Study of geothermal water intrusion due to groundwater exploitation in the Puebla Valley aquifer system, Mexico

Significant intrusion of geothermal water into fresh groundwater takes place in the Puebla Valley aquifer system, Mexico. The decline in the potentiometric surface due to the overexploitation of the groundwater induces this intrusion. This hydrological system comprises three aquifers located in Plio-Quaternary volcanic sediments and Mesozoic calcareous rocks. The hydraulic balance of the aquifer shows that the annual output exceeds the natural inputs by 12 million m³. Between 1973 and 2002, a drop in the potentiometric surface, with an 80 m cone of depression, was identified in a 5-km-wide area located southwest of the city of Puebla. Chemical analyses performed on water samples since 1990 have shown an increase in total dissolved solids (TDS) of more than 500 mg/L, coinciding with the region showing a cone of depression in the potentiometric surface. A three-dimensional flow and transport model, based on the hydrogeological and geophysical studies, was computed by using the MODFLOW and MT3D software. This model reproduces the evolution of the aquifer system during the last 30 years and predicts for 2010 an additional drawdown in the potentiometric surface of 15 m, and an increase in the geothermal water intrusion.     

Characterization of water bursting and discharge into underground mines with multilayered groundwater flow systems in the North China coal basin

A conceptual framework for characterization of water bursting and discharge into underground mines with multilayered groundwater flow systems is presented, based on the features of the site conditions and analyses of the water bursting and mine inundation events of the North China coal basin. Comprehensive analyses of the hydrogeological conditions for establishment of the three-dimensional groundwater flow systems of the North China coal basin revealed different vertical hydraulic connection paths or channels. These connections include karst collapse columns, fault or fracture zones, buried weathering zones, and fracture networks in aquitards, within the multilayered groundwater flow systems. Also examined, was the effect of the primary features of the flow system and those different connection paths on water bursting and discharge into the underground coal mines. It was demonstrated that appropriately identifying and adequately understanding the three-dimensional multilayered groundwater flow systems and those various vertical hydraulic connection mechanisms are critical for appropriately preventing water bursting hazards and predicting water discharge into underground mines. A valuable guideline is presented on characterization of water bursting and discharge into underground mines with multilayered groundwater flow systems.

---

Resumen Un cadre de travail conceptuel pour la caractérisation du jaillissement et de la vidange des eaux dans les mines à plusieurs niveaux d'écoulement est présenté, basé sur les conditions et l'analyse sur site du jaillissement des eaux et des inondations dans les bassins charbonneux du Nord de la Chine. L'analyse compréhensive des conditions hydrogéologiques des systèmes d'écoulement tridimensionnel de ces bassins, révèle des trajets ou des chenaux qui sont autant de connections hydrauliques verticales. Ces connections comprennent des effondrement karstiques en colonne, des zones de fractures et de failles, des zones d'altération, des réseaux de fractures dans les aquitards, dans le système hydrogéologique multicouche. L'influence des caractéristiques primaires du système d'écoulement et de ces différentes connections sur le jaillissement et la vidange dans les mines, est également examiné. Il a été démontré que l'identification appropriée et la compréhension adéquate du système d'écoulement souterrain multicouche et tridimensionnel, et des mécanismes variés de connection hydraulique verticale est critiquée pour prévenir de manière appropriée les risques de jaillissement et de vidange dans les mines. Des guidelines valorisables sont présentées, pour la caractérisation du jaillissement et de la vidange dans de tels systèmes.

---

Résumé Se presenta un marco conceptual para la de caracterización de la despresurización y descarga de agua a minas subterráneas con sistemas de acuíferos de múltiples niveles, el cual se basa en las condiciones del sitio, análisis de la despresurización de agua e inundaciones de minas en la cuenca de carbón del norte de la China.Un análisis comprehensivo de las condiciones hidrogeológicas para el establecimiento de los sistemas de flujo de agua de tri-dimensionales en la cuenca de carbón del norte de la China ha revelado diferentes canales hidráulicos verticales. Estas conexiones incluyen columnas de karst colapsadas, fallas o zonas de fracturas, zonas de regalita hundida y redes de fracturas en zonas de poca permeabilidad dentro de los sistemas de flujo de múltiples niveles.También se investigó el efecto de los rasgos primarios del sistema de flujo y los diferentes canales conectivos sobre la despresurización y descarga de agua a minas subterráneas. Se demostró que el entendimiento e identificación adecuada de los sistemas de acuíferos de múltiples niveles en tres dimensiones es crítico para prevenir apropiadamente la despresurización y descarga de agua a minas subterráneas. Se presentan lineamientos valiosos en relación con la despresurización y descarga de agua a minas subterráneas en sistemas de flujo de múltiple nivel.

     

New typologies for estuarine morphology

New theories to explain how tides and river flow determine estuarine bathymetries have been developed. The range of validity of these theories has been subsequently assessed against a recently available observational data set.Success in reproducing the evolution of estuarine bathymetries that has occurred over the last 10 000 years provides the basis for the translation, here, of these theories into new typologies. These then provide reference frameworks to enhance our perspective on existing morphologies and identify ‘anomalous’ estuaries. Further refinement of these new theories requires analyses of causal factors responsible for such anomalies drawing on classical morphological experience. These frameworks can also be used for calculating likely future bathymetric adjustments for prescribed changes in mean sea level, tidal amplitudes, river flow and sediment supply.     

Estimating the minimum in-stream flow requirements via wetted perimeter method based on curvature and slope techniques

Under the assumptions of triangular cross section channel and uniform stable flow, an analytical solution of the minimum ecological in-stream flow requirement (MEIFR) is deduced. Based on the analytical solution, the uncertainty of the wetted perimeter method is analyzed by comparing the two techniques for the determination of the critical point on the relationship curve between wetted perimeter, P and discharge, Q. It is clearly shown that the results of MEIFR based on curvature technique (corresponding to the maximum curvature) and slope technique (slope being 1) are significantly different. On the P-Q curve, the slope of the critical point with the maximum curvature is 0.39 and the MEIFR varied prominently with the change of the slope threshold. This indicates that if a certain value of the slope threshold is not available for slope technique, curvature technique may be a better choice. By applying the analytical solution of MEIFR in the losing rivers of the Western Route South-to-North Water Transfer Project in China, the MEIFR value via curvature technique is 2.5%-23.7% of the multi-year average annual discharge, while that for slope technique is 11%-105.7%. General conclusions would rely on the more detailed research for all kinds of cross-sections.     

Effects of fracture lineaments and in-situ rock stresses on groundwater flow in hard rocks: a case study from Sunnfjord, western Norway

Systematic field mapping of fracture lineaments observed on aerial photographs shows that almost all of these structures are positively correlated with zones of high macroscopic and mesoscopic fracture frequencies compared with the surroundings. The lineaments are subdivided into zones with different characteristics: (1) a central zone with fault rocks, high fracture frequency and connectivity but commonly with mineral sealed fractures, and (2) a damage zone divided into a proximal zone with a high fracture frequency of lineament parallel, non-mineralized and interconnected fractures, grading into a distal zone with lower fracture frequencies and which is transitional to the surrounding areas with general background fracturing. To examine the possible relations between lineament architecture and in-situ rock stress on groundwater flow, the geological fieldwork was followed up by in-situ stress measurements and test boreholes at selected sites. Geophysical well logging added valuable information about fracture distribution and fracture flow at depths. Based on the studies of in-situ stresses as well as the lineaments and associated fracture systems presented above, two working hypotheses for groundwater flow were formulated: (i) In areas with a general background fracturing and in the distal zone of lineaments, groundwater flow will mainly occur along fractures parallel with the largest in-situ rock stress, unless fractures are critically loaded or reactivated as shear fractures at angles around 30° to σ_H; (ii) In the influence area of lineaments, the largest potential for groundwater abstraction is in the proximal zone, where there is a high fracture frequency and connectivity with negligible fracture fillings. The testing of the two hypotheses does not give a clear and unequivocal answer in support of the two assumptions about groundwater flow in the study area. But most of the observed data are in agreement with the predictions from the models, and can be explained by the action of the present stress field on pre-existing fractures.     

3D numerical modelling of fluid flow in the Val-d’Or orogenic gold district: major crustal shear zones drain fluids from overpressured vein fields

Fluid flow patterns have been determined using oxygen isotope isopleths in the Val-d’Or orogenic gold district. 3D numerical modelling of fluid flow and oxygen isotope exchange in the vein field shows that the fluid flow patterns can be reproduced if the lower boundary of the model is permeable, which represents middle or lower crustal rocks that are infiltrated by a metamorphic fluid generated at deeper levels. This boundary condition implies that the major crustal faults so conspicuous in vein fields do not act as the only major channel for upward fluid flow. The upper model boundary is impermeable except along the trace of major crustal faults where fluids are allowed to drain out of the vein field. This upper impermeable boundary condition represents a low-permeability layer in the crust that separates the overpressured fluid from the overlying hydrostatic fluid pressure regime. We propose that the role of major crustal faults in overpressured vein fields, independent of tectonic setting, is to drain hydrothermal fluids out of the vein field along a breach across an impermeable layer higher in the crust and above the vein field. This breach is crucial to allow flow out of the vein field and accumulation of metals in the fractures, and this breach has major implications for exploration for mineral resources. We propose that tectonic events that cause episodic metamorphic dehydration create a short-lived pulse of metamorphic fluid to rise along zones of transient permeability. This results in a fluid wave that propagates upward carrying metals to the mineralized area. Earthquakes along crustal shear zones cause dilation near jogs that draw fluids and deposit metals in an interconnected network of subsidiary shear zones. Fluid flow is arrested by an impermeable barrier separating the hydrostatic and lithostatic fluid pressure regimes. Fluids flow through the evolving and interconnected network of shear zones and by advection through the rock matrix. Episodic breaches in the impermeable barrier along the crustal shear zones allow fluid flow out of the vein field.     

Design of Inclined Covers with Capillary Barrier Effect

A design procedure is proposed to minimize water infiltration into landfills by optimizing the water diversion length of inclined covers with capillary barrier effect (CCBE). This design procedure is based on a conceptual, mathematical and numerical approach and aims at selecting materials and optimizing layer thickness. Selection among candidate materials is made based on their hydraulic conductivity functions and on a threshold infiltration rate imposed on the designer. The capillary break layer (CBL; bottom layer) is characterized by a weak capillarity, while the moisture retention layer (MRL; upper layer) is characterized by a compromise between strong capillarity and high hydraulic conductivity. The thickness of the CBL corresponds to the height where suction reaches its maximum value for a given infiltration rate. This height can be calculated using the Kisch [Géotechnique 9 (1959)] model. The optimal thickness of the MRL is determined by applying an adaptation of the Ross [Water Resources Research 26 (1990)] model. The results obtained using the proposed design procedure were compared to those obtained from numerical simulations performed using a finite element unsaturated seepage software. The procedure was applied for two cover systems; one where deinking by-products (DBP) were used as MRL and sand as CBL and another where sand was used as MRL and gravel as CBL. Using this procedure, it has been shown that an infiltration control system composed of thin layers of sand over gravel is highly efficient in terms of diversion length and that its efficiency can be enhanced by placing a hydraulic barrier – such as a layer of DBP – above the MRL.     

The Alcamayo and Cedrobamba catastrophic debris flow (January, March and April 2004) in Machupicchu area—Peru

A debris flow originating from the Alcamayo River on 10th April 2004 destroyed a part of the town of Aguas Calientes, resulting in 11 victims, and with serious affects to the tourist flow to the Machupicchu inka citadel. On the same day, as well as in January and March 2004, other similar phenomena occurred on the Cedrobamba and Leonchayoq Rivers, affecting the railway and an electrical tower, and disrupting the train service.     

Interpreting tracer breakthrough tailing in a conduit-dominated karstic aquifer

Breakthrough tailing has been observed during dye-tracing recovery tests in the Norville aquifer system (chalk), France. Karst-conduit flow and transport parameters were assessed using two different interpretative methods: the linear graphical method and the Chatwin method (implemented in the Qtracer2 program). The linear graphical method was used to model the observed tailing effects, which was explained by a second smaller delayed breakthrough curve. By comparing the results of tracer-test interpretation for the two methods, it was possible to relate the area of this second curve to the importance of turbulent flow in spring discharge. The more turbulent the flow, the less important the contribution of the second breakthrough curve and the tailing effect. The observed tailing could possibly be controlled by hydrodynamics to a greater extent than usually expected, the tailing effects being mostly attributed to diffusion phenomena. Tailing effects were expected to increase with discharge and the piezometric level, which would have resulted in overpressure in conduits, fissure flooding, etc. Instead, breakthrough tailing tended to disappear with increasing aquifer discharge, which would support the hypothesis of there being mostly hydrodynamic-controlled tailing effects instead of matrix- or fissure-diffusion.An erratum to this article can be found at