2D NUMERICAL SIMULATION OF FLOOD AND FLUVIAL PROCESS IN THE MEANDERING AND ISLAND-BRAIDED MIDDLE YANGTZE RIVER

The characteristics of water flow and sediment transport in a typical meandering and island-braided reach of the middle Yangtze River is investigated using a two-dimensional （2D） mathematical model. The major problems studied in the paper include the carrying capacity for suspended load, the incipient velocity and transport formula of non-uniform sediment, the thickness of the mixed layer on the riverbed, and the partitioning of bed load and suspended load. The model parameters are calibrated using extensive field data. Water surface profiles, distribution of flow velocities, riverbed deformation are verified with site measurements. The model is applied to a meandering and island-braided section of the Wakouzi-Majiazui reach in the middle Yangtze River, which is about 200 km downstream from the Three Gorges Dam, to study the training scheme of the navigation channels. The model predicts the processes of sediment deposition and fiver bed erosion, changes of flow stage and navigation conditions for the first 20 years of impoundment of the Three Gorges Project.     

Dynamic p-enrichment schemes for multicomponent reactive flows

We present a family of p-enrichment schemes. These schemes may be separated into two basic classes: the first, called fixed tolerance schemes, rely on setting global scalar tolerances on the local regularity of the solution, and the second, called dioristic schemes, rely on time-evolving bounds on the local variation in the solution. Each class of p-enrichment scheme is further divided into two basic types. The first type (the Type I schemes) enrich along lines of maximal variation, striving to enhance stable solutions in “areas of highest interest.” The second type (the Type II schemes) enrich along lines of maximal regularity in order to maximize the stability of the enrichment process. Each of these schemes are tested on three model systems. The first is an academic exact system where basic analysis is easily performed. Then we discuss a pair of application model problems arising in coastal hydrology. The first being a contaminant transport model, which addresses a declinature problem for a contaminant plume with respect to a bay inlet setting. And the second, a multicomponent chemically reactive flow model of estuary eutrophication arising in the Gulf of Mexico.     

垂直上升管中气液两相流电导波动信号的混沌特性分析

首先以Lorenz混沌方程产生的非线性时间序列为例,讨论了在不同时间序列长度下各种延迟时间算法对噪声的适用性.研究发现,采用C_C算法计算延迟时间的鲁棒性强.在此基础上,给出了垂直上升管中气水两相流电导波动信号混沌表征结果,发现在较低水相表观速度时,随着气相表观速度增加,泡状流及混状流动力学特性变得愈加复杂,而段塞流动力学特性受液相表观速度影响较大;在较高水相表观速度时,随着气相表观速度增加,当流型从泡状流向段塞流转变时,气液两相流动力学特性变得相对简单.但是,由于受液相湍流作用影响,段塞流的动力学特性表现出了涨落现象,呈现不稳定性,当流型从段塞流向混状流转变时,气液两相流动力学特性则变得愈加复杂.研究结果表明：基于电导波动信号的混沌分析可以较好地表征气液两相流流型变化,是理解流型转变机理及其动力学演变特性的有用工具.     

An evaluation of the health status of the Lavaca Bay, Texas ecosystem using Crassostrea virginica as the sentinel species

Locational risks for compromised ecosystem health for the eastern oysters (Crassostrea virginica) harvested from Lavaca Bay, Texas were estimated. Flow cytometric evaluation of variations in DNA content and the lysosomal destabilization assay were used for evaluation of genotoxicity and stress, respectively. Bayesian geo-statistical methods were utilized to estimate and evaluate spatial effects. For models with spatial risks, continuous surface maps of predicted parameter values were created to evaluate risk location. Lysosomal destabilization assay results were spatially oriented whereas flow cytometry results were fit best with the random effects model. While not spatially oriented, the highest levels of variations in DNA content were also present near industrial facilities. Locational risks of increased biomarkers of genotoxicity and stress in the eastern oyster (Crassostrea virginica) were increased with proximity to industrial facilities     

A heat perturbation flow meter for application in soft sediments

A prototype flow meter has been developed, based upon the heat perturbation principle, to monitor groundwater specific discharge in soft sediments. The device is designed for use in spatially intensive, long-term monitoring campaigns in remote or inconvenient locations, and is cheap, robust and capable of being logged automatically. The results of the laboratory tests indicate that the heat perturbation principle is suitable for determining the magnitude of specific discharge to a degree of accuracy that would be useful in practical applications in dynamic groundwater systems with rapidly changing flows of approximately 1 md⁻¹ or more and that the groundwater flow direction can generally be determined to a high level of precision. The accuracy and reliability of the estimates of specific discharge have been shown to depend strongly upon the geometrical precision of manufacture and the quality of the temperature monitoring system. These factors become most significant in the estimation of lower flows and further investigation is required to determine the detection limit of the device. Specific discharge estimates have been shown to be insensitive to dispersivity values appropriate to the scale of the device. Unlike the majority of heat perturbation devices, calibration is unnecessary.     

Seepage driving effect on deformations of San Fernando dams

In the process of flow deformation of an earth dam, the seepage force inside the dam plays a role as a driving force. The seepage force acts just like the gravitational force in terms of pushing soils away from their original locations after liquefaction is triggered. This paper draws attention to this seepage driving effect by presenting a set of fully coupled finite element analyses on the well-known San Fernando dams, with the objective of evaluating the impact of this seepage effect. The results indicate that while this effect is always there, its practical significance depends on a number of factors. In the case of the upper San Fernando dam, which experienced a significant, but restricted, downstream movement during the 1971 earthquake, the seepage driving effect was indeed significant. On the contrary, for the lower dam, which failed and slid into the upstream reservoir during the same earthquake, this seepage effect was relatively less pronounced. The detailed results of the analyses reveal the likely mechanisms of failure and deformation of the two dams and the likely cause behind the difference between their responses during the earthquake.     

Influence of shallowness,bank inclination and bank roughness on the variability of flow patterns and boundary shear stress due to secondary currents in straight open-channels

Boundary shear stress and flow variability due to its interaction with main flow and secondary currents were investigated under conditions that extend previous research on trapezoidal channels. Secondary currents that scale with the flow depth were found over the entire width in all experiments. These findings contradict the widespread perception that secondary currents die out at a distance of 2.5 times the flow depth from the bank, a perception which is largely based on experiments with smooth boundaries. The reported results indicate that a stable pattern of secondary currents over the entire channel width can only be sustained over a fixed horizontal bed if the bed's roughness is sufficient to provide the required transverse oscillations in the turbulent shear stresses. Contrary to laboratory flumes, alluvial river bed always provide sufficient roughness. The required external forcing of this hydrodynamic instability mechanism is provided by the turbulence-generated near-bank secondary currents. The pattern of near-bank secondary currents depends on the inclination and the roughness of the bank. In all configurations, secondary currents result in a reduction of the bed shear stress in the vicinity of the bank and a heterogeneous bank shear stress that reaches a maximum close to the toe of the bank. Moreover, these currents cause transverse variability of 10–15% for the streamwise velocities and 0.2u_*²–0.3u_*?² for the bed shear stress. These variations are insufficient to provide the flow variability required in river restoration projects, but nevertheless must be accounted for in the design of stable channels.     

台湾岛对气流扰动的影响

本文根据一个三维气流过山的模型,用数值快速傅里叶变换方法,讨论理想东北季风气流经过台湾岛产生的扰动气压场、扰动垂直速度场和水平流场.经与实际东北季风下台湾岛的气候特征进行比较,结果令人满意.     

高温高压岩石力学—历史,现状,展望

高温高压岩石力学是岩石力学的分支学科，它以固体地球介质（材料）的变形行为和机制为研究对象，与一般变形固体力学相比较，具有高温、高压、强约束、宽时域、大变形、以及固－液相互作用、物理效应－化学效应并存等特点。高温高压岩石力学是在经典连续介质力学的基础上，针对自身的特殊性，运用破裂学、摩擦学和流变学的研究成果，经过相当长时期的酝酿和积累，大致于本世纪七十年代建立并逐步发展起来的。它在岩石破裂、摩质力学     

小流域水沙耦合模拟概念模型*

小流域水沙耦合模拟概念模型,采用文献[1]、[2]和[4]中提出的概念性坡面产沙、沟蚀产沙、坡面汇沙、沟道汇沙和格林-安普特下渗曲线结构,结合水文学中的概念性汇流计算方法,构成了一个完整的、具有明确物理意义的流域水流、泥沙耦合模拟模型.该模型结构简单,经子洲试验站团山沟三试验场和蛇家沟、团山沟、水旺沟三试验小流域实测资料的模拟检查表明,模型结构合理、效果较好,适合于黄土地区流域.