Field vibration mitigation by honeycomb WIB for pile foundations of a high-speed train viaduct

Environmental vibrations from recent high-speed trains are becoming a special concern in the civil and environmental engineering field since they can give detrimental effects to residents, sensitive equipments and high-tech production facilities in the vicinity of train tacks. Herein, aiming at the vibration mitigation for a specific high-tech industrial area, the low-frequency vibrations from a train viaduct are targeted over an anticipated range. A theoretically designed innovative countermeasure, called honeycomb wave impeding barrier (WIB) for a wave impeding barrier, is introduced and its effects are investigated by computer simulation. The present WIB is based on the wave dispersion phenomenon that can modulate the incoming wavelengths into the shorter wavelengths, creating an apparent wave cut-off characteristic in the wave field across WIB installation area. The shorter wavelengths are further impeded due to the impedance ratio of the WIB walls and in-fill materials and absorbed by the in-fills more. The three-dimensional FEM simulation demonstrates a dramatic reduction effect that is difficult to achieve by conventional measures.     

Are open fractures necessarily aligned with maximum horizontal stress?

Fluid flow in fractured rock is an increasingly central issue in recovering water and hydrocarbon supplies and geothermal energy, in predicting flow of pollutants underground, in engineering structures, and in understanding large-scale crustal behaviour. Conventional wisdom assumes that fluids prefer to flow along fractures oriented parallel or nearly parallel to modern-day maximum horizontal compressive stress, or S_Hmax. The reasoning is that these fractures have the lowest normal stresses across them and therefore provide the least resistance to flow. For example, this view governs how geophysicists design and interpret seismic experiments to probe fracture fluid pathways in the deep subsurface. Contrary to these widely held views, here we use core, stress measurement, and fluid flow data to show that S_Hmax does not necessarily coincide with the direction of open natural fractures in the subsurface (>3 km depth). Consequently, in situ stress direction cannot be considered to predict or control the direction of maximum permeability in rock. Where effective stress is compressive and fractures are expected to be closed, chemical alteration dictates location of open conduits, either preserving or destroying fracture flow pathways no matter their orientation.     

Green''''s functions for uniformly distributed loads acting on an inclined line in a poroelastic layered site

Based on one type of practical Biot's equation and the dynamic-stiffness matrices of a poroelastic soil layer and half-space, Green's functions were derived for uniformly distributed loads acting on an inclined line in a poroelastic layered site. This analysis overcomes significant problems in wave scattering due to local soil conditions and dynamic soil-structure interaction. The Green's functions can be reduced to the case of an elastic layered site developed by Wolf in 1985. Parametric studies are then carried out through two example problems.     

Economic valuation of policies for managing acidity in remote mountain lakes: Examining validity through scope sensitivity testing

No Abstract. .The following two amendments concern the above mentioned article that appeared electronically Online First on June13, 2005 (this issue, pp. 274–291).1. the first name of the author Cooper is Philip (and not Phillip).2. the correct grant reference number is EVK1-CT-1999-00032 (instead of: EVK1-CT-2002-00121).     

预测有效波高的深度学习模型研究

研究基于RNN、LSTM、GRU深度学习模型,针对NOAA浮标数据集中的44013、44014、44017浮标的数据,通过斯皮尔曼相关性分析提高模型预测效果。实验结果表明,在进行相关性分析后,S-RNN、S-LSTM、 S-GRU的预测效果均比原始RNN、LSTM、GRU模型预测效果好。此外,提出一种基于LSTM的LSTM-Attention 波高预测模型,并进行相关实验,量化LSTM-Attention模型的预测效果,实验结果表明LSTM-Attention模型有更好的预测效果。为评估模型的泛化能力,研究还提出了一种采用邻近浮标数据进行学习,预测浮标缺失数据的方 法。实验结果表明,该方法的预测精度可以达到97.93%。本研究为海浪预测提供了新的方法和思路,也为未来深 度学习模型在海浪预测中的应用提供了参考。     

利用探地雷达观测分析早春融雪前后沙丘表层土壤含水量的时空分布

积雪融水是古尔班通古特沙漠春季植物发育的重要水源, 快速获取早春沙丘的土壤水分变化具有十分重要的生态学意义. 2010年3、 4月分别使用探地雷达进行了多次测量实验, 结果显示: 1)融雪初期, 沙丘顶部土壤的自由水含量最大, 阳坡次之, 且融雪水在重力作用下沿坡面侧向缓慢流动, 在坡底汇集, 主导了融雪初期乃至整个春季沙丘表层土壤水分的分布格局; 2)融雪后期, 由于阴坡积雪和冻土消融相对滞后, 表层土壤含水量略高于阳坡, 而沙丘顶部由于融雪最早且融雪期间水分转移最多而表面最为干燥; 3)通过与时域反射仪的同步测量结果对比, 探地雷达的测量精度被有效控制在0.03范围内, 且探地雷达提供的连续数据更有利于从细节上把握土壤含水量的变化趋势, 为中小尺度土壤水分的动态研究提供了一种科学、 有效的技术手段.     

瑞雷波勘探在地下洞穴探测中的应用

利用瑞雷波勘探方法进行地下洞穴探测，在实际处理过程中，对场地所测得的面波频散曲线进行分类、归纳，并利用动力触探曲线对各种特征曲线所反映的地下洞穴情况进行标定，从而确定整个测区洞穴的空间分布规律。     

Shear wave velocities and primary influencing factors of Campi Flegrei–Neapolitan deposits

The Campi Flegrei caldera (Italy) has been the site of intense seismic activity over the past decades. This area is densely populated and includes important towns such as Napoli with historical sites and supporting many industries. For the proper use and management of the region, the evaluation of the dynamic properties of near-surface rocks is necessary.

The volcanological pattern has been reconstructed from the lithostratigraphies of several drillings. The most interesting and widespread pyroclastic products are the pozzolana deposit (soil) and the Neapolitan Yellow Tuff (rock). Both pozzolana and tuff products are covered by recent eluvial and coastal sandy deposits and younger volcanic products (<12 000 years). The characteristic ranges of the shear wave velocity (V_s) of the Campi Flegrei–Neapolitan soils and tuffs are defined and the primary influencing factors are evaluated. For the sandy deposits, the results show that eluvial and lacustral products have lower shear wave velocities than coastal products. For the volcanic products younger than 12 000 years b.p. the influence of vertical pressure is emphasized. As regards the pozzolana deposit (soil) and the Neapolitan Yellow Tuff (rock), a major influencing factor is shown by the textural characteristics and the different hardening degrees as a consequence of the diagenetic processes. The scattering of the V_s velocities for the same formation is so wide that only the variability ranges can be individuated. These results suggest a need to carry out detailed V_s measurements or, at least, to make a parametric study of the effect of the V_s ranges on seismic response analysis in order to give safe building codes.