Difference characteristics of sea surface temperature observed by GLI and AMSR aboard ADEOS-II

This study compares infrared and microwave measurements of sea surface temperature (SST) obtained by a single satellite. The simultaneous observation from the Global Imager (GLI: infrared) and the Advanced Microwave Scanning Radiometer (AMSR: microwave) aboard the Advanced Earth Observing Satellite-II (ADEOS-II) provided an opportunity for the intercomparison. The GLI-and AMSR-derived SSTs from April to October 2003 are analyzed with other ancillary data including surface wind speed and water vapor retrieved by AMSR and SeaWinds on ADEOS-II. We found no measurable bias (defined as GLI minus AMSR), while the standard deviation of difference is less than 1°C. In low water vapor conditions, the GLI SST has a positive bias less than 0.2°C, and in high water vapor conditions, it has a negative (positive) bias during the daytime (nighttime). The low spatial resolution of AMSR is another factor underlying the geographical distribution of the differences. The cloud detection problem in the GLI algorithm also affects the difference. The large differences in high-latitude region during the nighttime might be due to the GLI cloud-detection algorithm. AMSR SST has a negative bias during the daytime with low wind speed (less than 7 ms⁻¹), which might be related to the correction for surface wind effects in the AMSR SST algorithm.     

GALILEO系统仿真与分析

本文着重阐述了GALILEO仿真系统星座和误差模型的构建过程,利用该系统进行DOP值分析并通过定位解算验证了GALILEO系统的性能指标。通过与GPS系统性能指标进行比较,得出GALILEO系统的星座设计具有较好的DOP值分布特性,定位精度优于GPS定位精度。在进行差分定位时,其误差贡献比较大的是接收机噪声和卫星钟差,因此提高差分定位的关键是降低接收机的噪声水平和提高卫星钟差预报精度。     

单中继星单低轨卫星的联合定轨精度分析

针对由单中继星和单低轨卫星组成的联合定轨系统,给出了系统内不同轨道卫星摄动项的选取方案和卫星间的可见性判别模型。在模拟出含有白噪声的四程测距观测数据文件的基础上,研究了测距精度和采样弧段对联合定轨中高、低轨卫星定轨精度的影响。得出如下结论:联合定轨更有利于对低轨卫星的轨道改进;同样的采样时间条件下,测距噪声越小定轨精度越高,并且采样时间越短它的影响越明显;同样的测距噪声条件下,所用资料的采样时间越长精度越高,但当测距精度很高时,TDRS达到最好定轨精度所需的采样时间相应有所缩短。并在定出轨道后进行了轨道预报,分析了轨道预报的趋势及精度。     

基于卫星短消息通信的大地测量信息传输技术

无线通信是大地测量内外业一体化生产中的瓶颈问题。首先介绍了大地测量信息传输系统的基本功能,给出了通信管理功能的基本结构,然后重点讨论了通信管理中的一些关键技术:用户终端与计算机控制程序之间的信息组织、利用CRC校验和多重确认进行误码控制、建立传输队列来防止信号失锁造成的信息拥塞。最后通过试验分析,验证了利用卫星短消息通信进行大地测量信息传输的可行性。     

利用Jason-1卫星确定全球平均海面高

介绍了卫星测高数据处理的基本方法,分析研究了卫星测高的主要误差,提出了Jason-1的数据编辑准则,并用其测高数据确定了全球平均海面高,与CLS01模型进行了比较分析.     

基于精密星历的计算卫星位置的方法

分析了拉格朗日多项式插值算法,提出了将Neville算法实现于精密星历的插值,数值试验表明,其克服了函数插值的龙格现象,有很好的逼近效果.     

定位卫星轨道监视系统研究

与卫星测控中心的卫星轨道参数相比,地球同步卫星定位系统中轨道计算子系统所计算出的卫星星历数据具有实时性强、精度高的特点,如何有效利用该星历数据来分析卫星轨道运行情况是该领域的一个热门研究课题。在介绍卫星轨道测定法的基础上,提出了以卫星速度变化率和卫星星下点为主要监视内容的卫星轨道监视系统,通过系统的试运行结果可以看出,该系统能够有效地监视卫星的瞬时和长期运行情况,为卫星的在轨运行管理提供了一种直观、形象的监视方法。     

风云卫星遥感数据高精度地理定位软件系统开发研究

为了适应风云气象卫星遥感数据高精度地理定位要求,在研究和比较分析现有环境气象卫星遥感数据地理定位方法,尤其对其中关键的轨道计算模型进行对比研究之后,我们使用变阶变步长多步卫星轨道数值计算模型(DE/DEABM)进行气象卫星轨道计算,研制开发了新一代卫星轨道计算及遥感数据地理定位软件系统.该软件系统中卫星轨道数值积分计算模型包含了多项摄动因素计算,特别是对低轨卫星影响较大的因素,其中地球的球形引力项使用了高精度高阶EGM-96地球引力场模型,提高了非球形引力摄动计算精度,另外还考虑了太阳、月亮引力项,辐射光压摄动和大气摄动因素,使得轨道计算精度大大提高.在遥感数据定位算法开发工作中,以中国2002年5月发射的风云1号D星10通道扫描辐射计和计划2008年上半年发射的风云3号A卫星中分辨率光谱成像仪等遥感仪器为对象,比较详细地分析和研究了探测器、焦平面、主光学系统和扫描镜等遥感仪器几大关键部件的光学几何关系,提高了坐标转换系统计算精度.经过对风云1号D星多天逐日的轨道计算和定位计算试验,结果表明该软件系统24h风云1号D星轨道计算卫星矢径精度可达到几十厘米至几十米,较原来平根数分析解方法1000m左右精度有显著量级的提高.同时,风云1号D星遥感数据地理定位精度达到星下点1个像元.     

Study on the connectivity of heavy oil reservoirs by ultraviolet spectrum technique in the western part of the QHD32-6 oilfield

As a new method, the ultraviolet spectrum technique is applied to studying the connectivity of biode-gradable heavy oil reservoirs. The similarity of crude oils can be judged according to the extinction coefficient （E） because aromatic hydrocarbons and non-hydrocarbons have conjugated bonds and obvious absorption in the ultraviolet range, and different materials have different characteristics and additives. The relationship diagram is made in terms of the extinction coefficients （E） of the samples by taking E as the Y-axis and wavelength as the X-axis. The connectivity of oil reservoirs is estimated according to the curve positions and characteristic fingerprints of the sampies. The connectivity of part of the reservoirs in the western part of the QHD32-6 oilfield was studied with this method. The results showed that the connectivity of samples from wells F7 and F8 in the Nm-2 oil reservoir zone is good, that of samples from wells F17 and F20 in the Nm-1 oil reservoir zone also is good, and that of samples from wells F17, F19, and F20 is poor.     

GNSS three carrier ambiguity resolution using ionosphere-reduced virtual signals

This paper presents a general modeling strategy for ambiguity resolution (AR) and position estimation (PE) using three or more phase-based ranging signals from a global navigation satellite system (GNSS). The proposed strategy will identify three best “virtual” signals to allow for more reliable AR under certain observational conditions characterized by ionospheric and tropospheric delay variability, level of phase noise and orbit accuracy. The selected virtual signals suffer from minimal or relatively low ionospheric effects, and thus are known as ionosphere-reduced virtual signals. As a result, the ionospheric parameters in the geometry-based observational models can be eliminated for long baselines, typically those of length tens to hundreds of kilometres. The proposed modeling comprises three major steps. Step 1 is the geometry-free determination of the extra-widelane (EWL) formed between the two closest L-band carrier measurements, directly from the two corresponding code measurements. Step 2 forms the second EWL signal and resolves the integer ambiguity with a geometry-based estimator alone or together with the first EWL. This is followed by a procedure to correct for the first-order ionospheric delay using the two ambiguity-fixed widelane (WL) signals derived from the integer-fixed EWL signals. Step 3 finds an independent narrow-lane (NL) signal, which is used together with a refined WL to resolve NL ambiguity with geometry-based integer estimation and search algorithms. As a result, the above two AR processes performed with WL/NL and EWL/WL signals respectively, either in sequence or in parallel, can support real time kinematic (RTK) positioning over baselines of tens to hundreds of kilometres, thus enabling centimetre-to-decimentre positioning at the local, regional and even global scales in the future.