Analytical method of radiation by a wave energy device with dual rectangular floating bodies

The system with one floating rectangular body on the free surface and one submerged rectangular body has been applied to a wave energy conversion device in water of finite depth. The radiation problem by this device on a plane incident wave is solved by the use of an eigenfunction expansion method, and a new analytical expression for the radiation velocity potential is obtained. The wave excitation force is calculated via the known incident wave potential and the radiation potential with a theorem of Haskind employed. To verify the correctness of this method, an example is computed respectively through the bound element method and analytical method. Results show that two numerical methods. are in good agreement, which shows that the present method is applicable. In addition, the trends of hydrodynamic coefficients and wave force are analyzed under different conditions by use of the present analytical method.     

The anomalous radiation force of light on a left-handed material

This paper derives the force of the electromagnetic radiation on left-handed materials (LHMs) by a direct application of the Lorentz law of classical electrodynamics. The expressions of radiation force are given for TE-polarised and TM-polarised fields. The numerical results demonstrate that electromagnetic waves exert an inverse lateral radiation force on each edge of the beams, that is, the lateral pressure is expansive for TE-polarised beams and compressive for TM-polarised beams. The investigation of the radiation force will provide insights into the fundamental properties of LHMs and will provide to better understanding of the interaction of light with LHMs.     

Improvement of the axial trapping effect using azimuthally polarised trapping beam

A dual optical tweezers system, which consists of a doughnut mode optical tweezer (DMOT) with the azimuthally polarised trapping beam and a solid mode optical tweezer (SMOT) with the Gauss trapping beam was constructed to compare the axial trapping effect of DMOT and SMOT. The long-distance axial trapping of ST68 microbubbles (MBs) achieved by DMOT was more stable than that of SMOT. Moreover the axial trapping force measured using the viscous drag method, was depended on the diameter of the particle, the laser power, and the numerical aperture (NA) of the objective lens. The measurement of the axial trapping force and the acquisition of CCD images of trapping effect confirmed that the DMOT showed excellent axial trapping ability than SMOT. A simple and effective method is developed to improve axial trapping effect using the azimuthally polarized beam as trapping beam. This is helpful for the long-distance manipulating of particles especially polarised biological objects in axial direction.     

Tsunami-like solitary waves impinging and overtopping an impermeable seawall: Experiment and RANS modeling

This study investigates tsunami-like solitary waves impinging and overtopping an impermeable trapezoidal seawall on a 1:20 sloping beach. New laboratory experiments are performed for describing three typical cases: a turbulent bore rushes inland and subsequently impacts and overtops the seawall (Type 1); a wave directly collapses on the seawall and then generates overtopping flow (Type 2); and, a wave straightforwardly overtops the seawall crown and collapses behind the seawall (Type 3). A two-dimensional volume of fluid (VOF) type model called the COBRAS (COrnell BReaking And Structure) model, which is based on the Reynolds-Averaged Navier–Stokes (RANS) equations and the k–ε turbulence closure solver, is validated by experimental data and then applied to investigate wave dynamics for which laboratory data are unavailable. Additionally, a set of numerical experiments is conducted to examine the dynamic wave acting force due to waves impacting the seawall. Effects of wave nonlinearity and freeboard are elucidated. Special attention is given to a distinct vortex evolutionary behavior behind the seawall, in which the dynamic properties of entrapped air-bubbles are briefly addressed experimentally and numerically.     

Experimental Investigation of Irregular Wave Uplift Force on Deck of Exposed High-Pile Jetties

A laboratory setup was developed to investigate irregular wave uplift loads on exposed high-pile jetties.It is shown that the dimensionless uplift load increases to the maximum with an increasing relative clearance and then decreases.The relative clearance corresponding to the peak force is linked to a range from 0.4 to 0.8.When the relative clearance exceeds a certain value,the wave can not reach the underside of the deck and the force becomes zero.Distinct trends of dimensionless force with a relative width of deck show that the force tends to decrease as the relative deck width increases,and then the decrease slows down after the relative deck width increases or decreases to a certain value.The pressure distribution length associated with the maximum uplift force is equivalent to the wave contact width x.When x is larger than the width of deck B,it is taken as B.The statistical distribution of loads obeys the Weibull distribution.The results from the analyses of the real data suggest a new dimensionless prediction model on wave-in-deck uplift loads and the conversion ratio between wave loads at different exceedance probabilities.A comparison is made between the new prediction model and the existing widely used three prediction models.These results are used as useful references for structural design of the jetty.     

Non-equilibrium flocculation characteristics of fine-grained sediments in grid-generated turbulent flow

Results are presented from a series of settling column experiments investigating temporal variations in the flocculation characteristics of purely cohesive (kaolin clay) sediment suspensions and cohesive (kaolin) and non-cohesive (fine sand) sediment fraction mixtures. Experimental runs were conducted under controlled hydrodynamic conditions generated by a rigid array of in-phase oscillating grids. The results indicated that rapid initial floc aggregation occurred under low turbulent shear rates, with peak maximal and root-mean-square (r.m.s.) floc sizes (∼ 400 μm and ∼ 200 μm, respectively) attained after relatively short time periods, before reducing with time. By contrast, lower aggregation rates and smaller floc sizes were observed under higher shear conditions, with flocs retaining suspended in the settling column for longer time scales due to the increased turbulence. The mud input concentration displayed some correlation with maximal and r.m.s. floc sizes at higher shear rates but no correlation was apparent at low shear rates. This observed floc behaviour may be attributed to the differences in concentration gradients at high and low shear rates that affect both floc settling rate and time required for flocs to attain equilibrium size. The addition of the fine sand fraction to the kaolin clay suspension reduced both the initial floc formation (i.e. aggregation) rate and the maximal and r.m.s. floc sizes attained throughout the experiments. The reduction in maximal floc sizes appeared to be enhanced by an increase in the ratio of fine sand to kaolin clay content within the mixture.     

佛山市顺德区飞鹅山Ⅲ号滑坡形成机理与防治技术

采用工程地质钻探、物探、地质测绘及室内试验等技术方法探讨飞鹅山Ⅲ号滑坡形成机理与防治技术。结果表明：1）滑坡体主要岩性为泥质粉砂岩,飞鹅山滑坡属于新形成的深层中型牵引式滑坡,在平面上呈圈椅状。2）滑坡属于双层滑面滑坡,主滑面以中型深层滑坡为主,主滑体上部发育中型中厚层滑坡。3）滑坡产生的原因为：(1)泥质粉砂岩倾向与坡向基本一致,且岩层倾角为中等倾角;(2)人工开挖使坡脚形成高陡临空面,抗滑力大为降低;(3)雨水沿层面及节理裂隙入渗至坡体深部,大大增加岩土体容重,同时泥质粉砂岩遇水软化,抗剪强度显著降低。4）结合该滑坡区地质环境条件,采用坡面削坡+锚杆（索）+格构梁+双排预应力锚拉抗滑桩+三维网植草绿化+截排水+毛石挡墙的综合治理方法进行防治,监测结果显示该滑坡变形及位移已得到有效控制,整治效果良好。     

用王水分解含金矿物的机理探讨

本文从理论上对王水分解含金矿物的机理进行了探讨。在非标准状态下,温度、压力不变,改变体系中物质的浓度、酸度条件,用能斯特公式求解体系中HNO_3和Au的电极电位值,而后用EMF(电池电动势)根据规则判断反应是否可以进行。经理论计算,结论是可行的。另外由于Au~(3 )和Cl~-大量存在时,生成稳定的[AuCl_4]~-,经过络合作用,促使了HNO_3和Au的氧化还原反应,最终使含金矿物溶解完全。作者认为王水同含金矿物反应的机理是:氧化和络合的双重作用。     

临汾裂谷现代构造应力场特征及其数值模拟

根据断层错动资料和小地震的平均震源机制解结果,运用弹性力学的叠加原理,对临汾裂谷作三维有限元模拟,反演其构造应力场。结果表明,临汾裂谷现今主要受南东东-北西西向引张力作用,辅之以北东-南西方向的挤压,同时在裂谷的中心叠加有底层拖曳的深部作用。     

川西地区劳动就业研究

以川西作为研究区域,对农村劳动力转移或非农就业从自然—人文相结合的观点进行了探讨。