Bringing GPS into harsh environments for fully automated deformation monitoring

Engineering projects that require deformation monitoring frequently utilize geodetic sensors to measure displacements of target points located in the deformation zone. In situations where control stations and targets are separated by a kilometer or more, GPS can offer higher precision position updates at more frequent intervals than can normally be achieved using total station technology. For large-scale deformation projects requiring the highest precision, it is therefore advisable to use a combination of the two sensors. In response to the need for high precision, continuous GPS position updates in harsh deformation monitoring environments, a software has been developed that employs triple-differenced carrier-phase measurements in a delayed-state Kalman filter. Two data sets were analyzed to test the capabilities of the software. In the first test, a GPS antenna was displaced using a translation stage to mimic slow deformation. In the second test, data collected at a large open pit mine were processed. It was shown that the delayed-state Kalman filter developed could detect millimeter-level displacements of a GPS antenna. The actual precision attained depends upon the amount of process noise infused at each epoch to accommodate the antenna displacements. Higher process noise values result in quicker detection times, but at the same time increase the noise in the solutions. A slow, 25 mm displacement was detected within 30 min of the full displacement with sigma values in E, N and U of ±10 mm or better. The same displacement could also be detected in less than 5 h with sigma values in E, N and U of ±5 mm or better. The software works best for detecting long period deformations (e.g., 20 mm per day or less) for which sigma values of 1–2 mm are attained in all three solution components. It was also shown that the triple-differenced carrier-phase observation can be used to significantly reduce the effects of residual tropospheric delay that would normally plague double-differenced observations in harsh GPS environments.

松散堆积体工程边坡变形机理分析及支护对策研究

合理选择开挖坡比、正确认识变形破坏机理是影响松散堆积体边坡稳定性和施工安全的前提, 本文研究了西南地区某松散堆积体工程边坡的结构特征, 根据地形条件确定了合理的开挖坡比, 采用二维有限元研究了开挖边坡的变形机理并根据模拟结果确定潜在滑动面, 在此基础上, 提出支护对策。研究结果表明, 边坡由厚度达70m 的坡洪积、泥石流块碎石堆积体组成, 斜坡下部缓中部稍陡, 开挖平台位于缓坡部位, 根据地形条件结合坡体结构特征确定边坡开挖坡比为1: 0. 75; 数值模拟结果表明, 边坡变形开挖面附近及坡顶拉应力和坡体下部最大剪应力控制, 坡顶部位将首先产生拉张裂隙, 开挖边坡内部产生从坡脚部位向上发展的剪切变形, 滑面一旦与坡顶拉裂缝贯通, 边坡将产生整体失稳; 边坡采用锚拉桩、锚索框架、锚杆框架、排水相结合的综合治理措施进行支护。     

地铁隧道结构变形监测信息管理系统的开发

地铁隧道结构变形监测的特殊性、周期性和长期性,使其信息量非常庞大.信息管理是地铁隧道结构变形监测中一项重要的工作,现有的管理方式效率很低.为了高效、准确地管理监测信息,及时分析预报地铁隧道结构的稳定状况,本文结合南京地铁运营期隧道结构变形监测实例,开发了一套具有变形监测资料存储、预处理、管理分析、可视化分析、预测预报及限值预警等功能的信息管理系统,保证了准确及时快速的数据处理和信息反馈,具有良好的运用和推广前景.     

形变,应变短临前兆标志体系

建立各手段的前兆异常标志,从而组合各类前兆标志体系是“八五”地震短临预报攻关研究项目的重要目标之一。本文以形变,应变手段的主要研究对象,初步建立了一个形变应变短临前兆标志体系,并总结出了各种异常的判别标志,为利用系统优化理论和专家系统理论进一步研究形变应前兆系统和地震之间的关系,从而为提高中短期地震预报的水平打下了一定的基础。     

Strain analysis in Jurassic argillites of the Monte Sirino area (Lagonegro Zone,southern Apennines,Italy) and implications for deformation paths in pelitic rocks

Analysis of strain in Jurassic argillites forming part of the folded and thrusted sedimentary succession of the Lagonegro basin (southern Italian Apennines) has been carried out using ellipsoid-shaped reduction spots as strain markers. Most of the determined finite strain ellipsoids are of oblate type and show a peculiar distribution of the maximum extension direction (X), with maxima either subparallel or subperpendicular to the local fold axes. Using the strain matrix method, two different deformation histories have been considered to assist the interpretation of the observed finite strain pattern. A first deformation history involved vertical compaction followed by horizontal shortening (occurring by a combination of true tectonic strain and volume loss), whereby all strain is coaxial and there is no change in the intermediate axis of the strain ellipsoid. By this type of deformation sequence, which produces a deformation path where total strain moves from the oblate to the prolate strain field and back to the oblate field, prolate strain ellipsoids can be generated and may be recorded where tectonic deformation has not been large enough to reverse pretectonic compaction. This type of deformation history may be of local importance within the study area (i.e. it may characterize some fold hinge regions) and, more generally, is probably of limited occurrence in deformed pelitic rocks. A second deformation sequence considered the superposition of pre-tectonic compaction and tectonic strain consisting of initial layer-parallel shortening followed by layer-parallel shear (related to flexural folding). Also in this instance, volume change during tectonic deformation and tectonic plane strain have been assumed. For geologically reasonable amounts of volume loss due to compaction and of initial layer-parallel shortening, this type of deformation history is capable of producing a deformation path entirely lying within the oblate strain field, but still characterized by a changeover, during deformation, of the maximum extension axis (X) from a position parallel to the fold axis to one perpendicular to it. This type of deformation sequence may explain the main strain features observed in the study area, where most of the measured finite strain ellipsoids, determined from the limb regions of flexural folds, display an oblate shape, irrespective of the orientation of their maximum extension direction (X) with respect to the local structural trends. More generally, this type of deformation history provides a mechanism to account for the predominance of oblate strains in deformed pelitic rocks.     

Quartz deformation mechanisms during Barrovian metamorphism: Implications from crystallographic orientation of different generations of quartz in pelites

The behaviour of quartz during metamorphism is studied based on two case studies from the Barrovian terrains of Sulitjelma in arctic Scandinavia and Loch Tay in the Central Highlands Dalradian of Scotland. Both terrains preserve evidence for metamorphism in pelites involving nucleation and growth of garnet at different times in the deformation history. Data are presented on the size, shape and crystallographic orientation of quartz preserved as inclusions in garnet and as grains in the surrounding matrix. While quartz-grains remain small and dispersed between mica grains, deformation appears to be dominated by grain-boundary sliding accommodated by dissolution–precipitation. At amphibolite facies, textural coarsening occurs by dissolution of small quartz grains and growth of larger quartz grains, coupled with segregation of quartz from mica. As a result, quartz deforms by dislocation creep, developing crystallographic preferred orientations (CPO) consistent with both coaxial and non-coaxial strain. Quartz CPOs with <0001> axes lying parallel to foliation and stretching direction are commonly developed, and best explained by mechanical rotation of inequant (detrital?) quartz grains. There is no evidence for selective entrapment of quartz inclusions in garnet on the basis of quartz crystallographic orientation.     

Mais comment s'écoule donc un glacier ? Aperçu historique

Ice and snow have often helped physicists understand the world. On the contrary it has taken them a very long time to understand the flow of the glaciers. Naturalists only began to take an interest in glaciers at the beginning of the 19th century during the last phase of glacier advances. When the glacier flow from the upslope direction became obvious, it was then necessary to understand how it flowed. It was only in 1840, the year of the Antarctica ice sheet discovery by Dumont d'Urville, that two books laid the basis for the future field of glaciology: one by Agassiz on the ice age and glaciers, the other one by canon Rendu on glacier theory. During the 19th century, ice flow theories, adopted by most of the leading scientists, were based on melting/refreezing processes. Even though the word ‘fluid’ was first used in 1773 to describe ice, more the 130 years would have to go by before the laws of fluid mechanics were applied to ice. Even now, the parameter of Glen's law, which is used by glaciologists to model ice deformation, can take a very wide range of values, so that no unique ice flow law has yet been defined. To cite this article: F. Rémy, L. Testut, C. R. Geoscience 338 (2006).     

Relationship of Uncertainty and Line Segment for Between Polygon Segment Spatial Data in GIS

The mathematic theory for uncertainty model of line segment are summed up to achieve a general conception, and the line error hand model of εσ is a basic uncertainty model that can depict the line accuracy and quality efficiently while the model of εm and error entropy can be regarded as the supplement of it. The error band model will reflect and describe the influence of line uncertainty on polygon uncertainty. Therefore, the statistical characteristic of the line error is studied deeply by analyzing the probability that the line error falls into a certain range. Moreover, the theory accordance is achieved in the selecting the error buffer for line feature and the error indicator. The relationship of the accuracy of area for a polygon with the error loop for a polygon boundary is deduced and computed.     

362℃和差异应力条件下硫化物在NaCl溶液中的再活化实验研究

红透山块状硫化物矿石主要成分为黄铁矿、磁黄铁矿、黄铜矿、闪锌矿和石英、角闪石、黑云母等脉石矿物。切成长40mm 直径17mm 的矿石圆柱用20wt%NaCl 溶液浸泡260小时后装入长江500型活塞-圆筒式三轴应力试验机,在362℃414MPa 围压下加1342MPa 轴压,13小时后于空气中自然冷却。实验后试样长度压缩为32.3mm,算得应变速率为4.1×10~(-6)/s。实验产物中出现大量垂直应力轴的松弛裂缝。黄铁矿强烈脆性破裂,而磁黄铁矿、黄铜矿和闪锌矿以塑性变形为主,局部也发生脆性破裂。再活化黄铁矿、磁黄铁矿和黄铜矿分别充填同种矿物的碎粒间隙。再活化产物也呈细脉穿插脆性变形的黄铁矿碎斑,细脉中以黄铜矿为主,其次是磁黄铁矿,有时含极少量闪锌矿,在磁黄铁矿、黄铜矿和闪锌矿的塑性变形区内,以及变形的石英和其它脉石矿物中均无再活化硫化物产出。实验结果表明在构造应力作用下强干性矿物和地质体容易发生脆性变形,从而为再活化成矿流体的运移和析出矿质提供通道和空间,而韧性变形区较难提供流体通道和矿质沉淀空间。所以,再活化成矿作用容易发生在脆性变形区和韧-脆性转换部位。原生矿石中的黄铜矿在实验条件下比其它三种硫化物更容易再活化。脆性变形的黄铜矿和黄铁矿比起其它矿物来更容易接受含铜流体的叠加,因此地层中的含铜黄铁矿矿胚层最容易受叠加流体作用而形成层控富矿床。     

耒宜高速公路路堑边坡变形破坏特征及其综合治理

耒宜高速公路修建于山岭重丘区 ,沿线地形、地质条件差异较大 ,路堑开挖边坡类型较多 ,特征不一。本文介绍了路堑边坡的主要特征、边坡失稳的主要原因及治理对策。