流动注射分光光度法同时测定水中挥发酚及氰化物

在单针进样器的基础上，增加一个三通流路同时进样，在线消解-流动注射分光光度法测定水中挥发酚及氰化物。实验结果表明，挥发酚浓度在0mg/L～0．2mg／L、氰化物浓度在0mg/L～0．5mg／L范围内具有良好的线性关系。通过在线气体扩散分离技术，提高了分析速度，每小时可完成12个～15个样品的分析。方法的相对标准偏差〈5％，回收率在90．4％～108．5％之间。     

Modeling forced pool–riffle hydraulics in a boulder-bed stream, southern California

The mechanisms which control the formation and maintenance of pool–riffles are fundamental aspects of channel form and process. Most of the previous investigations on pool–riffle sequences have focused on alluvial rivers, and relatively few exist on the maintenance of these bedforms in boulder-bed channels. Here, we use a high-resolution two-dimensional flow model to investigate the interactions among large roughness elements, channel hydraulics, and the maintenance of a forced pool–riffle sequence in a boulder-bed stream. Model output indicates that at low discharge, a peak zone of shear stress and velocity occurs over the riffle. At or near bankfull discharge, the peak in velocity and shear stress is found at the pool head because of strong flow convergence created by large roughness elements. The strength of flow convergence is enhanced during model simulations of bankfull flow, resulting in a narrow, high velocity core that is translated through the pool head and pool center. The jet is strengthened by a backwater effect upstream of the constriction and the development of an eddy zone on the lee side of the boulder. The extent of flow convergence and divergence is quantified by identifying the effective width, defined here as the width which conveys 90% of the highest modeled velocities. At low flow, the ratio of effective width between the pool and riffle is roughly 1:1, indicating little flow convergence or divergence. At bankfull discharge, the ratio of effective width is approximately 1:3 between the pool and downstream riffle, illustrating the strong flow convergence at the pool head. The effective width tends to equalize again with a ratio of 1:1 between the pool and riffle during a modeled discharge of a five-year flood, as the large roughness elements above the pool become drowned out. Results suggest that forced pool–riffle sequences in boulder-bed streams are maintained by flows at or near bankfull discharge because of stage-dependent variability in depth-averaged velocity and tractive force.     

EXPERIMENTS ON FLOW AROUND A CYLINDER IN A SCOURED CHANNEL BED

The flow pattern around a cylinder, installed in a scoured channel bed, was experimentally investigated. Detailed measurements of the instantaneous 3D velocities were performed by using an Acoustic Doppler Velocity Profiler (ADVP), from which the profiles of the time-averaged velocities and turbulence stresses were obtained. It is shown that the influence of the cylinder and of the scour hole alters the approach flow; this is essentially confined to the vicinity of the cylinder and to the inside of the scour hole. The horseshoe vortex is measured as a flow reversal inside the scour hole, formed by the downward flow along the cylinder face and the reversed flow at the scour bed.     

A SIMPLIFIED APPROACH TO MODELING 3D SEDIMENT-LADEN TURBULENT FLOWS

ＡＳＩＭＰＬＩＦＩＥＤＡＰＰＲＯＡＣＨＴＯＭＯＤＥＬＩＮＧ３ＤＳＥＤＩＭＥＮＴ－ＬＡＤＥＮＴＵＲＢＵＬＥＮＴＦＬＯＷＳＤｏｎｇｈｕｏＺＨＯＵａｎｄＳａｍＳ．Ｙ．ＷＡＮＧＡｂｓｔｒａｃｔ：Ａ３－ｄｎｕｍｅｒｉｃａｌｍｏｄｅｌｆｏｒｓｉｍｕｌａｔｉｎｇｓ...     

计算机辅助绘制流域等流时线

采用地理信息系统方法，对流域的地形地貌特征进行分析，模拟水质点在流域上的运动轨迹，并根据水质点汇流时间与汇流路径，坡度，坡长的关系，建立了流域汇流等流时线模型，经实例验证，效果较好。     

WINDOW FACTOR ANALYSIS:THEORETICAL DERIVATION AND APPLICATION TO FLOW INJECTION ANALYSIS DATA

Window factor analysis(WFA)is a self-modeling method for extracting the concentration profiles ofindividual components from evolutionary processes such as flow injection,chromatography,titrationsand reaction kinetics.The method takes advantage of the fact that each component lies in a specificregion along the evolutionary axis,called the‘window’.Theoretical equations are derived.The methodis used to extract the concentration profiles and spectra of seven bismuth species from data obtained byGemperline and Hamilton,who injected bismuth perchlorate into a flowing stream of hydrochloric acid.     

江西省大地热流与铀矿关系的初步研究

本文根据江西省大地构造、铀矿分布和大地热流实测资料,证明大地热流异常和铀矿均受深大断裂和深部构造变异带的控制,铀矿化能在一定程度上引起热流异常,并据此初步探讨了根据大地热流异常寻找铀矿床的可能性。     

Influence of rainfall on the deformation and stability of a slope in overconsolidated clays: a case study

The behaviour of an instrumented unstable slope in a profile of weathered overconsolidated clay has been analysed. Available field investigation data and laboratory tests were integrated in a coupled hydromechanical model of the slope. Particular attention was given to the unsaturated soil conditions above the water table and to the influence of the rainfall record. Recorded pore-water pressures helped to identify the hydrogeological conditions of the slope. The coupled model was used to compute slope deformations and the variation of safety with time. Actual rainfall records were also integrated into the analysis. Comparison of measurements and calculations illustrate the nature of the slope instability and the complex relationships between mechanical and hydraulic factors. Electronic Publication     

Damage process of pile foundation in liquefied ground during strong ground motion

The 1995 Hyogoken–Nambu earthquake caused severe liquefaction over wide areas of reclaimed land. Furthermore, the liquefaction induced large ground displacement in horizontal directions, which caused serious damage to foundations of structures. However, few analyses of steel pipe piles based on field investigation have so far been conducted to identify the causes and process of such damage. The authors conducted a soil–pile-structure interaction analysis by applying a multi-lumped-mass-spring model to a steel pipe pile foundation structure to evaluate the causes and process of its damage. The damage process analyzed in the time domain corresponded well with the results of detailed field investigation. It was found that a large bending moment beyond the ultimate plastic moment of the pile foundation structure was induced mainly by the large ground displacement caused by liquefaction before lateral spreading of the ground and that the displacement appeared during the accumulating process of the excess pore water pressure.