A SIMPLIFIED APPROACH TO MODELING 3D SEDIMENT-LADEN TURBULENT FLOWS

ＡＳＩＭＰＬＩＦＩＥＤＡＰＰＲＯＡＣＨＴＯＭＯＤＥＬＩＮＧ３ＤＳＥＤＩＭＥＮＴ－ＬＡＤＥＮＴＵＲＢＵＬＥＮＴＦＬＯＷＳＤｏｎｇｈｕｏＺＨＯＵａｎｄＳａｍＳ．Ｙ．ＷＡＮＧＡｂｓｔｒａｃｔ：Ａ３－ｄｎｕｍｅｒｉｃａｌｍｏｄｅｌｆｏｒｓｉｍｕｌａｔｉｎｇｓ...     

Research on Migration Features of Ammonia-Nitrogen in Shallow Groundwater of Coastal Area of Tangshan Fengnan

The ammonia-nitrogen in shallow groundwater of coastal area of Tangshan Fengnan exceeds the content limit at varying degrees. To analyze the the migration features of ammonia-nitrogen in the groundwater, a two-dimensional groundwater flow and quality model has been established on the basis of investigation and analysis of hydeogeological conditions in this region. Ammonia-nitrogen in the first aquifer groundwater migrates slowly and is difficult to diffuse during the migration process for the low exploitation, the small hydraulic gradient, the relatively fine aquier rock particles and poor permeability of the aquifer     

三峡水库蓄水前后长江中下游流量频率分布特征及其对洪水造床作用的影响

三峡水库蓄水前后长江中下游流量特征变化及其对造床作用的影响一直受到学者的关注.采用枝城等6个水文站日均流量资料,分别统计了各站流量的经验频率分布,检验了8种概率密度函数的适用性,并讨论了三峡水库蓄水前后流量频率分布特征与造床流量的关系.研究表明:长江中下游干流洪中枯各级流量的频率分布具有分段特性,无法用皮尔逊Ⅲ型或对数...     

Numerical flow and performance analysis of a water-jet axial flow pump

The purpose of the present study is to investigate the performance and three-dimensional flow fields in a water-jet pump. TASCflow is employed to simulate the rotator-stator coupling flow field. A standard k-ε turbulence model combined with standard wall functions is used. In order to investigate the effect of a rear stator on flow fields, the flows in two water-jet pumps with and without a rear stator are studied. Computational fluid dynamics (CFD)-predicted overall performances are in good agreement with the experimental results. Then the flow fields, such as the pressure distribution on the blade surfaces, and the axial and tangential velocity distribution, especially the radial loading distribution, are investigated at different flow rates. In addition, the effects of a rear stator and different spacings between the rotor and the stator on the overall performance and the flow fields of the water-jet pump are also investigated.     

A two-dimensional analytical model of vertical water entry for asymmetric bodies with flow separation

The vertical water entry of asymmetric two-dimensional bodies with flow separation is considered. As long as there is no flow separation, linearised Wagner's theory combined with the modified Logvinovich model has been shown to provide computationally fast and reliable estimates of slamming loads during water entry. Tassin et al. [11] introduced the fictitious body continuation (FBC) concept as a way to extend the use of Wagner's model to separated flow configurations, but they only considered symmetric bodies. In the present study, we investigate the ability of the FBC concept to provide accurate estimates of slamming loads for asymmetric bodies. In this case, flow separation may not occur simultaneously on both sides of the body. During an intermediate phase, slamming loads are governed by a competition between the local drop in pressure due to partial flow separation and the ongoing expansion of the wetted area. As a first benchmark for the model, we consider the water entry of an inclined flat plate and compare the FBC estimates with the results of a nonlinear model. Then, we consider the case of a foil and compare the FBC results with computational fluid dynamics predictions. In both cases, we find that the FBC model is able to provide reliable estimates of the slamming loads.     

云南省鹤庆盆地2.78Ma以来的环境演化

通过构建于新沂河河漫滩上的表面流人工温地系统处理污染河水的现场中试研究表明,在CODMn和NH4 -N进水浓度分别为11．69-60．00 mg／L和1．37-20．18 mg／L时,种植千屈菜、美人蕉、香蒲、水葱4种不同植物的表面流人工湿地系统,对CODMn的平均去除效率分别为26．44％、40．12％、46．71％、28．23％,对NH4 -N的平均去除效率分别为64．27％、70．49％、66．78％、58．52％,其中香蒲和美人蕉的净化能力较强．4种植物中水葱的耐淹能力最强,在完全淹水达22 d以上时,水葱依然生长良好;千屈菜的耐淹能力最弱,在完全淹水7 d后就开始枯萎,淹水17 d后地上、地下部分全部死亡．     

油井产液量与井底压力关系的研究

利用流体动力学理论,研究了油井产量与井口压力、井底压力之间的产量关系,给出了井口压力和油井产液量之间的等效互换关系,进一步研究了油井动态观测资料的科学处理方法,以胜利油田东水－３井为例,对其观测资料进行了处理,并讨论了泄流管管径对流量及等效水位的影响。     

对转压气机三维掠动叶优化设计

为探索三维掠动叶降低对转压气机二次流损失的潜力,进一步提高对转压气机气动性能,基于近似函数与遗传算法,针对某对转压气机双排转子在整机环境下进行三维掠动叶优化设计,并对优化前后流场进行对比分析。优化成功的得到了双排“S”形掠动叶,结果表明:三维掠动叶有效改善了双排动叶吸力面径向二次流,减小了吸力面低速区,提高了对转压气机性能,优化工况点整机效率提高0.6%,全工况范围内效率均有所提高;三维掠动叶提高对转压气机效率的根本原因是其对径向负荷分配的重新调整,将叶展下方流动较差区域负荷移至叶展上方,改善流场的同时保证对转压气机负荷不变。      

X-ray CT and hydraulic evidence for a relationship between fracture conductivity and adjacent matrix porosity

Multi-phase flow in fractured rocks plays an important role in any hydrocarbon recovery process, be it for environmental remediation or natural oil and gas extraction. Fractures may form the primary production conduits, and the mass transport at the fracture interfaces with the matrix determines the effectiveness of extraction processes. This paper presents specific evidence for a relationship between fracture apertures and the porosity of the adjoining perpendicular layers in Berea sandstone samples. Measurements of fracture apertures were done with high-resolution Micro-Computed Tomography (MCT) with a voxel resolution of about 0.05 mm in three dimensions. Multi-phase fluid flow experiments were done using a medical CT scanner with a voxel resolution of about 1.00 × 0.25 × 0.25 mm. MCT evidence shows a correlation between aperture and the porosity of the intersected layers. The comparison was made by generating two-dimensional maps of matrix porosity and CT values adjacent to the fracture and of the corresponding fracture apertures. High-porosity layers are lined up with large fracture apertures. Multi-phase fluid experiments provided hydraulic evidence that the high-porosity layers have high permeability. Oil injection into a water-saturated sample was tracked by a sequence of transverse scans near the downstream tip of a fracture. The hydraulic evidence from the two-phase flow experiments also confirms high permeability in fracture strips adjacent to high-porosity and high-permeability layers. The reasons for the relationship between fracture aperture and the properties of the adjacent layers are not fully understood. Some explanation for the physical and hydraulic observations rests in the method of fracturing, fracture propagation, and the lithological characteristics of the rock.