Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.     

Freely floating-body simulation by a 2D fully nonlinear numerical wave tank

Nonlinear interactions between large waves and freely floating bodies are investigated by a 2D fully nonlinear numerical wave tank (NWT). The fully nonlinear 2D NWT is developed based on the potential theory, MEL/material-node time-marching approach, and boundary element method (BEM). A robust and stable 4th-order Runge–Kutta fully updated time-integration scheme is used with regriding (every time step) and smoothing (every five steps). A special φ_n-η type numerical beach on the free surface is developed to minimize wave reflection from end-wall and wave maker. The acceleration-potential formulation and direct mode-decomposition method are used for calculating the time derivative of velocity potential. The indirect mode-decomposition method is also independently developed for cross-checking. The present fully nonlinear simulations for a 2D freely floating barge are compared with the corresponding linear results, Nojiri and Murayama’s (Trans. West-Jpn. Soc. Nav. Archit. 51 (1975)) experimental results, and Tanizawa and Minami’s (Abstract for the 6th Symposium on Nonlinear and Free-surface Flow, 1998) fully nonlinear simulation results. It is shown that the fully nonlinear results converge to the corresponding linear results as incident wave heights decrease. A noticeable discrepancy between linear and fully nonlinear simulations is observed near the resonance area, where the second and third harmonic sway forces are even bigger than the first harmonic component causing highly nonlinear features in sway time series. The surprisingly large second harmonic heave forces in short waves are also successfully reproduced. The fully updated time-marching scheme is found to be much more robust than the frozen-coefficient method in fully nonlinear simulations with floating bodies. To compare the role of free-surface and body-surface nonlinearities, the body-nonlinear-only case with linearized free-surface condition was separately developed and simulated.     

船舶受冲击力作用时的水动力试验研究

根据冲量相似的要求进行船舶在冲击作用下的模型试验，并将模型试验结果与理论计算及实际试验进行了对比和分析。     

热带大西洋年际和年代际变率的时空结构模拟

使用美国夏威夷大学发展的中等复杂程度海洋模式(IOM)在给定表面强迫条件下模拟了热带大西洋上层海洋年际和年代际变率的时空结构.利用NCEP的41a(1958～1998年)逐月平均表面资料作为强迫场,积分海洋模式41a作为控制试验,并利用模式分别做动量(风应力)通量和热量通量无异常变化的平行试验,与控制试验作比较.对3组试验模拟上层海洋变率状况的比较,并按年际和年代际时间尺度分别分析,揭示表面风应力和热通量异常对海表面温度和温跃层深度变化的影响,并比较了其影响的相对重要性.结果表明模式成功地模拟出了热带大西洋上层海洋的变率.模式模拟的海表面温度年际变化主要表现为弱ENSO型,年代际变化表现为南、北大西洋变化相反的偶极子型.在年际时间尺度上,热力强迫和动力强迫对海表温度变化都有贡献,其中赤道外海表面温度异常(SSTA)变化主要由热通量异常引起,而近赤道SSTA的变化主要由动量异常强迫引起.在年代际时间尺度上,热通量强迫的作用远比动量强迫重要.模式不仅能够模拟SST在年际和年代际时间尺度上的变率,还能够模拟温跃层深度在年际和年代际时间尺度上的变率.年际和年代际时间尺度上,温跃层深度的变率主要由动量异常决定,热通量异常强迫的贡献很小.     

A New Probability of Detection Model for Updating Crack Distribution of Offshore Structures

1 .IntroductionNondestructiveinspection (NDI)isveryimportantforensuringthereliabilityofoffshorestructuresintheirservicelives (Lauraetal.,1 996 ) .Itiswellknownthatdetectionofflawsinvolvesconsider ablestatisticaluncertainties.Asaresult,theprobabilityofdetection (POD)forallflawsofagivensizehasbeenusedintheliteraturetodefinethecapabilityofaparticularNDItechniqueinagivenen vironment.SincethedataofPODusuallyscatterlargely ,itisdifficulttodeterminewhichmodelfitstheavailabledatabest.Thismodelun…     

A method to estimate the forces exerted by internal solitons on cylindrical piles

Internal soliton is the large amplitude wave existing in the pycnocline, induced by internal tide in the condition of special bottom topography. During its propagation process, the induced disturbance can bring about strong convergence of sea water and sudden strong current (wave-induced-current), which can cause severe threat to the ocean engineering structures, such as oil drilling platform and pipeline. In this paper, Morison’s empirical method, modal separation and regression analyses are introduced to estimate the forces and torques exerted by internal soliton on cylindrical piles. As an example, a limited set of observational data recording a passage of the internal soliton near Dongsha Islands is used to estimate the horizontal velocity and its acceleration in a vertical section for computing the force and torque on a supposed pile, and the estimation results are reasonable. It is shown that, the higher number of the modes retained in the calculation, the better the estimation of velocity profile fits the observational one. A better overall approximation to the real solution can be reached if there are more observational current data acquired in a whole vertical profile.     

A note on estimation of the Jacobian elliptic parameter in cnoidal wave theory

A new and simple calculating technique for the Jacobian elliptic parameter is presented in this study. The technique is very useful in generating a train of cnoidal waves in both laboratory and numerical wave tanks. Upon specification of water depth, the wave height and either the wave period or the wavelength, the proposed technique uses the Newton–Raphson method to estimate the Jacobian elliptic parameter directly, without trial and error procedures or look-up in tables. It is shown that the technique provides equally accurate results as the ad hoc methods previously used.     

Dynamic properties of green water event in the overtopping of extreme waves on a fixed dock

A statistical model is developed to predict wave overtopping volume and rate of extreme waves on a fixed deck. The probability density function for the volume and rate of overtopping water are formulated based on the truncated Weibull distribution with the assumption of local sinusoidal profile for small amplitude waves. Sensitivity to the wave nonlinearity parameter and deck clearance is discussed. The statistical model is compared to laboratory data of the instantaneous free surface elevation measured in front of a fixed deck, and overtopping volume and overtopping rate measured at the leading edge of the deck. The statistical theory compared well with the measured exceedance probability seaward of the deck. The model prediction of the exceedance probability of deck overtopping gave qualitatively good agreement for large overtopping values.     

Modelling of periodic wave transformation in the inner surf zone

In this paper, we analyse the ability of the nonlinear shallow-water (NSW) equations to predict wave distortion and energy dissipation of periodic broken waves in the inner surf zone. This analysis is based on the weak-solution theory for conservative equations. We derive a new one-way model, which applies to the transformation of non-reflective periodic broken waves on gently sloping beaches. This model can be useful to develop breaking-wave parameterizations (in particular broken-wave celerity expression) in both time-averaged wave models and time-dependent Boussinesq-type models. We also derive a new wave set-up equation which provides a simple and explicit relation between wave set-up and energy dissipation. Finally, we compare numerical simulations of both, the NSW model and the simplified one-way model, with spilling wave breaking experiments and we find a good agreement.     

Application of LICOM to the numerical study of the water exchangebetween the South China Sea and its adjacent oceans

1 IntroductionThe South China Sea (SCS) is the largestmarginal sea in the western Pacific (see Fig. 1). It con-nects with the SCS through the Taiwan Strait, with thePacific through the Luzon Strait, with the Sulu Seathrough the Mindoro and Balabac Straits and with theJava Sea and Andaman Sea through the Sunda Shelf(For convenience, here we refer to the section at 1.5°N,Fig. 2). It is shown that the seasonal SCS circulation ismostly affected by the summer/winter monsoon, andthe no…