Wave‐induced pore pressure in relation to ocean floor stability of cohesionless soils

One of the important geotechnical considerations for many engineering installations, such as pipelines and anchors, in an oceanic environment involving sand deposits is that of potential ocean floor instability due to the development of high pore pressures caused by the direct action of waves. This article presents a procedure for evaluating the magnitude and distribution of wave‐induced pore pressures in ocean floor deposits. The method takes into account the distribution of wave‐induced pore pressures in ocean floor deposits. The method takes into account the distribution of cyclic shear stresses in the soil profile as well as the important factor of pore‐pressure dissipation. The variation of properties within the soil profile can also be easily incorporated into the analytical procedure. The analysis provides the complete time history of pore‐pressure response and shows clearly that failure to include the pore‐pressure dissipation effects would lead to radically conservative design. The results also provide a basis for designing remedial measures, if required, to avert the development of high pore pressures and their deleterious effects.     

Chlorophyll production,in response to nutrient additions,by the algae in Lake Taupo water

In batch cultures of Lake Taupo water, phosphorus was the nutrient limiting plant growth from January to June, and nitrogen took over this role from July to December. Chlorophyll production by algae was often stimulated by trace element additions, but it was uncertain whether total cytoplasmic production was also involved.     

The effect of a topographic high on the morphological stability of a two-inlet bay system

The cross-sectional stability of two tidal inlets connecting the same back-barrier lagoon to the ocean is investigated. The condition for equilibrium is the cross-sectional area tidal prism relationship. In an earlier study [Van de Kreeke, J., 1990. Can multiple inlets be stable? Estuarine, Coastal and Shelf Science 30: 261–273.], using the same equilibrium condition, it was concluded that where two inlets connect the same basin to the ocean ultimately one inlet will close. One of the major assumptions in that study was that the water level in the basin fluctuated uniformly. In hindsight this assumption might be too restrictive. For example, in the Wadden Sea the back barrier lagoon consists of a series of basins, rather than one single basin, separated by topographic highs. These topographic highs limit but do not exclude the exchange of water between the sub-basins. For this reason in the present study, a topographic high in the form of a weir was added, separating the back-barrier lagoon in two sub-basins. The water level in the sub-basins, rather than in the back-barrier as a whole, is assumed to fluctuate uniformly. For this schematization the hydrodynamic equations are solved using a finite difference method. The results, together with the equilibrium condition, yield the equilibrium flow curve for each of the inlets. The intersections of the two equilibrium flow curves represent combinations of cross-sectional areas for which both inlets are in equilibrium. The stability of the equilibriums was investigated using a non-linear stability analysis resulting in a flow diagram. Calculations were carried out for different inlet and weir characteristics. Sinussoidal tides were the same for both inlets. The results show that for relatively large wetted cross-sectional areas over the topographic high, approaching the situation of a single basin, there are no combinations of inlet cross-sectional areas for which both inlets are in a stable equilibrium. This supports the conclusion in the earlier study. For relatively small wetted cross-sectional areas over the topographic high there is one set of stable equilibriums. In that case the two-inlet bay system approaches that of two single-inlet bay systems.     

Stable 85Rb micro vapour cells: fabrication based on anodic bonding and application in chip-scale atomic clocks

We describe the microfabrication of ⁸⁵Rb vapour cells using a glass-silicon anodic bonding technique and in situ chemical reaction between rubidium chloride and barium azide to produce Rb. Under controlled conditions, the pure metallic Rb drops and buffer gases were obtained in the cells with a few mm³ internal volumes during the cell sealing process. At an ambient temperature of 90 ℃ the optical absorption resonance of ⁸⁵Rb D1 transition with proper broadening and the corresponding coherent population trapping (CPT) resonance, with a signal contrast of 1.5% and linewidth of about 1.7 kHz, have been detected. The sealing quality and the stability of the cells have also been demonstrated experimentally by using the helium leaking detection and the after-9-month optoelectronics measurement which shows a similar CPT signal as its original status. In addition, the physics package of chip-scale atomic clock (CSAC) based on the cell was realized. The measured frequency stability of the physics package can reach to 2.1×10^-10 at one second when the cell was heated to 100 ℃ which proved that the cell has the quality to be used in portable and battery-operated devices.     

Experimental analysis of breakwater stability with antifer concrete block

Armor is a pavement made of erosion-resistant materials like a stone or concrete that is constructed to protect breakwater, coasts, and other coastal line features against erosion. These armors are a kind of protective layer made of stone or concrete, used in breakwater constructions or coastal lines, arrayed with specific regular or irregular pattern on the breakwater or the coast. The antifer concrete blocks have almost cubic form, often changed into frustum by adding inclined plates to their sides. One of the most important advantages of these armors is their diversified regular and irregular placement patterns. In this study, using the physical modeling and different tests, the stability level of antifer concrete blocks was evaluated considering the decrease of the armor weight. Results of this study show that by a 10% decrease in the block weight, the failure graph slope is increased and the damage is intensified.     

Seismic Stability of Gravity Retaining Structures by Pseudo-Dynamic Method

An analytical expression of a gravity retaining wall's seismic stability against sliding and overturning is proposed in this article. The derivation, aiming at the cohesionless soil with inclined backfill surface and nonvertical wall back, is based on limit equilibrium analysis and the pseudo-dynamic method. The variations of the sliding and overturning stability safe factors with the horizontal seismic acceleration are investigated for different seismic amplification factors, soil friction angles, wall friction angles, vertical seismic acceleration coefficients, wall back inclination angles, and backfill surface inclination angles. The results indicate that the soil friction and horizontal seismic action significantly impact the seismic stability. The increase of vertical earthquake action changes the curvature of stability factor curves. The wall friction and back inclination strengthen the gravity retaining wall's resistance to sliding and overturning failure while the backfill surface inclination plays a negative role in the seismic stability. We also found that the seismic stability safe factors calculated by the proposed method are larger but more reasonable than those by the Mononobe-Okabe method.     

On dynamic coupling effects between a spar and its mooring lines

The responses of a spar constrained by slack mooring lines to steep ocean waves and tensions in the mooring lines are simulated using two different numerical schemes: a quasi-static approach (SMACOS) and a coupled dynamic approach (COUPLE). The two approaches are the same in computing wave loads on the structure. Their difference is in modeling dynamic forces of mooring lines; that is the dynamic forces are included in the computation of COUPLE but neglected in SMACOS. The numerical simulation is examined against the laboratory measurements of the JIP Spar in a water depth of 318 m. The dynamic coupling effects between the JIP Spar and its mooring lines in different water depths (318, 618 and 1018 m) are investigated by the comparison of numerical simulations obtained using the quasi-static and coupled dynamic approaches. It is found that the damping of mooring lines reduces the slow-drift surge and pitch of the Spar, especially in deep water. The reduction in the amplitude of slow-drift surge can reach about 10% in a water depth of 1018 m. The tension in mooring lines may greatly increase in the wave frequency range when dynamic forces in mooring lines are considered. The mooring-line tension in the wave frequency range predicted by the coupled dynamic approach can be eight times as great as the corresponding prediction by the quasi-static approach in a water depth of 1018 m. This finding may have important implications for the estimation of the fatigue strength and life span of the mooring lines deployed in deep water oceans.     

Time domain modelling of the transient asymmetric flooding of Ro-Ro ships

This work aims at contributing to improve knowledge on transient asymmetric flooding through theoretical and experimental research. First, a time domain theoretical model of ship motions and flooding is described. Results from experimental work are presented evidencing that transient asymmetric flooding may cause the capsizing of a Ro-Ro shaped barge. The theoretical model is used to predict the capsize of the Ro-Ro shaped barge. Reasonable agreement between experimental and theoretical results was found. Finally, a review of the European Gateway accident is given and the theoretical model is applied to the study of this type of accident. The conclusion is that this theoretical model, together with an accurate modelling of the flooding of machinery compartments, reproduces successfully the capsizing of the European Gateway due to transient asymmetric flooding. Therefore, the internal arrangement of Ro-Ro ships should be carefully studied at the design stage in order to avoid this phenomenon.     

Heat flow pattern, base of methane hydrates stability zones and BSRs in Shenhu Area, northern South China Sea

Using the collected 433 heat flow values, we estimated the bases of methane hydrate stability zone (BHSZ), in northern South China Sea (NSCS). Through comparing BHSZs with the depths of bottom simulating reflectors (BSRs), in Shenhu Area (SA), we found that there are big differences between them. In the north of SA, where the water depth is shallow, many slumps developed and the sedimentation rate is high, it appears great negative difference (as large as -192%). However, to the southeast of SA, where the water depth is deeper, sedimentation rate is relatively low and uplift basement topography exists, it changes to positive difference (as large as +45%). The differences change so great, which haven’t been observed in other places of the world. After considering the errors from the process of heat flow measurement, the BSR depth, the relationship of thermal conductivity with the sediments depth, and the fluid flow activities, we conclude that the difference should be not caused by these errors. Such big disagreement may be due to the misunderstanding of BSR. The deviant “BSRs” could represent the paleo-BSRs or just gas-bearing sediment layers, such as unconformities or the specific strata where have different permeability, which are not hydraterelated BSRs.     

Growth Aspects and Magnesium Carbonate Concentrations of the Reef Building Octocoral Heliopora coerulea (Pallas) after Transplantation

Abstract. An experiment to test C have's hypothesis on temperature dependent MgCO₃ concentrations in marine calcareous skeletons was undertaken by transplanting colonies of Heliopora coerulea. The corals were transferred from a shallow lagoon with high average temperatures to the outer bottom of a fringing reef, 16 m depth, with low average temperatures. Against expectation, a statistically significant increase of average mol % concentrations from 0.48 to 0.54 % for upper growth regions and from 0.49 to 0.62% for lower growth regions was obtained. Temperature records during the experimentation period and the above data indicate that the mol% MgCO₃ concentration in the skeleton of living Heliopora colonies increases when transplanted to an environment with a lower temperature average than that of their original growth site, and with seasonal temperature fluctuations which are smaller in the experimental site than in the control site. Temperature fluctuations at the control site were up to 2.5 times greater than at the experimental site for most of the observation months. This supports the conclusion that the parameters a) minimum temperature and b) temperature stability of the environment are essential for the incorporation of Mg into the carbonate skeleton matrix of marine organisms. Within this study the results of a quantitative chemical analysis of the carbonate skeleton of H. coerulea are presented and growth data of transplanted colonies compared with those from the control site.