates values in the micro-to nano-darcy range.     

Investigation of gas content of organic-rich shale:A case study from Lower Permian shale in southern North China Basin,central China

Measuring gas content is an essential step in estimating the commerciality of gas reserves. In this study,eight shale core samples from the Mouye-1 well were measured using a homemade patented gas desorption apparatus to determine their gas contents. Due to the air contamination that is introduced into the desorption canister, a mathematical method was devised to correct the gas quantity and quality.Compared to the chemical compositions of desorbed gas, the chemical compositions of residual gas are somewhat different. In residual gas, carbon dioxide and nitrogen record a slight increase, and propane is first observed. This phenomenon may be related to the exposure time during the transportation of shale samples from the drilling site to the laboratory, as well as the differences in the mass, size and adsorptivity of different gas molecules. In addition to a series of conventional methods, including the USBM direct method and the Amoco Curve Fit(ACF) method, which were used here for lost gas content estimation, a Modified Curve Fit(MCF) method, based on the 'bidisperse' diffusion model, was established to estimate lost gas content. By fitting the ACF and MCF models to gas desorption data, we determined that the MCF method could reasonably describe the gas desorption data over the entire time period, whereas the ACF method failed. The failure of the ACF method to describe the gas desorption process may be related to its restrictive assumption of a single pore size within shale samples. In comparison to the indirect method, this study demonstrates that none of the three methods studied in this investigation(USBM, ACF and MCF) could individually estimate the lost gas contents of all shale samples and that the proportion of free gas relative to total gas has a significant effect on the estimation accuracy of the selected method. When the ratio of free gas to total gas is lower than 45%, the USBM method is the best for estimating the lost gas content, whereas when the ratio ranges from 45% to 75% or is more than 75%, the ACF and MCF methods, are the best options respectively.     

Multi-factor sensitivity analysis on the stability of submarine hydrate-bearing slope

There are many factors affecting the instability of the submarine hydrate-bearing slope (SHBS), and the interaction with hydrate is very complicated. In this paper, the mechanical mechanism of the static liquefaction and instability of submarine slope caused by the dissociation of natural gas hydrate (NGH) resulting in the rapid increase of pore pressure of gas hydrate-bearing sediments (GHBS) and the decrease of effective stress are analyzed based on the time series and type of SHBS. Then, taking the typical submarine slope in the northern South China Sea as an example, four important factors affecting the stability of SHBS are selected, such as the degree of hydrate dissociation, the depth of hydrate burial, the thickness of hydrate, and the depth of seawater. According to the principle of orthogonal method, 25 orthogonal test schemes with 4 factors and 5 levels are designed and the safety factors of submarine slope stability of each scheme are calculated by using the strength reduction finite element method. By means of the orthogonal design range analysis and the variance analysis, sensitivity of influential factors on stability of SHBS are obtained. The results show that the degree of hydrate dissociation is the most sensitive, followed by hydrate burial depth, the thickness of hydrate and the depth of seawater. Finally, the concept of gas hydrate critical burial depth is put forward according to the influence law of gas hydrate burial depth, and the numerical simulation for specific submarine slope is carried out, which indicates the existence of critical burial depth.     

川东南丁山地区龙马溪组页岩裂缝特征及对含气性的影响

川东南丁山地区是近年来四川盆地页岩气勘探开发的热点区域,裂缝的发育对页岩含气性及保存条件有重要的影响。综合运用野外露头、岩心、测井资料,结合岩石脆性矿物含量、岩石力学参数等数据,深入分析龙马溪组页岩裂缝发育特征和控制因素,并探讨了裂缝发育对含气性的影响。结果表明,丁山地区龙马溪组页岩裂缝主要以构造成因的剪切缝为主,裂缝优势方位共6组,主要包括4组平面剪切缝和2组剖面剪切缝,其发育主要受2个方向、3个阶段的构造应力场影响而成;裂缝延伸稳定,平均密度小,宽度小,充填程度高,主要被方解石和黄铁矿等充填。裂缝受控因素主要包括古构造应力场、构造部位、脆性矿物组分、岩石力学性质等;断层对裂缝发育具有明显的控制作用,其中断层两盘均存在裂缝发育程度急剧下降的临界范围,临界范围内裂缝发育程度高,超过此临界范围,裂缝发育程度变差且变化趋于平缓;不同期次的裂缝中,形成时间晚、规模过大、充填程度不高、与现今地应力方向一致或呈低角度相交的裂缝易造成页岩气的散失,对提高页岩含气性不利;龙马溪组岩石脆性矿物含量高,脆性指数属中等偏上程度,有利于构造缝发育且可压性较好。随着距齐岳山断裂距离的适当增加,龙马溪组页岩埋藏深度适中,地层压力增大,抗压强度增强高,脆性指数适中,构造保存条件变好,有利于不同方位的裂缝发育和页岩含气量的增加,位于该区域的DY2井与DY4井均位于该有利区域,含气性良好。研究结果对下一步深化页岩气勘探开发具有重要指导作用。     

2010—2020年黄河下游河南典型灌区浅层地下水中砷和氟的演化特征及变化机制

黄河下游典型灌区河南段是豫北平原重要的农业种植区。该地区浅层水质整体较差,因常用于作物灌溉或家畜饮用,会对人体健康产生风险,因此对该地区地下水中砷与氟浓度变化特征和机制的研究将有助于提高对该地区地下水污染的认识水平。本文基于2010年和2020年在灌区范围内采集的327组浅层地下水样品,研究区内地下水砷和氟分布情况,并在此基础上对比研究十年间灌区浅层地下水中砷、氟的演化特征,探索分析砷与氟浓度及空间变化机制。研究结果表明：该地区浅层地下水中存在砷与氟超标问题,2020年浅层地下水中高砷（砷浓度大于10μg/L）和高氟（氟浓度大于1mg/L）的样品数量分别占总数的26.1%和26.06%。高砷水分布在太行山前洼地与黄河冲积平原等泥沙互层结构的沉积环境中,还原性较强,同时地下水径流不畅,较强的阳离子交换作用使得其所处环境中Ca²⁺浓度较高。近十年间砷浓度增加的水样占总数31.8%,砷浓度减少的水样占36.7%。砷浓度的增长（减少）是地下水还原性增强（减弱）使得锰氧化物溶解释放（吸附）导致。近十年间不同地区农业灌溉和水源置换等用水方式导致水位变化是引起砷浓度变化的潜在因素。高氟水主要分布在河南新乡与濮阳的黄河沿线,氟离子浓度受到沉积物中萤石等钙质矿物溶解影响,使得高氟地下水出现在低钙环境中。近十年间研究区中氟离子浓度减少的占总数60.2%,氟离子浓度增加的占32.1%,整体变化趋势向好,但是高氟区中氟离子浓度继续增加。氟浓度的变化同样受到Ca²⁺变化影响,在Ca²⁺浓度降低（升高）时氟浓度进一步升高（降低）。地下水中氟升高地区分布在黄河沿线,因此受到黄河水补给影响较大,地下水径流条件较好,阳离子交换作用减弱,使得Ca²⁺浓度降低,此时地下水中砷浓度受到环境影响而降低,因此研究区氟增加地区中砷与氟的分布和演化呈现反向关系。     

西气东输管道工程中卫黄河穿越隧道场地工程地质条件评价

西气东输工程中卫黄河穿越隧道长1197.77m,高4.3m,宽5.6m。隧道入口高于黄河水位28m,出口高于黄河水位45m。隧道顶板高程为1130m。位于黄河水下100m。隧道场地围岩为寒武系磨盘井组灰绿色、银灰色浅变质中厚层细粒长石石英砂岩、千枚状板岩、绢云母化千枚岩。围岩为弱风化Ⅲ～Ⅳ类岩石。透水率为4～67Lu,纵波波速为500～3300m.s-1。BQ为300～400。变形模量为6.11～9.22GPa。泊松比（）0.14～0.24。内摩擦角（）为42.1～44.7。地下水为基岩裂隙水。含水层为寒武系浅变质岩,受大气降水渗入补给,单井涌水量为1.0～50m3.d-1。隧道轴线穿越区岩体较完整较破碎,未有全新活动断层。隧道位置选择和开挖深度设计是可行的。施工和长期运营是安全的。     

Effective medium modeling to assess gas hydrate and free-gas evident from the velocity structure in the Makran accretionary prism, offshore Pakistan

Seismic properties of sediments are strongly influenced by pore fluids. Stiffness of unconsolidated marine sediment increases with the presence of gas hydrate and decreases with the presence of gas. A strong bottom-simulating reflector (BSR) observed on a seismic profile in the Makran accretionary prism, offshore Pakistan, indicates the presence of gas hydrate and free-gas across the BSR. Elastic properties of gas depend largely on pressure and temperature. We, therefore, first determine the elastic modulus of gas at pressure and temperature calculated at the BSR depth in the study region. The interval velocities derived from the seismic data are interpreted by the effective medium theory, which is a combination of self-consistent approximation and differential effective medium theories, together with a smoothing approximation, for assessment of gas hydrate and free-gas. The results show the saturations of gas hydrate and free-gas as 22 and 2.4% of pore space, respectively, across the BSR.