应用小波变换与二维分形技术预测奥灰裂隙发育带

以许厂煤矿的应用为例，介绍了小波变换和二维分形技术的基本理论以及预测奥灰裂隙发育带的方法、步骤及效果。理论与实际分析表明，在预测奥灰裂隙发育带中，小波变换可以提高地震资料的分辨率和信噪比，二维分形参数有很高的参考价值，二者的结合为预测奥灰裂隙发育提供了一种有效的方法。     

层间剪切带粒度分形几何特征及工程地质意义

本文对分形几何方法表征土的粒度组成加以了补充, 并用它来描述和表征层间剪切带的粒度组成, 据此将其划分为五个类型。在此基础上较为深入地阐述了其工程地质意义, 并着重讨论了用它来识别层间剪切带所遭受的构造变形破坏程度、演化阶段问题等。     

High resolution vertical distribution of the copepod Calanus chilensis in relation to the shallow oxygen minimum zone off northern Peru using LOKI,a new plankton imaging system

The vertical distribution of copepodite stage V and adult Calanus chilensis was studied on two transects across the Humboldt Current System off northern Peru using the LOKI system. LOKI is an optical plankton recorder, which simultaneously collects images of zooplankton and environmental data such as temperature, salinity, oxygen, and fluorescence. Image quality allowed determination of CV, females and males and identification of C. chilensis from 3 co-occurring Calanid copepods. C. chilensis was inhabiting the upper 250 m. Highest abundances with a maximum of ca. 44.000 Ind. m⁻² were observed in a narrow band within Cold Coastal Water at stations closest to the coast, coinciding with the Poleward Undercurrent. This raises questions for the life cycle closure within the Humboldt Current system. In contrast to observations in the southern part of the Humboldt Current System, the three stages studied were most abundant in hypoxic waters at oxygen concentrations between 5 and 50 µM. Thus C. chilensis seems to be the only species of the family Calanidae where not only a resting stage can tolerate hypoxia, but also both adult stages. This impacts availability to predators, as despite a locally high biomass only part of the population is available to anchovy and other important fish species which are restricted to waters with higher oxygen concentrations.     

Transposed high-pressure granulite fabrics (Cabo Ortegal, NW Spain): Implications on the scales of deformation localization

High-pressure granulite facies rocks of the Bacariza Formation (Cabo Ortegal, NW Spain) were syn-metamorphically deformed at the contacts with the bounding units (peridotite and eclogite massifs). This enabled the formation of meter-thick, spectacular shear zones with reworked and transposed foliations and lineations. The texturally stable mineral assemblage of the new fabrics records an intense, ductile deformation of the mineral aggregate at temperatures of 700–800 °C associated with amalgamation of eclogite, high-pressure granulitic rocks and ultramafic sheets in deep portions of a subduction channel. The lattice preferred orientation of the main constituent minerals (garnet, augite, amphibole, plagioclase, quartz and biotite) discloses the active deformation mechanisms at the scale of the mineral grains and the relationships with the deformation at larger scales. Overprinting relationships of the metamorphic assemblages demonstrates that partitioning and deformation localization occurred at different scales under similar high-grade conditions. Complete macroscopic transposition in the shear zones was complementary to meso and microscopic partitioning of deformation intensity and mechanisms between different lithological layers and mineral species.     

Influence of syn-sedimentary faults on orogenic structures in a collisional belt: Insights from the inner zone of the Northern Apennines (Italy)

This paper discusses the possible influence of syn-sedimentary structures on the development of orogenic structures during positive tectonic inversion in the inner Northern Apennines (Italy). Examples from key areas located in southern Tuscany provided original cartographic, structural and kinematics data for Late Oligocene-Early Miocene thrusts, organized in duplex systems, verging in the opposite direction of the foreland propagation (back-thrusts), which affected the Late Triassic-Oligocene sedimentary succession of the Tuscan Domain, previously affected by pre-orogenic structures. These latter consist of mesoscopic-to cartographic-scale Jurassic syn-sedimentary normal faults and extensional structures, which gave rise to effective stratigraphic lateral variation and mechanical heterogeneities. Structural analysis of both syn-sedimentary faults and back-thrusts were therefore compared in order to discuss the possible role of the pre-existing anisotropies in influencing the evolution of the back-thrusts. As a result, it can be reasonably proposed that back-thrusts trajectories and stacking pattern were controlled by relevant syn-sedimentary normal faults; these latter were reactivated, in some cases, if properly oriented. Such an issue adds new inputs for discussing the potential role of structural inheritance during tectonic inversions, and helps to better understand the processes suitable for the development of back-thrusts in the inner zones of orogenic belts, as it is the case of the inner Northern Apennines.     

Seismic Hazard Assessment of District Mansehra,Khyber Pakhtoonkhawa,Pakistan

The site of Mansehra is located seismically in an active regime, known as the Crystalline Nappe Zone and Hazara-Kashmir Syntaxis in NW Himalayas, Pakistan. Seismic Hazard Assessment （SHA） for the site has been carried out by considering the earthquake source zones, selection of appropriate attenuation equations, near fault effects and maximum potential magnitude estimation. The Mansehra Thrust, Oghi Fault, Banna Thrust, Balakot Shear Zone, Main Boundary Thrust, Panjal Thrust, Jhelum Fault and Muzaffarabad Fault and, further to the south, the Sanghargali, Nathiagali, and Thandiani Thrusts are the most critical tectonic features within the 50 km radius of Mansehra. Using the available instrumental seismological data from 1904 to 2007, SHA has been carried out. Other reactivated critical tectonic features in the area have been investigated. Among them the Balakot-Bagh fault, with the fault length of 120 km from Balakot to Poonch, has been considered as the most critical tectonic feature on the basis of geological/structural/seismological data. The potential earthquake of maximum magnitude 7.8 has been assigned to the Balakot-Bagh fault using four regression relations. The peak ground acceleration value of 0.25 g （10% probability of exceedance for 50 years） and 0.5 g has been calculated with the help of the attenuation equation using probabilistic and deterministic approaches.     

Modelling sediment transport in stream channels in the arid zone of India

Ephemeral channels in arid regions convey larger amounts of sediment than perennial channels in humid regions. Sediment graphs at the outlet of channels have been derived by the standard sediment rating curve technique and by a lumped model based on the instantaneous unit sediment graph (IUSG) concept. The IUSG gives estimates of sediment transport that are better than those derived with the sediment rating curve as it takes into account the availability of erodible material within the channel bed.     

Fractal size and spatial distributions of fault zones: An investigation into the seismic Chelungpu Fault, Taiwan

Abstract   The fractality of fault zones of thickness T for the 248-m-long core from a borehole penetrating the northern segment of the seismic Chelungpu Fault, Taiwan, was analyzed. The frequency curve of T shows that the fractal dimension is normal when T is smaller than a characteristic thickness T _c, and it becomes abnormally large when T exceeds T _c. The fractal dimensions of size and spatial distributions of T increase as the mean distribution density of T increases, which is inconsistent with the evolution laws for ordinary brittle faults. This discrepancy implies that the thickening rate of T when T is more than T _c is not constant, but a decreasing function of fault displacement. The slow thickening rate is related to the elastohydrodynamic lubrication which was effective on the fault when T exceeds T _c. This slip instability mechanism can explain the large, fast and smooth slip on the northern segment of the Chelungpu Fault during the 1999 Chi-Chi earthquake.     

长白山森林植被的生态气候学指标

在全球变化和植被与气候关系的研究中侧重与大尺度、宏观的抽象研究，对小尺度、微观的具体地段植被与气候关系的研究则即地生态气候的研究尚待深入。本文在建立生态气候学指标的基础上，应用桑斯威特（C.W.Thornthwaite)的方法对长白山森林植被的空间分布进行了定量分析。计算了长白山不同坡向不同高度的温度效率指数。根据30个主要树种的温度效率指数，确定了长白山不同坡向的各植被垂直带的温度效率指数及分布高度。并利用AreGIS8.1软件做长白山1：1000000的DEM图，得到长白山不同坡向各垂直带植被与温度效率指数的关系图。     

Subduction,fluids, and accessory minerals: a celebration of the career of Sorena S. Sorensen

ABSTRACT

This is a preface to the topical issue entitled ‘Subduction, Fluids, and Accessory Minerals: A Celebration of the Career of Sorena S. Sorensen’