湘江下游河床沉积物元素地球化学背景值估算

本研究对湘江下游河床沉积物进行了元素地球化学分析,在认识沉积物元素地球化学特征、甄别人为源与自然源重金属的基础上,估算了沉积物的元素地球化学背景值。结果表明:SiO2、TiO2、Al2O3、Fe2O3、K2O等主量元素及V、Co、Cr、Ba、Sc、U、Sr、Ga、Ge、Rb、Nb、Y、REE等微量元素在沉积物中含量变化相对稳定(Cv<0.2),分布相对均匀,且富集不明显(EF<2.0,Sr明显亏损)。而MnO、MgO、CaO、Na2O、P2O5等主量元素,及Cd、Mn、Cu、Pb、Zn等重金属在沉积物中含量变化大(Cv>0.25),分布极不均匀,且沉积物中重金属明显富集(EF>2.0)。主成分及Pearson线性相关性分析显示,沉积物中不明显富集的微量元素主要赋存于难溶硅酸盐矿物相中,为自然源元素。而沉积物中显著富集的重金属主要赋存于铁—锰氧化物等矿物相中,为有人为源叠加的元素。故针对不同来源特征的元素用不同的方法进行了背景值计算,求得沉积物中47个元素的背景值。再利用元素比值等方法对所得背景值进行检验。结果表明,本文得到的湘江沉积物元素背景值合理,可用作流域沉积物重金属污染评价参考。     

库车坳陷克拉2气田异常流体压力演化史

根据克拉2气田现今实测地层压力分析了异常高压发育的特征,并通过流体包裹体测试求取包裹体形成时期的古压力。计算结果表明:下白垩统和古近系库姆格列木群砂岩储层在距今8～6Ma(康村组沉积期末)时,古压力系数大致为1.09～1.18,发育过剩压力为4.6～9.6MPa的异常高压。在此基础上,以古、今压力数据为约束条件,利用数值模拟技术定量恢复出下白垩统与侏罗系异常流体压力的演化历史。研究发现:下白垩统储层流体压力经历了沉积型异常流体压力形成发展(白垩纪-库车组沉积期末)和沉积型异常流体压力萎缩—构造挤压型异常流体压力孕育(库车组沉积期末至今)两个阶段。康村组沉积早期沉积型超压开始出现,库车组沉积期末达到顶峰,过剩压力达40～50MPa;此后,在沉积型超压萎缩—构造挤压型超压孕育过程的耦合下,过剩压力曾降至25～30MPa,更新世起超压略有升高。侏罗系流体压力演化较为简单,吉迪克组沉积期开始出现超压,至库车组沉积期末达到高峰,此后异常高压逐渐萎缩。在克拉2气田的主要成藏时期(距今3～1Ma),烃源岩较储层具有更高的异常压力,源—储压力差为10～30MPa。     

塔里木盆地喀什凹陷克拉托天然气来源分析及聚气特征

塔里木西南喀什凹陷的克拉托天然气主要表现为原油的溶解气或者湿气,甲烷含量为74.59%~85.58%,克4井和克30井天然气则为较干的湿气。克拉托天然气的δ¹³C₁值为-41.2‰~-40.6‰,δ¹³C₂值为-30.0‰~-27.4‰。气源对比表明克拉托天然气主要源自具有混源母质特征的中侏罗统湖相烃源岩,不同于源自石炭系烃源岩的阿克莫木天然气。喀什凹陷的中-下侏罗统烃源岩主要是由于新近系的巨厚沉积才从未成熟—低成熟阶段进入成熟—高成熟阶段,生成的油气在克拉托背斜圈闭中聚集,虽也属晚期成藏,却具有连续聚气的特征。上新世末期,喀什凹陷的周缘开始抬升,早期油气藏受到破坏,形成了现今的地表油气苗或油砂。     

Performance of pile-restrained flexible floating breakwaters

The overall performance of pile-restrained flexible floating breakwaters is investigated under the action of linear monochromatic incident waves in the frequency domain. The aforementioned floating breakwaters undergo only vertical structural deflections along their length and are held in place by means of vertical piles. The total number of degrees of freedom equals the six conventional body modes, when the breakwater moves as a rigid body, plus the extra bending modes. These bending modes are introduced to represent the structural deflections of the floating breakwater and are described by the Bernoulli–Euler flexible beam equation. The number of bending modes introduced is determined through an appropriate iterative procedure. The hydrostatic coefficients corresponding to the bending modes are also derived. The numerical analysis of the flexible floating breakwaters is based on a three-dimensional hydrodynamic formulation of the floating body. A parametric study is carried out for a wide range of structural stiffness parameters and wave headings, to investigate their effect on the performance of flexible floating breakwaters. Moreover, this performance is compared with that of the corresponding pile-restrained rigid floating breakwater. Results indicated that the degree of structural stiffness and the wave heading strongly affect the performance of flexible floating breakwaters. The existence of an “optimum” value of structural stiffness is demonstrated for the entire wave frequency range.     

A critical CAE analysis of the bottom shape of a multi stepped air cavity planing hull

One of the most important aspects, in the ACS and multi stepped hull design, is the choice of the geometrical shape of the cavity and the steps. In this article a complete experimental and numerical campaign on a multi stepped ACS has been carried out, varying the velocity and the air flow rate under the hull. The experimental tests have been conducted in an ITTC Towing Tank allowing to validate the numerical simulations obtained by means of a CFD U-RANSe (Unesteady Reynolds Averaged Navier-Stokes equations) code. The CFD setup is described in detail. From this campaign a critical analysis of the Froude number influence on the air cushion shape has been argued. The authors identified four different behaviours, from low to very high Froude numbers. The use of CFD has allowed to observe quantities of difficult evaluation by means of traditional experimental test, as e.g. the frictional component of the resistance, the airflow path lines and the volume of fraction in transversal and longitudinal sections. The results have been discussed.     

碳氮稳定同位素比值在潮间带大型底栖动物组织间差异性研究

近年来,稳定同位素技术已被广泛应用于食物网研究中。然而,生物样品取样部位对食物网构建的影响的研究相对少见。大型底栖动物作为潮间带食物网的重要组成部分,在食物网研究中有必要对其采样部位进行统一,以增加研究结果的准确性及可比较性。本研究选取黄河三角洲和烟台潮间带10种代表性的大型底栖动物,比较δ13C和δ15N在不同采样部位中的差异。结果显示,对于大多数底栖动物而言,采样部位将直接影响到δ13C和δ15N的测定结果。当底栖动物作为摄食者,需分析其食性和营养级时,应统一采用肌肉组织,如贝类的闭壳肌或足部肌肉,蟹类的鳌足肌肉,鱼类的背部肌肉;当底栖动物作为被摄食者,需分析次级消费者的食性和营养级时,除多毛类采用去除消化道内容物的体壁外,其他种类应选取整体（难以被消化的组织除外）,如贝类的软体部,蟹类肌肉与鳃等的混合组织。     

Interaction mechanisms among waves,currents and a submerged plate

Wave-induced loads on a submerged plate, representative of submerged breakwater, coastal-bridge deck and a certain type of wave energy converter, in a uniform current are investigated in this study using fully nonlinear numerical wave tanks (NWTs) based on potential flow theory. The coupling effect of wave and current is explored, and the underlying interaction mechanisms of the hydrodynamic forces are described. The presence of a background current modifies the frequency dispersion. It produces changes of the water-surface elevation, and also has an effect on wave-induced loads. Depending on the nonlinearity, higher harmonic wave components are generated above the submerged plate. These contribute to the wave forces. It is found that the horizontal and the vertical force, hence the moment, are affected in the opposite way by the currents. The Doppler shifted effect dominates the vertical force and the moment on the plate. Whereas, the Doppler shifted effect and the generation of higher wave harmonics play opposite roles on the horizontal forces. The contribution of 2^nd order harmonics is found to be up to 30% of the linear component. The current-induced drag force, represented by the advection term ρU∂φ/∂x in the pressure equation, is found to lead to a decrease in the moment for the most range of wavelengths considered, and an increase in the moment for a small range of longer waves.     

山东蓬莱地区侯格庄金矿床流体包裹体特征

侯格庄金矿床位于胶东栖(霞)-蓬(莱)金成矿带大柳行金矿田东南部。该文采用包裹体显微测温方法对金矿石中石英矿物内残留的流体包裹体进行研究,总结了金矿石石英矿物中的流体包裹体特征,并对该矿床成矿流体来源、矿床成因进行了研究。研究表明,该矿床石英矿物中流体包裹体以纯液包裹体为主,次为H_2O-CO_2气液两相包裹体及H_2O-CO_2三相包裹体,未见含子矿物包裹体。均一温度在109~396℃,盐度在2.9~22.44wt%NaCl,密度在0.64~1.06g/cm~3之间,估算成矿压力为128~340MPa,成矿深度约4.4~11.6km。该矿床至少经历了2个矿化期次,成矿流体为中低温、低盐度、低密度流体,流体来源于天水与岩浆水的混合产物,属中低温、中浅成热液矿床。     

闽西行洛坑钨矿流体演化过程与成矿机制:白钨矿原位微量元素、Sr同位素的制约

行洛坑钨矿位于武夷山成矿带中部,是该带目前规模最大的钨矿床.钨矿体主要产于强烈蚀变的似斑状黑云母花岗岩岩株顶部,发育细脉浸染状、网脉状及大脉状多种矿化类型,黑钨矿与白钨矿含量近1:1.关于矿床的流体演化过程与成矿机制目前仍不清楚,成因存在较大争议.本文在详细成矿阶段划分的基础上,对不同阶段产出的不同世代白钨矿开展了系统...     

喜马拉雅珠峰地区冬季大气气溶胶化学组分及光学特征

为了研究喜马拉雅山北坡冬季大气气溶胶化学组分、光学特征及来源,2017年11—12月在珠穆朗玛峰站(QOMS)共采集22个PM2.5样品.结果显示:PM2.5中包括水溶性离子(WSIs)、有机质(OM)、元素碳(EC)在内的所有检测成分,总质量浓度为(3.36±1.06)μg·m-3;有机碳(OC)、元素碳(EC)和水...