Prediction of Load Carrying Capacity of Corroded Reinforced Concrete Beam

A novel method for prediction of the load carrying capacity of a corroded reinforced concrete beam (CRCB) is presented in the paper. Nine reinforced concrete beams, which had been working in an aggressive environment for more than 10 years, were tested in the laboratory. Comprehensive tests, including flexural test, strength test for corroded concrete and rusty rebar, and pullout test for bond strength between concrete and rebar, were condueted. The flexural test results of CRCBs reveal that the distribution of surface cracks on the beams shows a fractal behavior. The relationship between the fractal dimensions and mechanical properties of CRCBs is then studied. A prediction model based on artificial neural network (ANN) is established by the use of the fractal dimension as the corrosion index, together with the basic intbrmation of the beam. The validity of the prediction model is demonstrated through the experimental data, and satisfactory resuits are achieved.     

The buckling of plastic oblate hemi-ellipsoidal dome shells under external hydrostatic pressure

The paper presents a theoretical and an experimental investigation into the buckling of seven oblate hemi-ellipsoidal dome shells under external hydrostatic pressure. Four of the shells were made in glass reinforced plastic and three were made from a thermosetting plastic called solid urethane plastic. All the vessels were tested to destruction. The theoretical study was made with the aid of a non-linear finite element solution, where both geometrical and material non-linearity were allowed for. Good agreement was found between experiment and theory for all the vessels. The very oblate domes failed axisymmetrically. Theoretical convergence was good for the more oblate domes but it was not as good as for the less oblate domes. This may have been because the less oblate domes did not fail in a classical axisymmetric manner as was expected. This work is of much importance in ocean engineering.     

底部浮泥表层推移速度分布的ADCP—GPS估测方法

ADCP对底跟踪走航观测的流速数据中包含水体底部浮泥、底沙运动信息,对比GPS定位方法算出的水体流速数据可以分离出浮泥相对于GPS定位的运动信号,从而达到对底质推移观测的目的。     

Two-Dimensional Mathematical Model of Tidal Current and Sediment for Oujiang Estnary and Wenzhou Bay

A 2-D mathematical model of tidal current and sediment has been developed for the Oujiang Estuary and the WenzhouBay. This model accomodates complicated features including multiple islands, existence of turbidity, and significant differ-ence in size distribution of bed material. The governing equations for non-uniform suspended load and bed load transport arepresented in a boundary-fitted orthogonal curvilinear coordinate system. The numerical solution procedures along with theirinitial conditions, boundary conditions, and movable boundary technique are presented. Strategies for computation of thecritical condition of deposition or erosion, sediment transport capacity, non-uniform bed load discharge, etc. are suggested.The model verification computation shows that, the tidal levels computed from the model are in good agreement with the fielddata at the 18 tidal gauge stations. The computed velocities and flow directions also agree well with the values measuredalong the totally 52 synchronously observed verticals distributed over 8 cross sections. The computed tidal water throughputsthrough the Huangda‘ao cross section are close to the measured data. And the computed values of bed deformation fromYangfushan to the estuary outfall and in the outer-sea area are in good agreement with the data observed from 1986 to 1992.The changes of tidal volumes through the estuary, velocities in different channels and the bed form due to the influence of thereclamation project on the Wenzhou shoal are predicted by means of this model.     

An Analysis on Limit Load for Corroded Submarine Pipelines

1 .Introduction Submarine pipelines are one of the safest and the least environmentally disruptive means for ma-rine gas or oil transport . With the development of exploitation of submarine oil or gas ,the safety ofsubmarine pipelines has becomethe major …     

Treatment of Hydrodynamic Loading for Random Sea State

- In order to employ cost effective frequency domain analysis for off-shore structures treatment of hydrodynamic loading is essential. Drag and inertia dominated, resonating and antiresonating cases under random sea states are analyzed to highlight the implications and relative merits of four salient linearization techniques.     

蚀变岩的蠕变特性研究

以某水电站工程项目为依托,利用自行研制的试验仪器对大量的蚀变岩做了单轴压缩流变试验。通过对试验数据的处理和分析,得到了该种岩石的流变,并对蚀变岩的蠕变特性进行了分析总结,为工程设计提供了试验依据。     

1786年康定地震形变特征的初步研究

本文对鲜水河断裂带南东段,康定断裂地震的形变带进行了分析。认为,地震形变带主要由发育于地形斜坡上的线性坡中槽或垄岗组成。形变带具分段特点,单条长850—1500米,呈右阶“斜列式”展布,中段(极震区)一带为现状型。其中的破裂面具正断兼扭动特点。空间特征上,坡中槽一侧的交替上升变化是依次、轮换出现的,它是地震断层运动屈曲作用(Fault buckling)导致地表变形的反映。这种形变现象与该带北西段(炉霍段)走滑型地震的形变带相比有明显的差异,也表明鲜水河断裂带北西、南东两段的地震破裂方式是不尽相同的,它为同一走滑带不同地段运动特征的差异提供了证据。     

PDC钻头切削齿破岩载荷规律的分析

对PDC钻头冠部形状及不同的布齿密度和切削齿在不同的磨损状态下对PDC钻头切削齿受力的影响进行了分析；用相邻的3个切削齿之间的关系(不同的切削齿与切削齿之间的径向距离和切削齿之间的高度差)来分析PDC钻头冠部形状和切削齿布齿密度对切削齿受力的影响，以及将切削齿的磨损状态简化成与切削齿在钻头上装配方向垂直的平面来分析切削齿磨损状态对切削齿受力的影响。     

自重湿陷性黄土地区桩基设计探讨

根据自重湿陷性黄土的特点、《湿陷性黄土地区建筑规范》（GB50025—2004）和《建筑桩基技术规范》（JGJ94—94）中关于桩基设计的对比分析，通过自重湿陷性黄土场地工程实例分析计算，依据负摩擦产生的机理——中性点理论，论述了自重湿陷性黄土场地中桩基设计应考虑中性点，而不应全部计入负摩阻的观点。