北太平洋中尺度涡时空特征分析

利用1993~2011年19 a的AVISO卫星高度计资料研究了北太平洋(10°~60°N,120°E~100°W)中尺度涡的时空分布特征,结果表明:北太平洋每年约产生1 800余个涡旋,其中气旋涡稍多。北太平洋东部沿岸、西北沿岸、黑潮延伸体北侧、副热带逆流区是中尺度涡的高发区,春、冬季是涡旋的高发季节。涡极性分布以35°N为界,北部多反气旋涡,南部多气旋涡。涡旋半径以100 km左右为主,并且基本随纬度升高而减小,涡旋数量随着周期增长而急剧下降。反气旋涡的平均半径和周期均大于气旋涡。利用Argo浮标剖面资料分析的6个个例涡旋的垂直结构显示,每个涡旋都有其独特的冷暖核结构,深度不同。研究结果对于分析北太平洋涡动能分布及传输具有一定的参考价值。     

广西北仑河口红树林保护区表层海水溶解态重金属时空分布及其影响因素

根据2013年5月(春季)和8月(夏季)对广西北仑河口红树林保护区的现场调查监测数据,研究了表层海水中溶解态重金属Cu、Zn、Pb、Cd、Cr、As、Hg的时空分布特征,探讨了其影响因素,并对其污染水平进行了评价。结果表明,表层海水各溶解态重金属的浓度、空间波动程度在春、夏季均存在一定的差异;Hg的污染明显超过国家一类海水水质标准,且夏季污染水平高于春季。Cu-Zn、Cu-Cd、Zn-Pb、Zn-Cd之间存在显著正相关,春、夏季As以及夏季Cr分别与盐度之间呈显著正相关,其他重金属与盐度之间无显著相关性。各重金属的时空分布主要受到陆源输入、沿岸江河冲淡水和海水盐度变化等因素的影响。     

基于高性能计算平台的天宫一号遥感数据地面预处理系统

针对天宫一号传感器特点,设计并实现了基于高性能并行集群环境的遥感数据地面预处理系统,可完成对高并发、海量遥感数据处理任务的快速、高效处理.该系统可通过传感器的星上定标参数完成系统辐射校正、系统几何校正等处理过程,生产出高光谱热红外谱段和高光谱数据的1级、2级遥感产品.同时,在数据产品封装与输出分系统中,采用了较为通用的GeoTiff与HDF作为产品的主要输出格式,可满足领域内多种用户的需求.     

基于ICESat-2 ATLAS数据的DEM高程精度评价

为探究ASTER GDEMV3、SRTM1 DEM和AW3D30 DEM 3种开源DEM数据的高程精度,本文以高精度ICESat-2 ATLAS测高数据为参考数据,利用GIS统计分析、误差相关分析及数理统计对DEM的高程精度进行对比评价。结果表明：①AW3D30的质量最稳定;SRTM1 DEM在平原精度最高;在高原山地精度由高到低依次为AW3D30 DEM、ASTER GDEMV3、SRTM1 DEM。②DEM数据高程精度受地表覆盖影响较大,且与地形因素密切相关,在相同地表覆盖的两个研究区中DEM数据高程精度表现情况不一致,SRTM在平原地表覆盖下精度表现最好,平均误差为3.15 m,AW3D30 DEM在山地地表覆盖下精度表现最好,平均误差为7.61 m。③坡度对DEM数据的高程精度影响较大,在两个研究区3种DEM数据的高程误差均随坡度的增加而增加;坡向对DEM数据的高程精度影响较小,未发现明显的规律。     

西安市浅层地温场垂向分布特征及其影响因素分析

根据西安市内布设的12口长观孔监测的一年内的月平均地温,绘制不同时期地温随深度变化曲线,系统分析西安市浅层地温场垂向上的分布特征及其影响因素。分析得出：西安市垂向上的分布特征有两种类型：渐变升温型和升温降温交替型。影响其分布的主要因素是地质构造、地下水活动以及岩性。在开发利用过程中要针对浅层地温场不同的变化类型因地制宜地进行调查评价工作,合理开发西安市浅层地温能。     

甘肃清水县地质灾害类型、形成条件及发育规律分析

清水县是甘肃省地质灾害较为严重的地区之一。本文根据清水县地质灾害调查与区划项目野外调查成果资料,在概述县域自然地理条件及地质背景的基础上,全面阐述了全县已有的地质灾害类型及特征,从地形地貌、岩土体类型与结构、地质构造、大气降水、人类工程活动5个方面深入分析了地质灾害的形成条件,并探讨了地质灾害的分布发育规律,以期为区域地质灾害防治提供科学依据。     

定向钻穿越技术在清江河天然气管道敷设的应用

清江河天然气管道工程是在河床下穿越1500多米的Φ1016×26.2天然气钢管和Φ114硅管套管。该河为通航河道,河底地面高程最低-5.90m左右,最大水深6.0~8.6m。地层为填土、淤泥质粘粉土、淤泥质粉砂、粉质粘土夹粉砂细砂。施工中通过优化施工方案,针对导向孔轨迹控制、淤泥地层定向钻进纠偏、大口径扩孔清孔和长输大口径管道回拖采取了一些有效的技术措施,确保了工程一次性回拖成功。     

攀枝花市三区地质灾害分布特征及防治

简要论述了攀枝花市三区自然地理、地形地貌、地层岩性、地质构造、地震及新构造运动、岩土体工程地质特征及分布的基础上,统计了攀枝花市三区地质灾害情况,分析了三区地质灾害类型及分布特征,提出了相应的防治原则与对策措施。     

Molecular and stable carbon isotopic compositions of saturated fatty acids within one sedimentary profile in the Shenhu,northern South China Sea: Source implications

This study examined the distributions and stable carbon isotopic compositions of saturated fatty acids (SaFAs) in one 300 cm long sedimentary profile, which was named as Site4B in Shenhu, northern South China Sea. The concentrations of total SaFAs in sediments ranged from 1.80 to 10.16 μg/g (μg FA/g dry sediment) and showed an even-over-odd predominance in the carbon chain of C₁₂ to C₃₂, mostly with n-C₁₆ and n-C₁₈ being the two major components. The short-chain fatty acids (ScFAs; n-C₁₂ to n-C₁₈) mainly from marine microorganisms had average δ¹³C values of −26.7‰ to −28.2‰, whereas some terrigenous-sourced long-chain fatty acids (LcFAs; n-C₂₁ to n-C₃₂) had average δ¹³C values of −29.6‰ to −34.1‰. The other LcFAs (n-C₂₄ & n-C₂₆ ∼ n-C₂₈; average δ¹³C values are −26.1‰ to −28.0‰) as well as n-C₁₉ and n-C₂₀ SaFAs (average δ¹³C values are −29.1‰ and −29.3‰, respectively) showed a mixed signal of carbon isotope compositions.The relative bioproductivity calculation (marine vs. terrigenous) demonstrated that most of organic carbon accumulation throughout the sedimentary profile was contributed by marine organism. The high marine productivity in Shenhu, South China Sea may be related to the hydrocarbon seepage which evidenced by diapiric structures. Interestingly, there is a sever fluctuation of terrigenous inputs around the depth of 97 cm below the seafloor (bsf), probably resulting from the influence of the Dansgaard–Oeschger events and the Younger Dryas event as revealed by ¹⁴C age measurements.     

Design of drainage blankets for leachate recirculation in bioreactor landfills using two-phase flow modeling

Drainage blankets (DB) are used for leachate recirculation in bioreactor landfills and consist of highly permeable material placed over a large area of the landfill with the leachate injection pipe embedded in the material at specified locations. DBs are generally installed at different depth levels during the waste filling operations. Very limited information is reported on performance of DBs, and that which exists is based on a small number of field monitoring and modeling studies. A rational method for the design of landfills using DBs has not been developed. This study performs a parametric analysis based on a validated two-phase flow model and presents design charts to guide the design of DBs for given hydraulic properties of MSW, the leachate injection rate and the dimensions and locations of the DB as measured from the leachate collection and recirculation system (LCRS) located at the bottom of the landfill cell. Numerical simulations were performed for the two established MSW conditions: homogeneous–isotropic and heterogeneous–anisotropic waste. The optimal levels of leachate saturation, wetted width, wetted area and developed pore water and pore gas pressures were determined, and design charts using the normalized parameters were developed. An example is presented on the use of design charts for typical field application.