Plastic flow strength of jadeite and diopside investigated by microindentation hardness tests

Microindentation hardness tests were performed on jadeite and diopside, being end members of the omphacite solid solution series. At temperatures between 300 and 750 °C, the hardness of jadeite ranges from 7.4 to 8.5 GPa, that of diopside from 4.9 to 6.1 GPa. Jadeite is significantly stronger than diopside in the low-temperature plasticity regime. Normalization of the hardness-derived yield stress with respect to the shear modulus considerably reduces the strength contrast. The normalized Peierls stress is identical for jadeite and diopside. This indicates that jadeite and diopside belong to the same isomechanical group. The hardness-derived yield stress for jadeite as well as for diopside is used to estimate flow law parameters for the low-temperature plasticity regime.     

Dynamics of an active rock glacier (Ötztal Alps, Austria)

The rock glacier Innere Ölgrube, located in a small side valley of the Kauner Valley (Ötztal Alps, Austria), consists of two separate, tongue-shaped rock glaciers lying next to each other. Investigations indicate that both rock glaciers contain a core of massive ice. During winter, the temperature at the base of the snow cover (BTS) is significantly lower at the active rock glacier than on permafrost-free ground adjacent to the rock glacier. Discharge is characterized by strong seasonal and diurnal variations, and is strongly controlled by the local weather conditions. Water temperature of the rock glacier springs remains constantly low, mostly below 1°C during the whole melt season. The morphology of the rock glaciers and the presence of meltwater lakes in their rooting zones as well as the high surface flow velocities of >1 m/yr point to a glacial origin. The northern rock glacier, which is bounded by lateral moraines, evolved from the debris-covered tongue of a small glacier of the Little Ice Age with its last highstand around A.D. 1850. Due to the global warming in the following decades, the upper parts of the steep and debris-free ice glacier melted, whereas the debris-covered glacier tongue transformed into an active rock glacier. Due to this evolution and due to the downslope movement, the northern rock glacier, although still active, at present is cut off from its ice and debris supply. The southern rock glacier has developed approximately during the same period from a debris-covered cirque glacier at the foot of the Wannetspitze massif.     

昆明市东川区泥石流信息系统的建立及其应用

根据东川区泥石流的成因、泥石流灾害信息源、各类数据的表达方式及泥石流信息系统的应用等，对东川区泥石流信息系统进行了系统分析，在此基础上利用3S技术，在ARCVIEW的AVENUE开发语言支持下，集成各类数据，建立东川区泥石流信息系统，最后讨论了该系统在泥石流危险度区划及灾害趋势分析中的应用。     

Signatures in flowing fluid electric conductivity logs

Flowing fluid electric conductivity logging provides a means to determine hydrologic properties of fractures, fracture zones, or other permeable layers intersecting a borehole in saturated rock. The method involves analyzing the time-evolution of fluid electric conductivity (FEC) logs obtained while the well is being pumped and yields information on the location, hydraulic transmissivity, and salinity of permeable layers. The original analysis method was restricted to the case in which flows from the permeable layers or fractures were directed into the borehole (inflow). Recently, the method was adapted to permit treatment of both inflow and outflow, including analysis of natural regional flow in the permeable layer. A numerical model simulates flow and transport in the wellbore during flowing FEC logging, and fracture properties are determined by optimizing the match between simulation results and observed FEC logs. This can be a laborious trial-and-error procedure, especially when both inflow and outflow points are present. Improved analyses methods are needed. One possible tactic would be to develop an automated inverse method, but this paper takes a more elementary approach and focuses on identifying the signatures that various inflow and outflow features create in flowing FEC logs. The physical insight obtained provides a basis for more efficient analysis of these logs, both for the present trial and error approach and for a potential future automated inverse approach. Inflow points produce distinctive signatures in the FEC logs themselves, enabling the determination of location, inflow rate, and ion concentration. Identifying outflow locations and flow rates typically requires a more complicated integral method, which is also presented in this paper.     

云南省鹤庆盆地2.78Ma以来的环境演化

通过构建于新沂河河漫滩上的表面流人工温地系统处理污染河水的现场中试研究表明,在CODMn和NH4 -N进水浓度分别为11．69-60．00 mg／L和1．37-20．18 mg／L时,种植千屈菜、美人蕉、香蒲、水葱4种不同植物的表面流人工湿地系统,对CODMn的平均去除效率分别为26．44％、40．12％、46．71％、28．23％,对NH4 -N的平均去除效率分别为64．27％、70．49％、66．78％、58．52％,其中香蒲和美人蕉的净化能力较强．4种植物中水葱的耐淹能力最强,在完全淹水达22 d以上时,水葱依然生长良好;千屈菜的耐淹能力最弱,在完全淹水7 d后就开始枯萎,淹水17 d后地上、地下部分全部死亡．     

酉阳河流域典型年汛期的基流分割研究

基流分割是水文学研究中的重难点问题之一,目前基流分割也存在许多方法.基于酉阳河典型年汛期实测日平均流量资料,分别采用Chapman-Maxwell改进方程数字滤波法一次滤波(参数N=1)以及二次滤波(参数N=2)、BFI(f)法、HYSEP固定步长法、HYSEP滑动步长法、HYSEP局部最小值法进行基流分割并对其结果进...     

A two-dimensional analytical model of vertical water entry for asymmetric bodies with flow separation

The vertical water entry of asymmetric two-dimensional bodies with flow separation is considered. As long as there is no flow separation, linearised Wagner's theory combined with the modified Logvinovich model has been shown to provide computationally fast and reliable estimates of slamming loads during water entry. Tassin et al. [11] introduced the fictitious body continuation (FBC) concept as a way to extend the use of Wagner's model to separated flow configurations, but they only considered symmetric bodies. In the present study, we investigate the ability of the FBC concept to provide accurate estimates of slamming loads for asymmetric bodies. In this case, flow separation may not occur simultaneously on both sides of the body. During an intermediate phase, slamming loads are governed by a competition between the local drop in pressure due to partial flow separation and the ongoing expansion of the wetted area. As a first benchmark for the model, we consider the water entry of an inclined flat plate and compare the FBC estimates with the results of a nonlinear model. Then, we consider the case of a foil and compare the FBC results with computational fluid dynamics predictions. In both cases, we find that the FBC model is able to provide reliable estimates of the slamming loads.     

Impact of missing flow on active inundation areas and transformation of parafluvial wetlands in Punarbhaba–Tangon river basin of Indo-Bangladesh

Punarbhaba river of Indo-Bangladesh has experienced hydro-ecological alteration after installation of Komardanga dam in 1992 and consequently wetland and inundation areas have undergone into transformation. The present work intends to explore the impact of flow attenuation on contemporary and upcoming flood extent and flood plain wetlands. In post-dam condition, average and maximum flows are attenuated by 36 and 41%, respectively, and as a result the active flood prone area is squeezed considerably by 39.72%. Average flood water depth is also reduced by 37.87% (4.45metre) after flow modification. Due to shrinkages of flood prone areas, wetland area is also reduced from 215.70 to 90.40 km² and larger part of the present wetland area is under stress and critical state. Predicted flood prone areas in next 25 years will be 328.91 km² and consequently 65.63 km² wetland areas may further be under hydro-ecological threats. Release of ecological flow is essential to restore and preserve the wetland.     

Regional hydrologic mapping of flows in stream networks

River low flow (LF) is an important hydrological characteristic used in management of the quantity and quality of water resources. A common way to transpose at-station low flow quantiles to ungaged locations involves development of regional multivariate regression models. In site selection studies of water control facilities, need arises to automate the mapping of LF characteristics onto the stream network in a continuous manner. This would allow estimation of LF at any desired ungaged location. A mapping algorithm is introduced that determines the value of regression model's independent variables (input components) over the drainage area of each stream pixel and calculates the flow (output). The mapping algorithm relies mainly on the digital elevation model (DEM) and its derivatives, such as flow direction and flow accumulation. Furthermore, the contribution of each independent variable of the regional model to the total flow may be plotted to represent the flow profiles along the streams. A case study involving LF mapping in rivers of Gilan province, Iran, where LF quantiles are required for issuing water withdrawal permits as well as maintaining water quality standards, is also described in the paper. Overall, the maps and profiles of flow statistics in the region of interest provide convenient visualization and assessment tools for water resource and environmental engineers. The transposition algorithm may also be applied in regional mapping of other flow characteristics such as flood or average flows.     

Numerical flow and performance analysis of a water-jet axial flow pump

The purpose of the present study is to investigate the performance and three-dimensional flow fields in a water-jet pump. TASCflow is employed to simulate the rotator-stator coupling flow field. A standard k-ε turbulence model combined with standard wall functions is used. In order to investigate the effect of a rear stator on flow fields, the flows in two water-jet pumps with and without a rear stator are studied. Computational fluid dynamics (CFD)-predicted overall performances are in good agreement with the experimental results. Then the flow fields, such as the pressure distribution on the blade surfaces, and the axial and tangential velocity distribution, especially the radial loading distribution, are investigated at different flow rates. In addition, the effects of a rear stator and different spacings between the rotor and the stator on the overall performance and the flow fields of the water-jet pump are also investigated.