安徽铜陵胡村南铜钼矿床流体成矿过程

胡村南铜钼矿床是在安徽铜陵铜(金)矿集区中发现的第一个矽卡岩-斑岩复合型铜钼矿床,在长江中下游成矿带具有特殊性和典型性。文章对该矿床进行了矿床地质和流体包裹体研究,旨在查明该矿床的流体成矿过程。胡村南铜钼矿床流体成矿过程可以划分为高温气成热液期、中高温热液期和低温热液期3个成矿期。高温气成热液期发育钾长石化和矽卡岩化,中高温热液期发育绿泥石化、绿帘石化和绢云母化,而低温热液期主要发育碳酸盐化。其中,中高温热液期为主要矿化期,形成辉钼矿和黄铜矿等多种硫化物网脉。高温气成热液期矿物中发育富液相和含子晶多相包裹体,中高温热液期矿物中也主要发育富液相包裹体和含子晶多相包裹体,但可见少量的富气相包裹体,低温热液期矿物中只发育富液相包裹体。从高温气成热液期经中高温热液期到低温热液期,成矿流体均一温度从435℃以上,经203~458℃,降低到156~276℃;盐度w(NaCleq)从14.0%~64.9%,经4.6%~47.5%,降低到1.0%~15.5%。成矿流体在其演化过程中发生过不混溶作用和沸腾作用。不混溶作用发生在气成热液期,使成矿流体中的成矿元素大量富集。沸腾作用发生在中高温热液期,导致成矿流体中的成矿元素卸载而沉淀出大量金属硫化物。     

激光拉曼光谱法在单个流体包裹体研究中的应用进展

激光拉曼光谱法以其非破坏性、高灵敏度和高分辨率等特性,一直以来都是研究流体包裹体的重要方法之一。近年来,围绕激光拉曼光谱在流体包裹体中的应用而展开的研究主要集中在半定量-定量测试方面,即在准确定性的基础上,采用高斯-洛仑兹去卷积分峰、低温原位等定量方法获取流体包裹体的成分和含量,从而克服了激光拉曼光谱法应用于溶液中阳离子的定量分析的灵敏度、准确度较低的问题,不仅能获得流体包裹体中一些常温下不具拉曼活性的盐类物质拉曼特征峰信息,还能根据特征峰与浓度、内压之间的线性关系,进一步对盐度和压力等性质进行测定,从而拓展了激光拉曼光谱法在流体包裹体中的应用范围。本文对激光拉曼光谱法应用于分析流体包裹体成分、盐度、同位素和压力所取得的最新进展进行了评述,并认为随着分析测试技术的不断进步,激光拉曼光谱法未来的分析方向也将继续围绕多元复杂体系及其定量方面的研究展开。     

长岭凹陷深层天然气藏中CO_2及CH_4充注次序的流体包裹体证据

对长岭凹陷深层天然气藏储层——营城组火山岩中发育的流体包裹体进行了详细研究,结果表明在火山岩发育的石英、方解石细网脉中均存在较多的碳质流体包裹体,单个包裹体激光拉曼光谱分析结果表明其主要为CO2及CH4两种类型的碳质包裹体。其中方解石细网脉体中发育有原生及次生CH4包裹体,而含CO2包裹体多以原生包裹体产于石英细网脉中。很多含CO2包裹体的石英细脉中发现了含CH4包裹体的方解石脉体的角砾,这就表明石英细脉形成晚于方解石细脉。营城组火山岩储层中CO2及CH4包裹体的产状特征研究表明,松辽盆地深层天然气藏的形成系火山岩成岩后CO2及CH4等气体不同期次充注的结果,CH4气的充注时间早于CO2气,火山岩中发育的原生孔隙及次生裂隙为上述气体的充注和聚集提供了重要通道。     

金属矿床的成矿流体成分和流体包裹体

自然界中的成矿流体按其主要成分,可分为:(1)岩浆,即形成岩浆矿床的岩浆;(2)以H2O为主的流体(含Na Cl);(3)以CO2为主的流体。地壳中的流体类型很多,只有含一定金属元素含量的,并且达到一定浓度时才称为金属矿床的成矿流体。基于对矿床中流体包裹体和天然成矿流体中金属种类和含量的测定,这些金属矿床的成矿流体按金属元素含量可以分为五组,成矿流体可以来自岩浆、岩浆热液、大气降水、盆地卤水和变质流体等地质环境。     

滇西兰坪盆地茅草坪脉状Cu矿床流体包裹体和稳定同位素地球化学研究

兰坪盆地西缘发育一条重要的脉状Cu矿带,矿床的成矿流体来源一直存在较大的争议。本次研究对该矿带南段新发现的茅草坪矿床进行流体包裹体和H-O-C-S同位素研究,结合前人发表的该矿带矿床的同位素数据,探讨矿床成矿流体特征和来源。茅草坪矿床早(A1脉)、晚(A2脉)两期含矿石英脉中的流体包裹体均为含CO2盐水包裹体,可细分为含石盐子晶、富液相(水溶液相)、富气相(CO2相)包裹体等不同类型。根据流体包裹体的共生特点,将其划分为3组包裹体组合:(1)第I组,出现在A1脉石英中,为富液相(I-W型)、富气相(I-C型)和含石盐子晶(I-S型)包裹体共生;(2)第Ⅱ组,同样出现在A1脉石英中,为富液相(Ⅱ-W型)和富气相(Ⅱ-C型)包裹体共生;(3)第Ⅲ组,出现在A2脉石英中,为富液相(Ⅲ-W型)和富气相(Ⅲ-C型)包裹体共生。测温结果显示:I-S型包裹体均一温度在293~370℃之间,流体盐度为30.06%~39.76%Na Cleqv;Ⅱ-W型包裹体均一温度在302~490℃之间,流体盐度为1.23%~18.63%Na Cleqv;Ⅲ-W型包裹体均一温度在263~400℃之间,流体盐度为1.20%~11.34%Na Cleqv。同一组内,包裹体气/液相比高度变化,表明包裹体捕获时的流体呈不均一态,此时包裹体均一温度中低值部分近似代表该组包裹体真实的捕获温度。因此,从I组到Ⅲ组,包裹体分别捕获于280~320℃(I组、Ⅱ组)和260~280℃(Ⅲ组),结合盐度数据,反应初始成矿流体发生沸腾作用,伴随石盐子晶析出,流体盐度下降,随后温度降低。茅草坪矿床成矿流体富CO2的特点与区域内其他脉状Cu矿床一致,但盐度明显偏高。矿床热液石英的δDV-SMOW值变化在-94.6‰~-56.2‰之间,计算的流体的δ18OV-SMOW值集中在+8.1‰~+9.6‰之间,与区域其他脉状Cu矿床相似,数据主要落在原生岩浆水区域的下方,表明流体来源于岩浆水,但经历了开放系统下的脱气作用,没有盆地流体或大气降水的贡献;热液碳酸盐方解石的δ13CV-PDF值为-8.3‰~-2.4‰,δ18OV-SMOW值为14.46‰~16.63‰,与区域其他脉状Cu矿床的C-O同位素组成相似,但C同位素组成明显低于区域脉状Pb-Zn矿床(碳主要来自盆地流体溶解的碳酸盐岩);黄铜矿的δ34SV-CDT值变化于-6.4‰~-3.9‰之间,处于区域其他脉状Cu矿床的S同位素组成范围内,但区别于区域砂岩型Cu矿床(硫来自硫酸盐的细菌还原作用)。因此,推测矿床的CO2和硫可能也来自脱气的岩浆。茅草坪脉状Cu矿床成矿流体的研究表明:兰坪盆地西缘脉状Cu矿床成矿流体可能来自富CO2、经历脱气的岩浆水,没有大气降水和盆地卤水的参与。     

四川盆地东部三叠系嘉陵江组成盐期浓缩海水古温度及其意义

四川盆地东部嘉陵江组四段石盐岩中发育大量原生的单一液相包裹体,为揭示石盐结晶时古海水的温度,恢复早三叠世古气候提供了有利条件。本文在蒸发岩岩相学研究的基础上,对流体包裹体均一温度进行了测试。测温结果表明,石盐结晶时卤水的温度在17.7~63.5℃之间,与该地区碳酸盐岩氧同位素数据所反映的温度特征基本一致,说明早三叠世时海水具有较高的温度。这有利于古海水的强烈蒸发浓缩,为成钾奠定了良好的气候条件。     

古盐湖卤水温度对钾盐沉积的控制作用探讨

古盐湖卤水的温度对钾盐沉积的控制作用的定量研究是钾盐成矿机理分析的重点和难点。本文分析和测试陕北盐盆奥陶系马家沟组、四川盆地三叠系嘉陵江组、云南兰坪-思茅盆地白垩系及老挝沙空那空盆地白垩系等八个含盐系的石盐岩中的流体包裹体,并利用均一温度计算了古盐湖的蒸发速率。若以老挝白垩纪时盐湖的蒸发速率为标准值100,陕北奥陶纪、四川三叠纪、云南白垩纪的蒸发速率标准值分别为54、68和90,而目前在老挝和云南白垩系都找到了一定规模的钾盐矿,因此高温(气温及水温)是盐湖成钾的有利条件,在卤水演化成钾的过程中可以起到重要的"催化"作用。     

滇西北衙斑岩型金多金属矿床成矿流体特征及其演化

北衙超大型金多金属矿床位于扬子陆块西缘与三江特提斯造山带的结合部位。本文通过对北衙矿区内的斑岩体石英斑晶、斑岩型矿化、矽卡岩矿化中的矽卡岩及外围似层状热液型铅锌银矿化的岩(矿)石中发育的流体包裹体进行了系统研究,发现北衙矿区内主要发育CO2、富CO2、含CO2、含子矿物三相、富气相水溶液及气液两相水溶液包裹体六类流体包裹体;与斑岩型矿化有关的成矿流体为中-高温Na Cl-H2O-CO2体系热液,矽卡岩矿化相关成矿流体为一种高温的Na Cl-H2O及Na Cl-H2O-CO2体系热液,而外围似层状铅锌银矿化相关的成矿流体则为中温的Na Cl-H2O-CO2体系热液。对比分析表明,矽卡岩矿化中的矽卡岩矿物(以绿帘石类矿物为主)形成较早,其中发育富气相的流体包裹体,可以推断岩浆侵位后先分异出富水蒸气的流体,此后CO2才从成矿流体中大量分异。斑岩型矿化及外围地层中似层状铅锌银矿化脉体中发育的流体包裹体与斑岩体石英斑晶内发育的流体包裹体组合类型基本一致,表明成矿流体主要来自斑岩体结晶分异出的岩浆热液。流体包裹体研究表明,北衙金多金属矿区内的矽卡岩型(金铜铁)、斑岩型(铜金钼)及外围碳酸盐岩等地层中的似层状热液型(铅锌银)矿床系列为与富碱斑岩体侵位活动有关的,由岩浆分异热液并逐渐演化形成的斑岩型金-铁铜-铅锌(银)多金属成矿系统。     

Ore-forming Fluid Characteristics of the Saishitang Cu-polymetallic Deposit in Qinghai Province, China

Saishitang Cu-polymetallic deposit is located in the southeast section of Late Paleozoic arcfold in the southeastern margin of Qaidam platform. Accoring to the geological process of the deposit,four mineralization episodes were identified: melt/fluid coexisting period(O),skarn period(A),first sulfide period(B) and second sulfide period(C),and 10 stages were finally subdivided. Three types of inclusions were classified in seven stages,namely crystal bearing inclusions(type I),aqueous inclusions(type II) and pure liquid inclusions(type III). Type I and II inclusions were observed in stage O1,having homogenization temperature from 252 to 431°C,and salinities ranging from 24.3% to 48.0%. Type I inclusion was present in stage A1,having homogenization temperature from 506 to 548°C,and salinities ranging from 39.4% to 44.6%. In stage B1,type II and III inclusions were observed,with homogenization temperature concentrating between 300–400°C,and salinities from 0.4% to 4.3%. Type II inclusions were present in stage B2,with homogenization temperature varying from 403 to 550°C. In stage C1,type I and II inclusion commonly coexisted,and constituted a boiling inclusion group,having homogenization temperatures at 187–463°C,and salinities in a range of 29.4%–46.8% and 2.2%–11.0%. Type II and III inclusions were developed in stage C2,having homogenization temperature at 124–350°C,and salinities ranging between 1.6% and 15.4%. In stage C3,type II and III inclusions were presented,with a homogenization temperature range of 164–360°C,and salinities varying from 4.0% to 11.0%. The results of micro-thermal analysis show that fluids are characterized by high temperature and high salinity in stage O1 and A1,and experienced slight decrease in temperature and dramatic decrease in salinity in stage B1 and B2. In stage C1,the salinity of fluid increased greatly and a further decrease of temperature and salinity occurred in stage C2 and C3. Fluids boiled in stage C1. With calculated pressure of 22 MPa from the trapping temperature of 284–289°C,a mineralization depth of 2.2 km was inferred. Results of Laser Raman Spectroscopy show high density of H2 O,CH4 and CO2 were found as gas composition. H-O isotope study indicates the oreforming fluids were the mixture of magmatic water and meteoric water. Physicochemical parameters of fluids show oxygen and sulfur fugacity experienced a decrease,and redox state is weakly reducing. Along with fluid evolution,oxidation has increased slightly. Comprehensive analysis shows that melt exsolution occurred during the formation of quartz diorite and that metal elements existed and migrated in the form of chlorine complex. Immiscible fluid separation and boiling widely occurred after addition of new fluids,bringing about dissociation of chlorine-complex,resulting in a great deal of copper precipitation. In conclusion,Saishitang deposit,controlled by regional tectonics,is formed by metasomatism between highly fractionated mineralization rock body and wall rock,and belongs to banded skarn Cu-polymetallic deposit.     

Compositions and Pressure–Temperature Conditions of Metamorphic Fluids Overprinting the Talate VMS Pb–Zn Deposit, Southern Altay, China

The Talate Pb-Zn deposit,located in the east of the NW-SE extending Devonian Kelan volcanic-sedimentary basin of the southern Altaides,occurs in the metamorphic rock series of the upper second lithological section of the lower Devonian lower Kangbutiebao Formation(D_1k_1~2).The Pb-Zn orebodies are stratiform and overprinted by late sulfide—quartz veins.Two distinct mineralization periods were identified:a submarine volcanic sedimentary exhalation period and a metamorphic hydrothermal mineralization period.The metamorphic overprinting period can be further divided into two stages:an early stage characterized by bedding-parallel lentoid quartz veins developed in the chlorite schist and leptite of the ore-bearing horizon,and a late stage represented by pyritechalcopyrite-quartz veins crosscutting chlorite schist and leptite or the massive Pb-Zn ores.Fluid inclusions in the early metamorphic quartz veins are mainly CO_2-H_2O-NaCI and carbonic(CO_2±CH_4±N_2) inclusions with minor aqueous inclusions.The CO_2-H_2O-NaCl inclusions have homogenization temperatures of 294-368℃,T_(m,CO2) of-62.6 to-60.5℃,T_(h,CO2) of 7.7 to 29.6℃(homogenized into liquid),and salinities of 5.5-7.4 wt%NaCl eqv.The carbonic inclusions have T_(m,CO2)of-60.1 to-58.5℃,and T_(h,Co2) of-4.2 to 20.6℃.Fluid inclusions in late sulfide quartz veins are also dominated by CO_2-H_2O-NaCl and CO_2±CH_4 inclusions.The CO_2-H_2O-NaCl inclusions have T_(b,tot) of142 to 360℃,T_(m,CO2)of-66.0 to-56.6℃,T_(h,CO2) of-6.0 to 29.4℃(homogenized into liquid) and salinities of 2.4-16.5 wt%NaCl eqv.The carbonic inclusions have T_(m,Co2)of-61.5 to-57.3℃,and T_(h,CO2) of-27.0to 28.7℃.The aqueous inclusions(L-V) have T_(m,ice) of-9.8 to-1.3℃ and T_(h,tot) of 205 to 412℃.The P-T trapping conditions of CO_2-rich fluid inclusions(100-370 MPa,250-368℃) are comparable with the late- to post-regional metamorphism conditions.The CO_2-rich fluids,possibly derived from regional metamorphism,were involved in the reworking and metal enrichment of the primary ores.Based on these results,the Talate Pb-Zn deposit is classified as a VMS deposit modified by metamorphic fluids.The massive Pb-Zn ores with banded and breccia structures were developed in the early period of submarine volcanic sedimentary exhalation associated with an extensional subduction-related back-arc basin,and the quartz veins bearing polymetallic sulfides were formed in the late period of metamorphic hydrothermal superimposition related to the Permian-Triassic continental collision.