Paleo-redox depositional conditions inferred from trace metal accumulation in two Cretaceous-Paleocene organic-rich sequences from Central Egypt

Cretaceous-Paleocene organic-rich sediments in Egypt occur as an east-west trending belt extending from the Quseir-Safaga district (Red Sea) to the Kharga-Dakhla (Western Desert) region. They are associated with the Duwi Formation (phosphate-bearing) and the overlying Dakhla Formation (deeper epicontinental shale/marl). This study aims to reconstruct the paleo-redox conditions during deposition of these thermally immature organic-rich sediments using carbon-sulfur-iron systematics and trace metal proxies in two cores, one each from the Quseir and Abu Tartur areas. Paleoproductivity, based on P content, seems to have been higher in the Quseir section than in the Abu Tartur section. The Quseir section also records a relatively greater occurrence of anoxic conditions during the accumulation of these sediments than the Abu Tartur section. This difference is indicated by its markedly higher total organic carbon (TOC) content as well as higher contributions of redox-sensitive and sulfide-forming metals (Mo, U, Ni, V, and Co). A weak correlation exists between S and TOC, and a positive S intercept (>1) was observed in most of the rock units of the study sections. A high consistency between the TOC-S-Fe relations and trace metals findings was found. The uppermost Duwi and the lowermost Dakhla strata, which have the highest TOC and represent a maximum sea transgression during the Late Cretaceous, have the highest contents of redox-sensitive trace metals. The carbonate-dominated transgressive Baris and Beida members of the Dakhla Formation record relatively stronger oxygen-depleted conditions during their accumulation than others, which led to relatively higher TOC contents and redox-sensitive metal accumulations. A scenario for the environmental conditions that existed during the deposition of these organic-rich successions, based on compiled trace metals and TOC-S-Fe implications, is reconstructed here.     

Origin of the Breno and Esino dolomites in the western Southern Alps (Italy): Implications for a volcanic influence

The Esino Limestone of the western Southern Alps represents a differentiated Ladinian-Lower Carnian (?) carbonate platform comprised of margin, slope and peritidal inner platform facies up to 1000 m thick. A major regional subaerial exposure event lead to coverage by another peritidal Lower Carnian carbonate platform (Breno Formation). Multiphase dolomitization affected the carbonate sediments. Petrographic examinations identified at least three main generations of dolomites (D1, D2, and D3) that occur as both replacement and fracture-filling cements. These phases have crystal-size ranges of 3–35 μm (dolomicrite D1), 40–600 μm (eu-to subhedral crystals D2), and 200 μm to 5 mm (cavity- and fracture-filling anhedral to subhedral saddle dolomite D3), respectively.The fabric retentive near-micritic grain size coupled with low mean Sr concentration (76 ± 37 ppm) and estimated δ¹⁸O of the parent dolomitizing fluids of D1 suggest formation in shallow burial setting at temperature ∼ 45–50 °C with possible contributions from volcanic-related fluids (basinal fluids circulated in volcaniclastics or related to volcanic activity), which is consistent with its abnormally high Fe (4438 ± 4393 ppm) and Mn (1219 ± 1418 ppm) contents. The larger crystal sizes, homogenization temperatures (D2, 108 ± 9 °C; D3, 111 ± 14 °C) of primary two-phase fluid inclusions, and calculated salinity estimates (D2, 23 ± 2 eq wt% NaCl; D3, 20 ± 4 eq wt% NaCl) of D2 and D3 suggest that they formed at later stages under mid-to deeper burial settings at higher temperatures from dolomitizing fluids of higher salinity, which is supported by higher estimated δ¹⁸O values of their parent dolomitizing fluids. This is also consistent with their high Fe (4462 ± 4888 ppm; and 1091 ± 1183 ppm, respectively) and Mn (556 ± 289 ppm and 1091 ± 1183 ppm) contents, and low Sr concentrations (53 ± 31 ppm and 57 ± 24 ppm, respectively).The similarity in shale-normalized (SN) REE patterns and Ce (Ce/Ce*)_SN and La (Pr/Pr*)_SN anomalies of the investigated carbonates support the genetic relationship between the dolomite generations and their calcite precursor. Positive Eu anomalies, coupled with fluid-inclusion gas ratios (N₂/Ar, CO₂/CH₄, Ar/He), high F⁻ concentration, high F/Cl and high Cl/Br molar ratios suggest an origin from diagenetic fluids circulated through volcanic rocks, which is consistent with the co-occurrence of volcaniclastic lenses in the investigated sequence.     

Community‐Derived Standards for LA‐ICP‐MS U‐(Th‐)Pb Geochronology – Uncertainty Propagation,Age Interpretation and Data Reporting

The LA‐ICP‐MS U‐(Th‐)Pb geochronology international community has defined new standards for the determination of U‐(Th‐)Pb ages. A new workflow defines the appropriate propagation of uncertainties for these data, identifying random and systematic components. Only data with uncertainties relating to random error should be used in weighted mean calculations of population ages; uncertainty components for systematic errors are propagated after this stage, preventing their erroneous reduction. Following this improved uncertainty propagation protocol, data can be compared at different uncertainty levels to better resolve age differences. New reference values for commonly used zircon, monazite and titanite reference materials are defined (based on ID‐TIMS) after removing corrections for common lead and the effects of excess ²³⁰Th. These values more accurately reflect the material sampled during the determination of calibration factors by LA‐ICP‐MS analysis. Recommendations are made to graphically represent data only with uncertainty ellipses at 2s and to submit or cite validation data with sample data when submitting data for publication. New data‐reporting standards are defined to help improve the peer‐review process. With these improvements, LA‐ICP‐MS U‐(Th‐)Pb data can be considered more robust, accurate, better documented and quantified, directly contributing to their improved scientific interpretation.     

内蒙古北山额勒根乌兰乌拉一带土壤测量地球化学特征及找矿方向

研究区位于内蒙古北山北带,成矿地质条件优越,1∶20万水系沉积物测量异常明显,且分布有额勒根乌兰乌拉斑岩型钼(铜)矿。以1∶5万土壤地球化学测量成果为依据,以地质认识为基础,研究了区内元素地球化学数据特征、地球化学场特征及综合异常特征。认为区内主成矿元素为Mo、Cu、Au,主要的控矿层位为咸水湖组火山岩段,成矿有利侵入体为石炭纪花岗闪长岩。划分出5种综合异常类型,其中与斑岩钼(铜)矿系统有关的综合异常和与奥陶系建造有关的综合异常是今后解剖找矿的重点。     

Petrological and Os Isotopic Characteristics of Zedong Peridotites in the Eastern Yarlung–Zangbo Suture in Tibet

The Zedong ophiolites in the eastern Yarlung–Zangbo suture zone of Tibet represent a mantle slice of more than 45 km~2. This massif consists mainly of mantle peridotites, with lesser gabbros, diabases and volcanic rocks. The mantle peridotites are mostly harzburgite, lherzolite; a few dike-like bodies of dunite are also present. Mineral structures show that the peridotites experienced plastic deformation and partial melting. Olivine(Fo89.7–91.2), orthopyroxene(En_(88–92)), clinopyroxene(En_(45–49) Wo_(47–51) Fs_(2–4)) and spinel [Mg~#=100×Mg/(Mg+Fe)]=49.1–70.7; Cr~#=(100×Cr/(Cr+Al)=18.8–76.5] are the major minerals. The degree of partial melting of mantle peridotites is 10%–40%, indicating that the Zedong mantle peridotites may experience a multi–stage process. The peridotites are characterized by depleted major element compositions and low REE content(0.08–0.62 ppm). Their "spoon–shaped" primitive–mantle normalized REE patterns with(La/Sm)_N being 0.50–6.00 indicate that the Zedong ultramafic rocks belong to depleted residual mantle rocks. The PGE content of Zedong peridotites(18.19–50.74 ppb) is similar with primary mantle with Pd/Ir being 0.54–0.60 and Pt/Pd being 1.09–1.66. The Zedong peridotites have variable, unradiogenic Os isotopic compositions with ~(187)Os/~(188)Os=0.1228 to 0.1282. A corollary to this interpretation is that the convecting upper mantle is heterogeneous in Os isotopes. All data of the Zedong peridotites suggest that they formed originally at a mid-ocean ridge(MOR) and were later modified in supra–subduction zone(SSZ) environment.     

高压超高压变泥质岩适用的地质温压计评述

高压超高压变泥质岩形成温压条件及p-T演化轨迹是高压超高压变质作用研究的重要内容。本文介绍了高压超高压变泥质岩适用的几种地质温压计,包括石榴子石-多硅白云母Fe~(2+)-Mg交换温度计、石榴子石-绿泥石Fe~(2+)-Mg交换温度计、硬绿泥石-绿泥石Fe~(2+)-Mg交换温度计、多硅白云母Si含量压力计、金红石Zr含量温度计、榍石Zr含量温压计、锆石Ti含量温度计、石英Ti含量温度计以及氧同位素温度计,并对上述温压计的适用条件及使用时的注意事项做了简要评述。     

Results of magnetotelluric surveyon reference geophysical profiles of the Karaton-Sarkamys block in Kazakhstan

A digital geoelectric model of the Karaton-Sarkamys block located in the southern (Kazakhstan) part of the Caspian Depression has been developed on the basis of processing and interpretation of magnetotelluric sounding data. Geoelectric sections and structural maps of geoelectric layers have been constructed. It has been shown that magnetotelluric sounding combined with seismic and GIS data can be efficiently used to obtain additional information on the lithologic and reservoir properties of petroleum plays.     

Effect of 2D spatial variability on slope reliability: A simplified FORM analysis

To meet the high demand for reliability based design of slopes, we present in this paper a simplified HLRF(Hasofere Linde Rackwitze Fiessler) iterative algorithm for first-order reliability method(FORM). It is simply formulated in x-space and requires neither transformation of correlated random variables nor optimization tools. The solution can be easily improved by iteratively adjusting the step length. The algorithm is particularly useful to practicing engineers for geotechnical reliability analysis where standalone(deterministic) numerical packages are used. Based on the proposed algorithm and through direct perturbation analysis of random variables, we conducted a case study of earth slope reliability with complete consideration of soil uncertainty and spatial variability.     

Landfill site selection based on reliability concepts using the DRASTIC method and AHP integrated with GIS – a case study of Bengaluru city,India

The selection of landfill sites for municipal solid waste (MSW) disposal involves consideration of geological, hydrological and environmental parameters which exhibit large spatial variability. Therefore, it is necessary to define, to what extent the chosen sites are reliable such that the probability of environmental pollution and health risks to population is minimal. In the present study, groundwater vulnerability to contamination has been assessed using the standard DRASTIC method. The results showed that the study region has 9.45% of very less, 32.94% of less, 25.47% of moderate, 22.79% of high and 9.35% of very high vulnerable zones. The study also revealed that none of the landfills are located in safe zones. This suggests that it requires proper remedial measures to avoid environmental pollution. A landfill site selection process has been carried out using the Analytical Hierarchy Process integrated with Geographical Information System tools. The obtained results showed that only 3.59?km² (0.08%) of the total area is suitable for landfills. The reliability analysis of the site suitability revealed that landfills are located at unreliable locations where the probability of risk to environmental pollution is high. The presented approach assists decision-makers in selecting reliable locations for the safe disposal of MSW.     

The geothermal formation mechanism in the Gonghe Basin: Discussion and analysis from the geological background

The Gonghe Basin, a Cenozoic down-warped basin, is located in the northeastern part of the Qinghai-Xizang (Tibetan) Plateau, and spread over important nodes of the transfer of multiple blocks in the central orogenic belt in the NWW direction. It is also called “Qin Kun Fork” and “Gonghe Gap”. The basin has a high heat flow value and obvious thermal anomaly. The geothermal resources are mainly hot dry rock and underground hot water. In recent years, the mechanism of geothermal formation within the basin has been controversial. On the basis of understanding the knowledge of predecessors, this paper proposes the geothermal formation mechanism of the “heat source–heat transfer–heat reservoir and caprock–thermal system” of the Gonghe Basin from the perspective of a geological background through data integration-integrated research-expert, discussion-graph, compilation-field verification and other processes: (1) Heat source: geophysical exploration and radioisotope calculations show that the heat source of heat in the basin has both the contribution of mantle and the participation of the earth’s crust, but mainly the contribution of the deep mantle. (2) Heat transfer: The petrological properties of the basin and the exposed structure position of the surface hot springs show that one transfer mode is the material of the mantle source upwells and invades from the bottom, directly injecting heat; the other is that the deep fault conducts the deep heat of the basin to the middle and lower parts of the earth’s crust, then the secondary fracture transfers the heat to the shallow part. (3) Heat reservoir and caprock: First, the convective strip-shaped heat reservoir exposed by the hot springs on the peripheral fault zone of the basin; second, the underlying hot dry rock layered heat reservoir and the upper new generation heat reservoir and caprock in the basin revealed by drilling data. (4) Thermal system: Based on the characteristics of the “heat source-heat transfer-heat reservoir and caprock”, it is preliminarily believed that the Gonghe Basin belongs to the non-magmatic heat source hydrothermal geothermal system (type II2₁) and the dry heat geothermal system (type II2₂). Its favorable structural position and special geological evolutionary history have given birth to a unique environment for the formation of the geothermal system. There may be a cumulative effect of heat accumulation in the eastern part of the basin, which is expected to become a favorable exploration area for hot dry rocks.