高大建筑物影响城市粗糙副层流场特征的数值研究

用数值模拟方法研究了高大建筑物对城市粗糙副层气流场特征的影响。数值模式采用基于雷诺平均纳维—斯托克斯方程组的应用计算流体力学FLUENT软件,次网格湍流参数化选用k-ε闭合方案。建筑物用立方体表示,并规则排列于模拟区域内。通过改变高大建筑物的数量与位置,对建筑物阵列内及其上空的气流特征进行了多个算例的数值模拟。依据模拟结果计算获得建筑物区域的面积平均风速廓线,结果表明各算例的粗糙副层风速廓线各不相同。运用动力学方法由风速廓线计算出各算例的零平面位移高度和粗糙度,并与几种计算零平面位移高度和粗糙度的形态学方法进行了比较检验。结果表明两种形态学方法(Ba、Ma)计算所得的零平面位移高度与动力学方法计算结果很接近,但对于粗糙度而言,几种形态学方法的计算结果都明显偏高。     

引射孔倾角与孔径对钻头体反循环形成影响的仿真分析与实验研究

介绍了引射装置的工作原理及其在反循环取心钻头体上的应用，运用FLUENT流体工程仿真软件分别对不同倾角与不同直径引射孔内部形成的负压进行模拟，得到对应压力分布云图与数值，并根据所得结论制造出带有不同角度和不同孔径的引射装置，在实验室进行试验研究，所得数据与仿真结果比较，二者基本吻合，说明运用仿真技术对引射结构进行优化设计是可靠的，并且过程简单，与过去常用的经验法与试验法相比，成本低，周期短，结论更准确。     

Representing the bed roughness of coarse‐grained streams in computational fluid dynamics

Computational fluid dynamics (CFD) applications are increasingly utilized for modelling complex flow patterns in natural streams and rivers. Although CFD has been successfully implemented to model many complex flow situations in natural stream settings, adequately characterizing the effects of gravel and cobble beds on flow hydraulics in CFD is a difficult challenge due to the scale of roughness lengths and the inadequacy of traditional roughness representations to characterize flow profiles in situations with large roughness elements. An alternative method of representing gravel and cobble beds is presented. Appropriate drag forces associated with different grain sizes are computed and included in the momentum equations to account for the influence of a hydraulically rough bed. Comparisons with field measurements reveal reasonable agreement between measured and modelled profiles of spatially averaged velocity and turbulent kinetic energy, and model fidelity to the non‐logarithmic behaviour of the velocity profiles. The novel method of representing coarse beds expands the utility of CFD for investigating physical processes in natural channels with large bed roughness. Copyright © 2005 John Wiley & Sons, Ltd.     

Sediment transport simulation and design optimization of a novel marsh shoreline protection technology using computational fluid dynamics (CFD) modeling

Coastal Louisiana has the nation's most fragile and valuable wetlands,whose loss represents 80%of the total losses in the United States.The severely restricted mobility of conventional shoreline protection structures makes them impossible to be redeployed.The Wave Suppression and Sediment Collection(WSSC)system is a novel technology of high mobility and compatible with existing shoreline protection technologies.Previous laboratory studies on WSSC showed great potential for wave reduction and sediment collection.The current study aimed to optimize the design parameters of WSSC using a validated computational model.A computational fluid dynamics(CFD)model was developed and validated using experimental data from the previous laboratory study.Then,a parametric analysis was conducted with a focus on the performance optimization of wave reduction and sediment collection with respect to pipe diameter and face slope.Simulation results showed that the wave reduction efficiency decreased with increasing pipe diameter and face slope.In contrast,the sediment transport efficiency was enhanced by increasing pipe diameter but was not affected significantly by varying face slopes.     

扭王字块体斜坡堤越浪量的数值研究

鉴于《港口与航道水文规范》(JTS145—2015)中缺少扭王字块体斜坡堤越浪量的计算方法,因此开展相关的试验研究对规范发展和工程设计具有重要意义。在基于FLUENT软件的数值模型中,通常采用多孔介质区中的系数C来模拟斜坡上扭王字块体的消浪作用,而确定每种工况系数C的取值是实现数值模拟斜坡堤越浪量的关键。借助物模试验率定出所有工况的系数C,通过单一变量分析,发现C值随波陡、相对水深、相对坡肩宽度及相对块体尺寸的增大而增大,随相对堤顶超高及相对胸墙高度的增大而减小,综合以上影响因素,得出不同坡度下系数C的计算关系式。研究成果不仅丰富了规范内容,还为相关的工程设计提供了参考。     

Numerical simulations using momentum source wave-maker applied to RANS equation model

For Navier-Stokes equation model using the VOF scheme, Lin and Liu (Lin, P. and Liu, P.L.-F. (1999). Internal wave-maker for Navier-Stokes equations models. J. Waterw. Port Coast. Ocean Eng., 125 (4), 207–215.) developed an internal wave-maker method for which a mass source function of the continuity equation was used to generate target wave trains. Using this internal wave-maker method, various numerical experiments have been conducted without any problems due to waves reflected by a wave-maker. In this study, an internal wave-maker method using a momentum source function was proposed. Various numerical simulations in two and three dimensions were performed using the momentum source wave-maker applied to the RANS equation model in a CFD code, FLUENT. To verify their applicability in 2 dimensions, the computational results obtained using the momentum source wave-maker in a channel of constant depth were compared with the results obtained by using the mass source wave-maker and with the analytical solutions. And the results of the present numerical simulations of hydraulic experiments, which represent nonlinear waves on a submerged shoal and breaking waves on a plane beach, were compared with measurements. The comparisons showed good agreements between them. To see their applicability into 3-dimensional cases, the present results in a basin of constant depth were compared with the analytical solutions, and they agreed well with each other. In addition, vertical variation of longshore current was presented by using the 3-dimensional simulation results.     

Application of FLUENT on fine-scale simulation of wind field over complex terrain

The state-of-art Computational Fluid Dynamics （CFD） codes FLUENT is applied in a fine-scale simulation of the wind field over a complex terrain. Several numerical tests are performed to validate the capability of FLUENT on describing the wind field details over a complex terrain. The results of the numerical tests show that FLUENT can simulate the wind field over extremely complex terrain, which cannot be simulated by mesoscale models. The reason why FLUENT can cope with extremely complex terrain, which can not be coped with by mesoscale models, relies on some particular techniques adopted by FLUENT, such as computer-aided design （CAD） technique, unstructured grid technique and finite volume method. Compared with mesoscale models, FLUENT can describe terrain in much more accurate details and can provide wind simulation results with higher resolution and more accuracy.     

带胸墙斜坡堤越浪量的数值试验研究

采用黏性流体的连续性方程、雷诺时均N-S方程作为基本控制方程,RNG k-ε模型模拟湍流效应,VOF方法捕捉流体自由表面,结合主动吸收式造波理论,借助FLUENT软件建立二维不规则波数值水槽。在验证数值水槽造波性能的基础上,数值模拟带胸墙斜坡堤的越浪,并将数值计算的平均越浪量与已有物模试验值进行对比,两者趋势一致,吻合良好;表明该数值水槽模拟不规则波作用带胸墙斜坡堤越浪的准确性。针对带胸墙斜坡堤,藉此分析了堤顶超高、斜坡坡比、坡肩宽度及坡肩高度对其平均越浪量影响的规律性,研究成果对斜坡堤工程设计具有重要的参考意义。     

Flow around a partly buried cylinder in a steady current

The flow around a cylinder, surface mounted or partly buried has been examined at Reynolds number of 1.3×10⁴ and 2.6×10⁴ by using the flow visualization method in the case of steady current. The lengths of the upstream and downstream separation regions were determined and the characteristics of the flow area were discussed for the cylinder having different burial depth to the diameter ratio (G/D). For comparsion, some numerical results obtained from the application of the FLUENT, computational fluid dynamics (CFD) software package have also been presented. Both experimental and numerical results indicated that the lengths of the separation regions near the upstream and downstream of the cylinder decreased with the increasing burial ratio (G/D=0, 0.20, 0.50). The results have significant implications both for the illustration of the potential for using CFD software and highlighting the need for data of two dimensional flow around the buried cylinder.     

基于正交实验的卧式浪流发电轮机叶片分析

基于现有波浪能和潮流能发电装置研究现状,为达到波浪和潮流同时利用的目的,设计了一种以卧式轮机形式同时吸收水平波浪螺旋力和潮流能动力的新型浪流发电装置。通过正交试验设计得到三指标最佳叶片参数组合后,进行FLUENT流场分析,从流体角度出发,在其扭矩、推力以及轮机功率三方面对比分析,阐明了叶片参数对于轮机流场的作用趋势,并以此趋势为参考择出最佳模型。后期水槽实验有效验证了该卧式浪流轮机的浪流结合吸收的可行性。