考虑双向水平地震作用的结构设计问题研究

分析了抗震设计中考虑双向水平地震作用的必要性,指出了研究双向地震作用的必要性,通过国内外规范相关条文的对比指出目前研究有待完善的关键问题和方向,结合近期研究成果对其中几个值得注意的问题提出建议。     

A comparative study between China and U.S. on seismic design philosophy and practice of a long span arch bridge

This paper presents the first of a series of case studies on the seismic design of long span bridges （cable-stayed bridges, suspension bridges and arch bridges） under a cooperative research project on seismic behavior and design of highway bridges between the State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University and the Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo. The objective of this series of case studies is to examine the differences and similarities on the seismic design practice of long span bridges in China and the U.S., to identify research needs and to develop design guidelines beneficial to bridge engineers in both countries. Unlike short to medium span bridges, long span bridges are not included in most seismic design specifications, mainly because they are location dependent and structurally unique. In this paper, an available model of a steel tied half through arch bridge with a main span of 550m in China is discussed. Analysis is focused on comparisons of the seismic responses due to different ground motions. Seismic design criteria and seismic performance requirements for long span bridges in both countries were first introduced and compared, and then three near field earthquake records with large vertical components were selected as the excitations to examine the seismic behavior and seismic vulnerability of the bridge. Results show that （1） the selected near field ground motions cause larger responses to key components （critical sections） of the bridge （such as arch rib ends） with a maximum increase of more than twice those caused by the site specific ground motions; （2） piers, longitudinal girders and arch crowns are more vulnerable to vertical motions, especially their axial forces; and （3） large vertical components of near field ground motions may not significantly affect the bridge＇s internal forces provided that their peak acceleration spectra ordinates only appear at periods of less than 0.2s. However, they may have more influence on the longitudinal displacements of sliding bearings due to their large displacement spectra ordinates at the fundamental period of the bridge.     

Parametric study on performance of bridge retrofitted by unseating prevention devices

1 Introduction Structural retro?t techniques (Roberts, 2005), such as restrainers, concrete shear keys, steel jackets, CFRPshells, base isolators, or dampers have been widely studied and implemented in actual structures based on the experiences learned from past earthquakes. In the Chi-Chi earthquake (EERI, 2001), the damage to simply-supported PCI girder bridges provided a different view from which to examine the function of a rubber bearing system for simply- supported bridges (NCREE,…     

An evaluation of force-based design vs. direct displacement-based design of jointed precast post-tensioned wall systems

The unique features of jointed post-tensioned wall systems, which include minimum structural damage and re-centering capability when subjected to earthquake lateral loads, are the result of using unbonded post-tensioning to attach the walls to the foundation, along with employing energy dissipating shear connectors between the walls. Using acceptance criteria defined in terms of inter-story drift, residual drift, and floor acceleration, this study presents a multiplelevel performance-based seismic evaluation of two five-story unbonded post-tensioned jointed precast wall systems. The design and analysis of these two wall systems, established as the direct displacement-based and force-based solutions for a prototype building used in the PREcast Seismic Structural Systems （PRESSS） program, were performed at 60% scale so that the analysis model could be validated using the PRESSS test data. Both buildings satisfied the performance criteria at four levels of earthquake motions although the design base shear of the direct displacement-based jointed wall system was 50% of that demanded by the force-based design method. The study also investigated the feasibility of controlling the maximum transient inter-story drift in a jointed wall system by increasing the number of energy dissipating shear connectors between the walls but without significantly affecting its re-centering capability.     

水下滑翔机器人运动分析与载体设计

水下滑翔机器人是一种新型水下机器人,具有噪声低、航行距离远、续航时间长、成本低等特点。分析了水下滑翔机器人的驱动机理和运动实现,给出了水下滑翔机器人典型运动的仿真结果,并以正在设计的一水下滑翔机试验样机为研究对象,描述了样机的整体结构布局,详细研究了浮力调节机构、俯仰调节机构和横滚调节机构的实现方法,并就样机中各执行机构的设计实现进行了论述。     

New formulae for capacity energy-based assessment of liquefaction triggering

Abstract

Liquefaction of loose saturated soil deposits is a hazardous type of ground failure occurring under earthquake excitations. Therefore, an accurate estimation of liquefaction potential is extremely important in geotechnical engineering. In the current study, a new model is proposed which estimates the level of strain energy needed for liquefaction initiation. A compiled database containing cyclic tests gathered from previously published works was used to develop new models to predict liquefaction potential. M5′ algorithm was used to find the best correlation between parameters. It was shown that not only the derived formulas are acceptably accurate but also they feature a very simple structure in comparison with available formulas in the literature. The proposed equations are accurate, physically sound and uncomplicated. Furthermore, safety factors were given for different levels of risk, which can be useful for engineering practice. In addition, the influence of different predictors on the liquefaction potential was evaluated and also the significance of input variables was assessed via sensitivity analysis. Finally, a new model was introduced for preliminary estimation of liquefaction potential.     

Analysis of resistance factors for LRFD of soil nail pullout limit state using default FHWA load and resistance models

Abstract

Resistance factors for load and resistance factor design (LRFD) of pullout limit state of both permanent and temporary soil nails are calibrated against a wide design space using the current Federal Highway Administration (FHWA) nail load and resistance models. The calculated resistance factors were shown to scatter broadly among design scenarios that differ in wall face batter, soil friction angle, nail ultimate bond strength, and surcharge live load. An important lesson learned from the analysis results is that the current practice of using a single resistance factor for LRFD of nail pullout limit state could not result in uniform reliabilities across different design scenarios. Simple artificial neural network (ANN) models were developed for computation of resistance factors. Design examples demonstrated the ability of the ANN models in providing resistance factors that yield satisfactory and consistent reliabilities in different nail pullout designs.     

Box-Behnken设计-效应面法优选百合防褐变加工工艺研究

目的：优选百合防褐变的加工工艺。方法：在单因素试验基础上,以王百合苷B含量、褐变度、浸出物为评价指标,采用Box-Behnken设计效应面法考察烫片时间、干燥温度、干燥时间对其质量的影响,优选百合的防褐变加工工艺参数。结果:百合防褐变加工工艺为烫片时间3.5 min,干燥温度90℃,干燥时间3.0 h。结论：优选的百合防褐变加工工艺合理可行,可适用于工业生产。     

徕卡激光雷达技术在铁路全生命周期中的应用

为了将激光雷达技术应用到铁路全生命周期中,充分发挥激光雷达技术的优势,本文以徕卡公司相关激光雷达产品为例,系统分析了不同类型的激光雷达的特点和铁路工程不同阶段的测量要求,总结了激光技术在铁路全生命周期中的应用方法。通过典型工程应用分析表明,激光雷达技术可显著提高铁路工程测量的效率和质量,具有良好的应用前景。     

基于像元二分模型的地表植被覆盖度估算模块化设计与实现

地表植被覆盖度是的一种应用广泛的定量遥感产品,在水文、生态、区域变化等方面都具有重要的意义。像元二分模型是应用最多的一种遥感估算地表覆盖度的方法。目前,用遥感的方法进行地表植被覆盖度估算没有完整、系统的工具,用户只能逐步进行操作,效率低下,鉴于上述情况,本文运用IDL交互式数据语言,基于ENVI二次开发了一个植被覆盖度估算程序,取得了一定的成效,对遥感定量产品的生产、应用具有一定意义。