CCSD在线流体监测捕获的气体地球化学异常与2004年9．3级苏门答腊地震可能的超远程关系

中国大陆科学钻探工程在线流体地球化学监测在2004年12月10至2005年1月10日之间捕获到一段重要的气体地球化学异常。该异常从2004年12月24日晚上11点半开始到12月29日晚上7点半结束,其中在12月26日早上7点半到29日晚7点半这段异常非常特殊,表现出流体地球化学的剧烈变化。具体表现为流体组分从基本上不含Ar、He及N2跳跃到富含Ar、但亏损He和N2。该异常发生在2004年9.3级苏门答腊地震前1个半小时。由于CCSD现场离苏门答腊地震震中距离大于4170公里,大于该地震破裂长度1200公理的3倍,该地震在CCSD现场产生的静态应力变化微乎其微,不足以导致CCSD现场深部岩石或封闭破裂的岩石物理性质剧烈变化,因而可以排除静态激发效应的作用。在我国的云南和广东等地所观测到的地震异常和地下水位变化等表明2004年苏门答腊地震的动态激发效应主要沿东北方向,这和大地震的动态激发具有方向性一致。而CCSD现场就位于该方向上。我们推测2004年苏门答腊地震所产生的面波在CCSD现场激发的动态效应,导致库仑型失稳,增进深部岩石或破裂带的渗透率,释放富含Ar但亏损He和N2的流体,产生CCSD所观测到的气体异常。     

胶东中生代构造体制转折过程中流体演化和金的大规模成矿

胶东是我国最大的金矿产出集中区,依据矿床和矿点的密集程度,可分为招远-莱州-平度、蓬莱-栖霞、牟平-乳山三个成矿带,区域内金矿类型可主要分为石英脉型和蚀变岩型。高精度的单矿物 Ar-Ar、Rb-Sr 同位素及热液锆石离子探针测年研究业已证买,金成矿的时代为120±10Ma,金矿床载金矿物-黄铁矿、矿石-黄铁矿石英脉、控矿围岩-花岗岩和变质岩等及伴生脉岩的 Sr-Nd 放射性同位素研究也证明,金成矿物质具有多源性,既来自于控矿围岩-花岗岩和变质岩,又来自于幔源的岩浆岩,流体包裹体研究表明,各类金矿具有一致的成矿流体介质条件,为低盐度 H_2O-CO_2-NaCl±CH_4流体,金成矿温度、压力条件近似,主成矿温度为170～335℃,成矿压力为70～250MPa。氢氧等稳定同位素结果表明,成矿流体可能来源于与金矿床伴生的基性幔源岩浆脱水形成的岩浆水,但在地壳浅部遭受到大气降水的混合。因此,胶东各类型金矿是在同一成矿背景下形成的矿床,与区域内中生代构造体制转折作用有关,也是中生代构造体制转折的表现形式之一。     

362℃和差异应力条件下硫化物在NaCl溶液中的再活化实验研究

红透山块状硫化物矿石主要成分为黄铁矿、磁黄铁矿、黄铜矿、闪锌矿和石英、角闪石、黑云母等脉石矿物。切成长40mm 直径17mm 的矿石圆柱用20wt%NaCl 溶液浸泡260小时后装入长江500型活塞-圆筒式三轴应力试验机,在362℃414MPa 围压下加1342MPa 轴压,13小时后于空气中自然冷却。实验后试样长度压缩为32.3mm,算得应变速率为4.1×10~(-6)/s。实验产物中出现大量垂直应力轴的松弛裂缝。黄铁矿强烈脆性破裂,而磁黄铁矿、黄铜矿和闪锌矿以塑性变形为主,局部也发生脆性破裂。再活化黄铁矿、磁黄铁矿和黄铜矿分别充填同种矿物的碎粒间隙。再活化产物也呈细脉穿插脆性变形的黄铁矿碎斑,细脉中以黄铜矿为主,其次是磁黄铁矿,有时含极少量闪锌矿,在磁黄铁矿、黄铜矿和闪锌矿的塑性变形区内,以及变形的石英和其它脉石矿物中均无再活化硫化物产出。实验结果表明在构造应力作用下强干性矿物和地质体容易发生脆性变形,从而为再活化成矿流体的运移和析出矿质提供通道和空间,而韧性变形区较难提供流体通道和矿质沉淀空间。所以,再活化成矿作用容易发生在脆性变形区和韧-脆性转换部位。原生矿石中的黄铜矿在实验条件下比其它三种硫化物更容易再活化。脆性变形的黄铜矿和黄铁矿比起其它矿物来更容易接受含铜流体的叠加,因此地层中的含铜黄铁矿矿胚层最容易受叠加流体作用而形成层控富矿床。     

大别山晓天—磨子潭断裂带石英脉流体包裹体的特征及其构造意义

晓天—磨子潭断裂流体包裹体的均一温度、盐度和捕俘压力研究结果表明:晓天—磨子潭断裂中石英脉中流体主要来自浅部,有多期次流体包裹体,流体包裹体的均一温度分为三个区间:140～180℃、190～240℃和270～340℃,反映了至少经历了三次强烈的流体活动。流体包裹体的盐度<10%,捕获压力<1.350×108Pa。总体上越靠近晓天—磨子潭断裂,包裹体的均一温度和盐度越高,捕获压力越大,局部地区的差异,能从断裂对流体控制上得到合理的解释;另外,流体包裹体的均一温度、盐度和捕获压力,在不同的显微构造,围岩性质、构造环境和时空范围中,发生不同的变化。一方面多次构造活动和热事件的驱动流体活动,另一方面流体的活动,降低了岩石脆—韧性变形的温压条件,促进了岩石的变形。     

Strike-slip fault bridge fluid pumping mechanism: insights from field-based palaeostress analysis and numerical modelling

We present a finite-element study of stress perturbation in evolving compressive and extensional strike-slip fault bridges. The results are compared with a fracture study of a compressive bridge at St Donats, UK. Horizontally interbedded calcareous mudstone and bioclastic calcilutite at St Donats have a distinct vertical permeability anisotropy. This sedimentary sequence behaves as a set of horizontal aquifers. The fluid flow in these aquifers is sensitive to mean stress gradients. Paleostress analysis of field fracture data, verified by finite-element modelling, indicates a rotation of σ₁ towards parallelism with boundary faults inside the growing compressive bridge. Boundary faults and bridge faults recorded numerous fluid flow events. The modelled mean stress pattern shows a regional maximum within the bridge and local maxima/minima pairs at boundary fault tips.Finite-element modelling of an extensional bridge indicates that σ₃ rotates towards parallelism with boundary faults. The mean stress pattern is similar to the pattern in compressive bridge but with maxima and minima locations interchanged. The stress patterns are reestablished by each stress build-up preceding the rupturation of the boundary faults throughout the development stages of strike-slip fault bridges. Mean stress gradients developed pre-failure control the fluid flow in fractures of the strike-slip fault system at and after the end of each stress build-up and the fluid flow in boundary faults post-failure. Fracture reactivation and new fracture generation within an evolving bridge is a process consisting of multiple successive events that retain the storage capacity of the bridge. Rupture and sealing of the main bounding-faults is a step-wise process that opens and closes fluid conduits between areas with different pressures.     

Evolution of fluids associated with metasedimentary sequences from Chaves (North Portugal)

In order to identify and characterise fluids associated with metamorphic rocks from the Chaves region (North Portugal), fluid inclusions were studied in quartz veinlets, concordant with the main foliation, in graphitic-rich and nongraphitic-rich lithologies from areas with distinct metamorphic grade. The study indicates multiple fluid circulation events with a variety of compositions, broadly within the C–H–O–N–salt system. Primary fluid inclusions in quartz contain low salinity aqueous–carbonic, H₂O–CH₄–N₂–NaCl fluids that were trapped near the peak of regional metamorphism, which occurred during or immediately after D2. The calculated P–T conditions for the western area of Chaves (CW) is P=300–350 MPa and T500 °C, and for the eastern area (CE), P=200–250 MPa and T=400–450 °C. A first generation of secondary fluid inclusions is restricted to discrete cracks at the grain boundaries of quartz and consists of low salinity aqueous–carbonic, H₂O–CO₂–CH₄–N₂–NaCl fluids. P–T conditions from the fluid inclusions indicate that they were trapped during a thermal event, probably related with the emplacement of the two-mica granites.

A second generation of secondary inclusions occurs in intergranular fractures and is characterised by two types of aqueous inclusions. One type is a low salinity, H₂O–NaCl fluid and the second consists of a high salinity, H₂O–NaCl–CaCl₂ fluid. These fluid inclusions are not related to the metamorphic process and have been trapped after D3 at relatively low P (hydrostatic)–T conditions (P<100 MPa and T<300 °C).

Both the early H₂O–CH₄–N₂–NaCl fluids in quartz from the graphitic-rich lithologies and the later H₂O–CO₂–CH₄–N₂–NaCl carbonic fluid in quartz from graphitic-rich and nongraphitic-rich lithologies seem to have a common origin and evolution. They have low salinity, probably resulting from connate waters that were diluted by the water released from mineral dehydration during metamorphism. Their main component is water, but the early H₂O–CH₄–N₂–NaCl fluids are enriched in CH₄ due to interaction with the C-rich host rocks.

From the early H₂O–CH₄–N₂–NaCl to the later aqueous–carbonic H₂O–CO₂–CH₄–N₂–NaCl fluids, there is an enrichment in CO₂ that is more significant for the fluids associated with nongraphitic-rich lithologies.

The aqueous–carbonic fluids, enriched in H₂O and CH₄, are primarily associated with graphitic-rich lithologies. However, the aqueous–carbonic CO₂-rich fluids were found in both graphitic and nongraphitic-rich units from both the CW and CE studied areas, which are of medium and low metamorphic grade, respectively.     

流体包裹体方法在油气源追踪对比中的应用——以四川盆地碳酸盐岩大型气田为例

本文运用流体包裹体方法，基于薄片观察和岩矿学研究，探讨了四川盆地碳酸盐岩大型气田的气源。首先对包裹体的生源属性、多期捕获和后生变化进行了精细的鉴别分析。在此基础上，通过成岩自生矿物微量元素、包裹体相组成、均一温度、初熔温度等参数鉴别多期演化的油气充注。通过烃类包裹体化学成分初步鉴别出煤成气和油型气。根据烃类包裹体的相组成鉴别有机质可能来源于腐泥型源岩还是腐殖型源岩。最后根据同期包裹体生物标志物确定某一期次的油气所对应的烃源层。结果表明研究成果符合地质实际，为传统的油气源追踪对比研究提供了一个重要有效的辅助方法。     

鄂尔多斯盆地中部奥陶系方解石脉中包裹体流体势研究

结合前人研究成果，归纳出了一种利用盐水包裹体均一温度与盐度确定流体势的方法，并对鄂尔多斯盆地中部气田奥陶系方解石脉中包裹体进行了流体势计算，推算出了古流体运移方向。     

云南兰坪-思茅盆地脉状铜矿床铅、硫同位素地球化学与成矿物质来源研究

云南兰坪-思茅盆地中一新生代砂页岩中赋存有许多脉状铜矿床。本文对盆地内从北至南三个典型脉状铜矿床(金满、水泄和白龙厂)进行了详细的铅、硫同位素研究，探讨了该类型矿床的成矿物质来源。分析表明。该类型矿床的铅同位素组成总体变化较小，且均位于上地壳铅演化线附近，说明成矿流体中铅具有稳定的上地壳来源。各矿床由于赋矿层位不同，矿石铅同位素组成表现出一定差异，如由兰坪盆地侏罗纪地层中的金满矿床到思茅盆地二叠纪地层中的白龙厂矿床，铅同位素比值(^207Pb/^204Pb)呈增高趋势，这表明这类矿床的铅主要来源于围岩地层，且地层越老，提供的铅就相对富含放射成因铅。矿床中脉石矿物重晶石、铁白云石等的锶同位素组成也表明，金满矿床成矿流体的^87Sr／^86Sr比值较高(0．70874—0．71232)，而白龙厂矿床的^87Sr／^86Sr比值较低(0．70829—0．70938)，接近于围岩灰岩的值(0．70755)。硫同位素研究表明，金满矿床中硫化物的δ^34S值变化最大，为-20．5‰- 7．0‰。水泄矿床中硫化物的δ^34S值变化最小，为-0．1‰- 4．2‰。而白龙厂矿床中硫化物的δ^34S值为-14．3‰--3．6‰。水泄和白龙厂矿床中重晶石的δ^34S值分别为 12．3‰- 19．0‰和 13．1‰，它们与盆地中蒸发岩层中石膏的δ^34S值( 10．8‰- 15．7‰)相近。分析表明，兰坪-思茅盆地中脉状铜矿的硫源主要来源于盆地热卤水萃取的地层中蒸发岩硫酸盐，它们通过有机质的热分解反应还原为沉淀硫化物所必需的低价硫。各矿床独特的硫同位素组成还表明它们的硫源受局部地层硫源和成矿流体物理化学性质所控制。本文提出大气降水起源的盆地热卤水通过对围岩中新生代地层的淋滤和萃取，获得了成矿所需的金属和硫，并在构造薄弱部位沉淀形成了本区的脉状铜矿床。