Distorted Froude‐scaled flume analysis of large woody debris

This paper presents the results of a movable‐boundary, distorted, Froude‐scaled hydraulic model based on Abiaca Creek, a sand‐bedded channel in northern Mississippi. The model was used to examine the geomorphic and hydraulic impact of simplified large woody debris (LWD) elements. The theory of physical scale models is discussed and the method used to construct the LWD test channel is developed. The channel model had bed and banks moulded from 0·8 mm sand, and flow conditions were just below the threshold of motion so that any sediment transport and channel adjustment were the result of the debris element. Dimensions and positions of LWD elements were determined using a debris jam classification model. Elements were attached to a dynamometer to measure element drag forces, and channel adjustment was determined through detailed topographic surveys. The fluid drag force on the elements decreased asymptotically over time as the channel boundary eroded around the elements due to locally increased boundary shear stress. Total time for geomorphic adjustment computed for the prototype channel at the Q₂ discharge (discharge occurring once every two years on average) was as short as 45 hours. The size, depth and position of scour holes, bank erosion and bars created by flow acceleration past the elements were found to be related to element length and position within the channel cross‐section. Morphologies created by each debris element in the model channel were comparable with similar jams observed in the prototype channel. Published in 2001 John Wiley & Sons, Ltd.     

海洋调查数据的可视化建模及实现方法

科学计算可视化作为新一代的分析工具 ,正在进入物理海洋学领域。文中介绍对海洋调查数据进行可视化的关键问题——数据建模 ,并从分析海洋调查数据的特点出发提出针对海洋研究中可视化建模的原则和有效途径 ,给出相关的实现方法。其中 ,重点讨论局部体样条建模中必须面对的区域分割优化问题 ,引入遗传算法并给出较好的解决方案。     

Control of Aptian palaeobathymetry on turbidite distribution in the Buchan Graben,Outer Moray Firth,Central North Sea

It is widely recognised that palaeobathymetry is a key control on the distribution of turbidite deposits. Thus, the utilisation of palaeobathymetric surfaces as an input for numerical turbidity current modelling offers a potentially powerful method to predict the distribution of deep marine sands in ancient (subsurface or outcrop) successions. Such an approach has been tested on an Aptian turbidite deposit from the Buchan Graben, UK Central North Sea, where modelled sand distributions could be quality controlled against available well data.     

‘A Case Study on a Polar Cold Air Outbreak over Fram Strait using a Mesoscale Weather Prediction Model’

The mesoscale weather prediction model ’Lokal-Modell’ (LM) of the Deutscher Wetterdienst is applied to the situation of an Arctic cold air outbreak in the Fram Strait region in April 1998. Observations are available from a flight along 5⁰E carried out during the ARTIST campaign. Initial and time-dependent boundary data for the simulation are taken from a larger scale operational model system. Using the standard configuration of LM, the simulation reproduced the propagation of cold air and the characteristic structure of the atmospheric boundary layer (ABL) in fair agreement with the observations. However, a detailed comparison revealed three basic problems. Firstly, there is evidence that the available data on sea-ice conditions were insufficient approximations to the true state for several reasons. A modification of the sea-ice data towards observations revealed that parts of the discrepancies were due to the original sea-ice data. Secondly, a control run with the model in its standard configuration shows an insufficient warming of the ABL downstream of the ice edge due to underestimation of surface heat fluxes. A simple modification of the approach for the scalar roughness length resulted in the strongest benefit, while comparative studies showed only a slight sensitivity to different types of parametrisation of turbulent mixing or the inclusion of an additional moist convection parametrisation. Thirdly, in all the simulations the deepening of the convective ABL downstream of the ice edge is weaker than observed. This may be partly due to the thermal stratification above the ABL in the analysis data, which is more stable than observed; but it may also be a hint to the fact that processes near the inversion are insufficiently parametrised in mesoscale models with resolutions as used in LM. The simulated cloud layer in the convective ABL is similar to that observed with respect to condensate content, a sharply defined cloud top, a diffuse lower bound, and continuous light precipitation.     

Three-dimensional model and late stage warping of the Plattengneis Shear Zone in the Eastern Alps

The Plattengneis shear zone is a 250–600 m thick, flat lying, Cretaceous, eclogite facies, mylonitic shear zone, with north-over-south transport direction, that is exposed over almost 1000 km² in the Koralpe region along the eastern margin of the Alps. Although the shear zone is one of the largest in the Alps, its role in the Eoalpine metamorphic evolution and the subsequent exhumation of the region, remain enigmatic and its large-scale geometry is not well understood. The outcrop pattern suggests that the shear zone is made up of a single sheet that is folded into a series of open syn- and antiforms with wavelengths of about 10 km. Eclogite bodies occur above, within and below the shear zone and there is no metamorphic grade change across the shear zone. In the south, the fold axes strike east–west and plunge shallowly to the east. In the north, the fold axes are oriented in north–south direction and form a dome shaped structure of the shear zone. Total shortening during this late stage warping event was of the order of 5%. Indirect evidence constrains this folding event to have occurred between 80 and 50 Ma and the fold geometry implies that the final exhumation in the Koralpe occurred somewhat later than further north. Interestingly, the shear zone appears to strike out of the topography in the south and dip into the topography in the north, so that north of the shear zone only hanging-wall rocks are exposed and south of it only foot-wall rocks. Possibilities for the geometric relationship of the Plattengneis shear zone with the surrounding south dipping detachments are discussed.     

Thermodynamic Modelling of Ore-Forming Mechanism of the Changkeng Gold-Silver Deposits in Guangdong Province

The Changkeng gold-silver deposits consist of a sediment-hosted, disseminated gold deposit and a replacement-type silver deposit. The mineralizations of gold and silver are zoned and closely related to the silicification of carbonate and clastic rocks, so that siliceous ores dominate in the deposit. The mineralizing temperature ranges mainly from 300 to 170℃, and K+, Na+, Ca2+, Mg2+, and Cl- are the major ions in the ore-forming fluid. Calculations of distribution of metal complexes show that gold is mainly transported by hydrosulphide complexes, but chloride complexes of silver, iron, lead, and zinc, which are transformed into hydroxyl and hydrosulphide complexes under neutral to weak-alkaline circumstances in the late stage, predominate in the ore-forming solutions. Water-rock interaction is confirmed to be the effective mechanism for the formation of silver ores by computer modelling of reaction of hydrothermal solution with carbonate rocks. The solubility analyses demonstrate that the precipitation     

Investigating potential future changes in surface water flooding hazard and impact

Surface water flooding (SWF) is a recurrent hazard that affects lives and livelihoods. Climate change is projected to change the frequency of extreme rainfall events that can lead to SWF. Increasingly, data from Regional Climate Models (RCMs) are being used to investigate the potential water-related impacts of climate change; such assessments often focus on broad-scale fluvial flooding and the use of coarse resolution (>12 km) RCMs. However, high-resolution (<4 km) convection-permitting RCMs are now becoming available that allow impact assessments of more localised SWF to be made. At the same time, there has been an increasing demand for more robust and timely real-time forecast and alert information on SWF. In the UK, a real-time SWF Hazard Impact Model framework has been developed. The system uses 1-km gridded surface runoff estimates from a hydrological model to simulate the SWF hazard. These are linked to detailed inundation model outputs through an Impact Library to assess impacts on property, people, transport, and infrastructure for four severity levels. Here, a set of high-resolution (1.5 km and 12 km) RCM data has been used as input to a grid-based hydrological model over southern Britain to simulate Current (1996–2009) and Future (~2100s; RCP8.5) surface runoff. Counts of threshold-exceedance for surface runoff and precipitation (at 1-, 3- and 6-hr durations) are analysed. Results show that the percentage increases in surface runoff extremes, are less than those of precipitation extremes. The higher-resolution RCM simulates the largest percentage increases, which occur in winter, and the winter exceedance counts are greater than summer exceedance counts. For property impacts, the largest percentage increases are also in winter; however, it is the 12-km RCM output that leads to the largest percentage increase in impacts. The added-value of high-resolution climate model data for hydrological modelling is from capturing the more intense convective storms in surface runoff estimates.     

Estimation of irrigation return flow on monthly time resolution using SWAT model under limited data availability

ABSTRACT

This study is an assessment of the return flow ratio of an irrigation abstraction using the flow records of a downstream stream-gauging station, with the example of the Kozluk scheme irrigated by diverted water from Garzan Creek flowing through the southeastern region of Turkey. In the planning reports of the major dam projects of the region, an unverified return ratio was assumed in eliminating the influence of this irrigation on the flow measurements of Garzan Creek. The correctness of this assumed return ratio is evaluated by analysing the monthly streamflow measurements of the Besiri station through a Soil and Water Assessment Tool (SWAT) model constructed with the coarse-scale topography, land use and soil data from open source databases. The results show the necessity of irrigation project-based return flow analyses using regional fine-scale datasets, instead of rule-of-thumb assumptions, to determine the effects of irrigation activities on flow regimes more accurately.     

临汾裂谷现代构造应力场特征及其数值模拟

根据断层错动资料和小地震的平均震源机制解结果,运用弹性力学的叠加原理,对临汾裂谷作三维有限元模拟,反演其构造应力场。结果表明,临汾裂谷现今主要受南东东-北西西向引张力作用,辅之以北东-南西方向的挤压,同时在裂谷的中心叠加有底层拖曳的深部作用。     

Experimental determination of REE partition coefficients between zircon,garnet and melt: a key to understanding high‐T crustal processes

The partitioning of rare earth elements (REE) between zircon, garnet and silicate melt was determined using synthetic compositions designed to represent partial melts formed in the lower crust during anatexis. The experiments, performed using internally heated gas pressure vessels at 7 kbar and 900–1000 °C, represent equilibrium partitioning of the middle to heavy REE between zircon and garnet during high‐grade metamorphism in the mid to lower crust. The D_REE (zircon/garnet) values show a clear partitioning signature close to unity from Gd to Lu. Because the light REE have low concentrations in both minerals, values are calculated from strain modelling of the middle to heavy REE experimental data; these results show that zircon is favoured over garnet by up to two orders of magnitude. The resulting general concave‐up shape to the partitioning pattern across the REE reflects the preferential incorporation of middle REE into garnet, with D_Gd (zircon/garnet) ranging from 0.7 to 1.1, D_Ho (zircon/garnet) from 0.4 to 0.7 and D_Lu (zircon/garnet) from 0.6 to 1.3. There is no significant temperature dependence in the zircon–garnet REE partitioning at 7 kbar and 900–1000 °C, suggesting that these values can be applied to the interpretation of zircon–garnet equilibrium and timing relationships in the ultrahigh‐T metamorphism of low‐Ca pelitic and aluminous granulites.