Time to market in the CDM: variation over project characteristics and time

Not only is the carbon market inundated with Certified Emissions Reductions (CERs) issued by successful projects, it is also littered with failed projects, that is, projects that either fail to be registered under the Clean Development Mechanism (CDM) or projects that have been successfully registered but fail to issue CERs. By relying on a novel application of survival analysis in the context of the CDM, this article shows that half of all projects that start the Global Stakeholder Process fail to issue CERs, while the other half have a median time to market of four years. Furthermore, it is shown that some of the best projects, in terms of being additional, are those that are least likely to make it to market, whereas some of the worst projects, in terms of not being additional, are the ones that are most likely to make it to market. This presents a fundamental challenge for the CDM and future offset schemes that rely on the same design as the CDM. In contrast with previous studies, it is shown that, when project characteristics are controlled for, not all durations measured along the CDM project cycle have increased over time.

Policy relevance

This article develops a novel method for analysing durations measured along the CDM project cycle that avoids the biases of previous studies, and corrects for some misconceptions of what the delays faced by CDM projects are and how these delays have changed over time. Developing an understanding of the delays is important in order not to draw the wrong lessons from the CDM experience. As the leading example of an offset scheme, both in terms of geographical scope and sectoral coverage, and some would say institutional complexity, the CDM serves as a benchmark and reference for all future offset schemes, among others, for the New Market Mechanisms (NMMs) and the Chinese domestic offset programme. While the NMMs are still very much in development, China has announced that it will rely on the methodologies and procedures developed under the CDM for generating offsets for their regional carbon trading schemes.     

Performance of renewable energy technologies under the CDM

While many different greenhouse gas (GHG) mitigation technologies can be implemented under the Clean Development Mechanism (CDM), renewable energy technologies (RETs), in particular, are often viewed as one of the key solutions for achieving the CDM's goals: host-country sustainable development and cost-efficient emissions reductions. However, the viability of emission reduction projects like RETs is technology- and country-specific. To improve the CDM with respect to the diffusion of RETs, it is crucial to understand the factors that ultimately drive or hinder investments in these technologies. This study develops a methodology based on project-level, regional and global variables that can systematically assess the financial and environmental performance of CDM projects in different country contexts. We quantitatively show how six RETs (PV, wind, hydro, biomass, sewage, landfill) are impacted differently by the CDM and how this impact depends on regional conditions. While sewage and landfill are strongly affected independently of their location; wind, hydro and biomass projects experience small to medium impacts through the carbon price, and strongly depend on regional conditions. PV depends more on regional conditions than on the carbon price but is always unprofitable. Furthermore, we determine the carbon prices necessary to push these six RETs to profitability under various regional conditions. Based on these results, we derive policy recommendations to advance the interplay between international and domestic climate policy to further incentivize GHG emission reductions from RETs.     

Convergence or divergence?: Status and prospects for US climate strategy

The objective of this paper is to assess recent developments and prospects for future changes in United States (US) climate strategy. In doing so, the paper explores some of the key factors that have shaped strategies and policies to date, distinguishing between factors related to institutional and governance structures, linkages between science and policy, energy technology and the role of interest groups. Against this background, the paper attempts to explore future development paths for US climate policy. More specifically, the paper assesses opportunities for policy changes compared to the preferences of the current administration, and the prospects for future linkages between US and international climate change strategies. In brief, the paper argues that substantial changes are unlikely to take place in the near to medium term, leaving open, however, the possibility of wide-ranging changes in domestic politics or major incidents that could facilitate a shift in the perceived need for near-term action.     

水工工程CDM体的陆上施工

以青岛某水工工程为例,介绍了在海中施工CDM桩护岸的主要施工技术和施工方法。工程采用了CDM桩的海中支架设计,介绍了CDM桩块体机具选择,CDM桩配合比设计及最终CDM块体的成桩咬合布置、水下CDM成桩主要施工技术参数和工艺。为以后类似CDM桩施工提供借签。     

National ownership in the implementation of global climate policy in Uganda

Abstract

This article explores the history, from a developing country perspective, of how external interventions to implement global policies on the Climate Convention and the Clean Development Mechanism (CDM) have been integrated into national development policy frameworks in the period 1990–2005. The main question asked is to what extent external interventions have formed part of a country-driven approach in Uganda. The conflicting national and global priorities concerning the need for adaptation to the impacts of climate change versus the need for global mitigation of greenhouse gases (GHGs) are explored first. Against this background, Uganda's policy response to climate change is reviewed. National climate policies are found not to exist, and the implementation of global policies is not integrated into national policy frameworks, partly due to conflicting national and global priorities. Given limited national awareness and the fact that climate policy is marginal compared to other national interests in Uganda, the experiences with donor support for the implementation of global climate policy nationally are analysed. This article demonstrates that neither national policies nor national management of donor support have secured a country-driven approach to external interventions in Uganda.     

A spatial approach to baseline and leakage in CDM forest carbon sinks projects

Abstract

Forestry projects under the Clean Development Mechanism (CDM) face specific challenges with regard to determination of a baseline for carbon sequestration. We propose a semi-standardized approach called PARAPIA for calculation of a baseline that is built on the concept of a reference area around the project area whose land-use characteristics determine the baseline scenario. The land-use shares in the reference area are checked at each verification. Baseline carbon stocks are then derived ex post using the average carbon content of each land-use type. The reference area is between five and ten times larger than the project area. To determine indirect effects (the so-called ‘leakage’), a political influence area such as province or state is assessed with regards to migration flows due to the project and related emissions.     

Past as prologue: an innovation-diffusion approach to additionality

The ‘additionality’ criterion for the Clean Development Mechanism (CDM) (which is key to ensuring that CDM projects lead to real and additional emission reductions) has been a topic of much analysis and discussion. A number of different approaches, including those based on financial, barrier and market-penetration criteria, have been suggested as a test for additionality. A simple test for additionality is proposed that draws on the framework of the diffusion of innovations, especially the risk profile of adopters of new technologies or innovations. This approach has the potential to streamline the assessment for additionality, although it will require data on the rate of implementation of specific technologies or innovations.     

Can CDM monitoring requirements be reduced while maintaining environmental integrity?

Monitoring, reporting, and verification (MRV) requirements in the Clean Development Mechanism (CDM) are perceived to be of high quality, but also complex and stringent. Only one-third of the registered projects successfully managed initial verification and already received carbon credits. The time required to achieve first issuance remains high despite considerable improvements in other CDM project cycle steps. This leads to the question of whether MRV provisions in the CDM represent barriers that could be lowered while ensuring the CDM's integrity. The CDM requirements are compared with the MRV provisions of the EU Emission Trading System (EU ETS). The comparison shows that CDM–MRV provisions are often stricter and less flexible compared to similar provisions in the EU ETS. Due to structural differences between the EU ETS and the CDM, some different MRV approaches are justified and reflect the CDM's disparate objectives and complexity. It is found that some CDM provisions result in barriers which seem avoidable and do not contribute to the CDM's environmental integrity. Recommendations are made for CDM-specific improvements and general structural changes to improve cost-efficiency and reduce uncertainty with relevance to policy developments around future market mechanisms.     

Linkages between climate change and sustainable development

Abstract

Climate change does not yet feature prominently within the environmental or economic policy agendas of developing countries. Yet evidence shows that some of the most adverse effects of climate change will be in developing countries, where populations are most vulnerable and least likely to easily adapt to climate change, and that climate change will affect the potential for development in these countries. Some synergies already exist between climate change policies and the sustainable development agenda in developing countries, such as energy efficiency, renewable energy, transport and sustainable land-use policies. Despite limited attention from policy-makers to date, climate change policies could have significant ancillary benefits for the local environment. The reverse is also true as local and national policies to address congestion, air quality, access to energy services and energy diversity may also limit GHG emissions. Nevertheless there could be significant trade-offs associated with deeper levels of mitigation in some countries, for example where developing countries are dependent on indigenous coal and may be required to switch to cleaner yet more expensive fuels to limit emissions. The distributional impacts of such policies are an important determinant of their feasibility and need to be considered up-front. It follows that future agreements on mitigation and adaptation under the convention will need to recognise the diverse situations of developing countries with respect to their level of economic development, their vulnerability to climate change and their ability to adapt or mitigate. Recognition of how climate change is likely to influence other development priorities may be a first step toward building cost-effective strategies and integrated, institutional capacity in developing countries to respond to climate change. Opportunities may also exist in developing countries to use regional economic organisations to assist in the design of integrated responses and to exploit synergies between climate change and other policies such as those designed to combat desertification and preserve biodiversity.

© 2002 Elsevier Science Ltd. All rights reserved.     

Future restrictions for sinks in the CDM How about a cap on supply?

Abstract

The first commitment period of the Kyoto Protocol is expected to result in only a small role for the Clean Development Mechanism (CDM), including afforestation and reforestation projects. Wide ranging concerns regarding sinks in the CDM have been reflected in the Marrakech Accords capping the total amount of emission offsets from sinks projects to be used by Annex I countries. Decisions about the second commitment period and beyond are likely to be of far greater importance for these projects.

This paper contributes to the discussion on how caps on sinks under the CDM could be used to obtain overall improved outcomes for developing countries. We examine two distinctive ways in which quantitative caps on sinks in the CDM can be implemented: one, restricting the use of sinks CERs to meet targets, as under the Marrakech Accords (a cap on demand); and two, restricting supply of sink CERs using a quota system. We argue in favour of a supply side cap, if Parties are to preserve the idea of limiting sinks in the CDM. Limiting the supply of credits could lead to better financial outcomes for developing countries as a whole, make higher-cost projects viable which may have better sustainability impacts, and provide an alternative to deal with equity concerns between developing countries.