人工神经网络在岩体初始应力场反演中的应用

岩土工程问题的有限元分析一般需要考虑初始地应力场，而可供工程应用的初始应力值，主要靠少数实测资料。根据少数测点值，采用人工神经网络与有限元相结合的方法求解岩体初始应力场。通过算例说明：文中所提方法是合理的。     

岩质边坡稳定性分析的探讨

通过最大剪应力等值线来确定边坡的滑动面,并与其结构面抗剪强度相比较,给出了确定边坡的稳定系数的方法。     

A multiscale finite element formulation for axisymmetric elastoplasticity with volumetric locking

Similar to plane strain, axisymmetric stress problem is also highly kinematics constrained. Standard displacement‐based finite element exhibits volumetric locking issue in simulating nearly/fully incompressible material or isochoric plasticity under axisymmetric loading conditions, which severely underestimates the deformation and overestimates the bearing capacity for structural/geotechnical engineering problems. The aim of this paper is to apply variational multiscale method to produce a stabilized mixed displacement–pressure formulation, which can effectively alleviate the volumetric locking issue for axisymmetric stress problem. Both nearly incompressible elasticity and isochoric J₂ elastoplasticity are investigated. First‐order 3‐node triangular and 4‐node quadrilateral elements are tested for locking issues. Several representative simulations are provided to demonstrate the performance of the linear elements, which include the convergence study and comparison with closed‐form solutions. A comparative study with pressure Laplacian stabilized formulation is also presented. Copyright © 2009 John Wiley & Sons, Ltd.     

Hydraulic parameters in channels with wall vegetation and gravel bed

In this experimental study,field observations and laboratory experiments have been carried out to assess the impacts of the vegetated channel walls and aspect ratio on flow velocity profiles,shear stress distribution and roughness coefficient of channel.Results show that the presence of vegetation cover on channel wall causes deviation of the Reynolds stress distribution from the linear one under uniform flow condition.It is also noticed that the Reynolds stress distribution is influenced by the aspect rati...     

水压致裂煤层裂缝发育特点的研究

本文对煤岩基本力学性质、煤层水压致裂缝形成条件、裂缝形态以及裂缝开裂角方位等基本理论进行了研究与探讨，通过大量煤岩力学性质测试，证实了试验区目的层煤岩弹性模量低，泊松比较高，脆性大，易破碎，易压缩。文章还得出了目的层煤岩Ｍｏｈｒ断裂准则二次抛物线型包络线，煤层水压致裂裂缝形式判断，裂缝开裂角方位的计算公式以及有关结论。     

水平层状岩体边坡动力响应中的结构面效应研究

根据应力波传播原理分析了水平层状岩体边坡中应力波传播特征,建立了应力波在该类边坡中传播的模型.利用离散元软件UDEC分析了不同频率垂向压缩应力波作用下边坡动力响应规律中的结构面效应.结果表明:边坡中的水平层面对坡顶的动力响应有明显影响.低频应力波作用下,水平层状岩体边坡坡顶的垂向峰值速度较均质坡体相同部位的峰值速度的增...     

河谷地形对深覆盖层中防渗墙应力变形影响分析

为研究河谷地形对深厚覆盖层中防渗墙应力、变形的影响,以某沥青混凝土心墙堆石坝为工程背景,模拟了狭窄河谷和宽深河谷并分别建立有限元模型,坝体材料及覆盖层采用邓肯-张E-B模型,防渗墙与覆盖层、基岩之间的接触关系采用无厚度接触面模拟,进行三维非线性有限元计算,对比分析两种河谷情况下防渗墙的应力、变形情况。计算结果表明：狭窄河谷中,防渗墙沉降和水平向位移及防渗墙与覆盖层的不均匀变形均比宽深河谷小,其中不均匀变形最大减小了24.8%;宽深河谷中,防渗墙受河谷地形约束作用较弱,竖直向压应力较狭窄河谷更大,最大增加了40.3%;防渗墙的竖直向压应力最大值位置受中性点位置和河谷地形的共同影响,其中竖直向压应力最大值约30%来自墙顶坝体土压力,70%来自与覆盖层之间的负摩擦力。其研究结果可为不同地形条件下坝基防渗墙的设计提供参考。     

1970年通海7.7级大地震强余震触发

1970年1月5日云南通海发生了M_S7.7地震, 震后发生了多次M_S＞5.0的强余震。 文中计算了1970年通海7.7级大地震后, 主震分别在5次强余震破裂面上诱发的库仑破裂应力变化(ΔCFS)。 结果表明, 有4次强余震发生在库仑破裂应力增加(ΔCFS＞0)的地区, 增加的范围为10^-2～10^-1 MPa; 有1次强余震按2种震源机制解结果给出的破裂面计算, 得到2种结果, 分别发生在库仑破裂应力变化为正和在库仑破裂应力变化为负的地区。 研究结果表明, 主震位错产生的库仑破裂应力变化可能是1970年通海7.7级大地震强余震活动的重要原因。     

MS8.0汶川地震对MS7.0芦山地震成核失稳的影响

依据速率-状态依赖性摩擦本构关系,并结合中下地壳和上地幔的黏弹性松弛效应,以震后库仑破裂应力变化和同震动态库仑破裂应力变化的计算为基础,模拟了两种应力变化对芦山地震断层的失稳发震时间的影响,研究了2008年M_S8.0汶川地震与2013年M_S7.0芦山地震之间的触发关系.计算得到,汶川地震在芦山地震震源断层面上产生的动态应力变化的峰值为0.127 MPa;此外,经过近5年中下地壳和上地幔的黏弹性松弛效应,芦山地震震源断层面上受到的震后应力变化值为0.025 MPa.结果表明,芦山地震的震源断层在应力积累逐渐接近临界状态的某一特定时期内,受到了汶川地震产生的动态应力变化、静态应力变化以及黏弹性松弛效应造成应力变化的共同触发作用,且动态应力的延迟触发作用可能更为显著.最后对芦山地震之后研究区域的应力变化场进行了初步探讨.     

Peak discharge increase in hyperconcentrated floods

The peak of river floods usually decreases in the downstream direction unless it is compensated by freshwater inflow from tributaries. In the Yellow River (China) the opposite is regularly observed, where the peak discharge of river floods increases in the downstream direction (at a rate far exceeding the contribution from tributaries). This flood peak discharge increase is probably related to rapid morphological changes, to a modified bed friction, or to a combination of both. Yet the relative role of these processes is still poorly understood. This paper aims to analyze the relative contribution of bed erosion and friction change to the peak discharge increase, based on available data and a recently developed numerical model. Using this high-resolution, fully coupled morphodynamic model of non-capacity sediment transport, two hyperconcentrated floods characterized by downstream peak discharge increase are numerically reproduced and analyzed in detail. The results reveal that although erosion effects may contribute to the downstream discharge increase (especially in case of extreme erosion), for most cases the increase must be mainly due to a reduction in bed friction during peak discharge conditions. Additionally, based on the concept of channel storage reduction, the effects of decreasing bed friction and (very strong) bed erosion can be integrated in explaining the peak discharge increase.