甘肃北祁连山寒山金矿床控矿条件与成矿模式

通过对该矿床成矿地质背景、矿床地质特征、成矿标志及控矿因素等诸方面分析，指出成矿物质主要来源于下奥陶统岛弧钙碱性安山—英安质火山碎屑岩，矿体受多级断裂裂隙系统的控制，且主要定位于韧—脆性剪切带内的强片理化带中，成矿作用发生于碰撞造山作用挤压—伸展转变期，花岗闪长岩、闪长岩等造山期中酸性岩体侵位期间及其以后，深部岩浆房或中酸性侵入体主要为矿床形成提供了热驱动力，矿床成因类型属与火山岩有关的构造蚀变岩型金矿床。在此基础上，总结归纳了该矿床的成矿模式与综合找矿标志。     

小秦岭金矿含金石英脉中石英晶体微形貌研究

利用微分干涉显微镜等手段对小秦岭金矿含金石英脉中不同成矿阶段的石英晶体微形貌进行了研究。石英晶体{101^-1}、{011^-1}、{101^-0}单形晶面上不同特征的微形貌对了解石英晶体的生长机理、生长速率、生长环境的变化及成矿溶液的过饱和度具有重要意义，同时也可提供成矿阶段划分及晶体生长时热力学条件的信息。     

NNR constraint in ITRF2000 and the new global plate motion model NNR-ITRF2000VEL

There are 54 sites employed by ITRF2000 for ITRF2000 orientation. The deficiencies are obvious. First, these sites cannot well represent the rotation rate of the earth crust because there is no selected site in five out of fourteen tectonic plates and three of fourteen plates only have one site each. Second, the total angular momentum of the crust is non-vanishing in ITRF2000, even though it is declared that No Net Rotation (NNR) with respect to NNR-NUVEL1A is imposed on ITRF2000 construction according to the documentations of ITRF2000. So the NNR condition in conventional terrestrial reference system (CTRS) realization cannot be satisfied in ITRF2000. In this paper, the criteria of site selection for estimating the Euler vectors are suggested; the Tisserand system constraint equation in ITRF construction is derived; and as a product, the global plate motions can be obtained from the ITRF2000 construction.     

Movement and strain conditions of active blocks in the Chinese mainland

The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.     

场地条件对地震动相干函数的影响

本通过弹性半空间内位错源的数值解法研究了曲岩地震动相干函数，采用有限元方法分析了一些典型场地的地表地震动相干函数，两的对比结果表明：复杂场地对地震动相干函数的影响强烈。     

对波达波夫和Pride震电波方程组的对比分析

用Biot介质参数说明了波达波夫震电波方程组中弹性动力学 参数的含义，解释了第一类和第二类震电效应的意义，在忽略第一类震电效应条件下将该方 程组与Pride方程组进行比较，说明了二者在描述第二类震电效应方面的异同点. 同时指出 ：波达波夫方程组忽略了流体与固体的耦合质量；方程中的黏性耗散项丢掉了一个孔隙度因 子，依据该方程组计算出的弹性波和转换电场的幅度将偏大；边界条件之一存在错误，会影 响对波在界面上的反射透射规律的描述.     

ω循环型边界条件

通过利用预条件共轭梯度法对对称正定Toeplitz 矩阵系统进行分析，重点介绍了一种新的嵌入式预条件矩阵构造方法，证明了以前的预条件矩阵构造方法大都是这种方法的特例.提出了ω循环型边界条件，并将其与普通循环型及螺旋型边界条件作了分析、比较后得到了一种新的边界条件即混合型边界条件.     

顾及地块时空特点的地籍数据组织及查询

通过分析地块变更的时空变化过程，总结出具有父子关系的时态地块的空间相交性和时间相接性特点，归纳出查询这种关系的约束条件。利用扩展时空复合模型和元组时区标记，借助于变更地块的约束条件，设计出查询变更地块的时态链算法。     

丽江地震序列的震源机制,发震应力场和破裂特征

丽江７．０级地震震区位于我国西南地区现代构造应力场空间分布的复杂地区，区域应力场主压应力优势方位为南南东。震区位于可能受到多种构造动力源作用的特定构造运动环境中。获得了主震和２２个ＭＬ≥４．０级余震的震源机制Ｐ波初动解，分析表明，主震发震应力场为北３°东，与震区区域应力场主压应力优势方位有一个小角度的偏差。主震的发震应力不仅有水平应力的作用，同时还有显的垂直应力的作用。在余震序列发展中震区呈现出     

四川地区强震发生条件的综合分析

根据发震断层的时代，发震构造的应力和几何结构条件，对四川地区的强震发生条件进行了综合分析，结果表明，四川地区孕育和发生强震的断层主要晚更新世以来，特别是全新世以来活动的断裂；强震多发生在主压力方向与断层交角成３０°～６０°之间的最危险滑动角值范围，走滑断层的斜列状结构，断裂的交叉结构，断裂的枢纽结构，断裂上的弯曲，转折部位以及断裂带上的横向隆起，拗陷及其交接部位都是发震构造的结构特征，有利于强震的