灌注桩后注浆单桩竖向极限承载力研究

近年来,后注浆技术得到了广泛的应用。钻孔灌注桩可大大降低建筑物的沉降,并使建筑物的沉降更加均匀,文章介绍后注浆工艺的承载力提高机理及在天津地区的几个工程实例,分析了注浆前后单桩竖向极限承载力对比情况及影响单桩竖向极限承载力的几个因素。     

PARAMETER AND VARIANCE ESTIMATION IN GEOTECHNICAL BACKANALYSIS USING PRIOR INFORMATION

A probabilistic framework to perform inverse analysis of geotechnical problems is presented. The formulation allows the incorporation of existing prior information on the parameters in a consistent way. The method is based on the maximum likelihood approach that allows a straightforward introduction of the error structure of field measurements and prior information. The difficulty of ascribing definite values to the uncertainties associated with the various types of observations is overcome by including the corresponding variances in the set of parameters to be identified. The inverse analysis results in a minimization problem that is solved by coupling the optimization technique to the finite element method. Two examples are presented to illustrate the performance of the method. The first one corresponds to a synthetic case simulating the excavation of a tunnel. Young's modulus, K₀ value and measurements variances are identified. The second case concerns the excavation of a large underground cavern in which again Young's modulus and K₀ are identified. It is shown that introduction of prior information permits the estimation of parameters more consistent with all available informations that include not only monitored displacements but also results from in situ tests carried out during the site investigation stage.     

基岩水与平原水转换关系的地球物理勘查技术探讨

基岩水与平原水转化关系的研究是搞清地表水与地下水转化途径、方式及流量进而进行水资源评价的一个重要内容.本文以河西走廊地区为例,分析了地球物理勘查技术对解决上述问题的可能性,同时结合该地区地质地貌特点,选用了EH-4电导率成像系统、自然电位法技术组合进行了实例勘查,取得了较好的效果,为前人的假说提供了科学依据,也为该内容的研究提供有效的手段.     

测井技术在灰岩地区隧道深孔勘探中的应用

鄂西地区完整灰岩地层的视电阻率、密度、声波、自然伽马等曲线形态受灰岩胶结物质成份和泥质含量影响并具有一定的规律性，当灰岩地层受到构造、溶蚀作用产生破碎带、岩溶、裂隙等不良地质体或存在地下含水体时，各测井物理参数发生变化并在曲线形态上呈现异常反映，据此可以对不良地质体的位置、规模、类型进行准确判断。测井技术在鄂西地区灰岩地区隧道深孔勘探中的应用，补充、验证了钻探资料，为隧道设计、施工提供了可靠的依据。     

井下巷道围岩变形的散斑分析法

通过对散斑计量法原理分析、数学描述及观测实例的论述,证明激光散斑法是研究煤矿地下结构物相似模型变形状态的一种新的无损检测技术,若采用白光作为光源,该项技术可用于二维变形场的实地测试。     

海域勘界技术的应用

制订划界方案是海域勘界工作的核心工作,包括资料分析、初拟划界草案、草案协调和协商等阶段．大多数海域界线需要分段划分．勘界实践表明,不同界线及其不同区段的界线必须运用不同的划界技术,如垂直岸线法、水道（航道）中心线法、协议线法、习惯线法、中点连线法、用海界线法及岛礁中间线法等．草案协调是勘界工作的难点,必须采取背靠背协调、面对面协商及反复沟通等方法,促成双方达成共识．     

Simulation of nonlinear wave run-up with a high-order Boussinesq model

This paper considers the numerical simulation of nonlinear wave run-up within a highly accurate Boussinesq-type model. Moving wet–dry boundary algorithms based on so-called extrapolating boundary techniques are utilized, and a new variant of this approach is proposed in two horizontal dimensions. As validation, computed results involving the nonlinear run-up of periodic as well as transient waves on a sloping beach are considered in a single horizontal dimension, demonstrating excellent agreement with analytical solutions for both the free surface and horizontal velocity. In two horizontal dimensions cases involving long wave resonance in a parabolic basin, solitary wave evolution in a triangular channel, and solitary wave run-up on a circular conical island are considered. In each case the computed results compare well against available analytical solutions or experimental measurements. The ability to accurately simulate a moving wet–dry boundary is of considerable practical importance within coastal engineering, and the extension described in this work significantly improves the nearshore versatility of the present high-order Boussinesq approach.     

Analytic Solution of Interaction Between Surface Waves and Floating Elastic Plates with Elastic End-Restraints

Based on the dynamic theories of water waves and Mindlin plates,the analytic solution of interaction between surface waves and two-dimensional floating elastic plates with edge-restraint is constructed by use of the Wiener-Hopf technique.Firstly,without regard for elastic edge restraint,the wave-induced responses of elastic floating plate analyzed by the present method are in good agreement with the results from literature and experimental results.Therefore,it can be shown that the present method is valid.Secondly,three end-restraint cases(i.e.,the left-end elastic restraints,the both-end elastic restraints,and the right-end elastic restraints)are proposed to reduce the vibration of floating plates,in which the spring is used to connect the sea bottom and the floating plate's left(or right)edge.The relations between the spring stiffness and the parameters of wave-induced responses of floating plates are discussed.Moreover,the effective method to reduce the vibration of floating elastic plates can be obtained through comparison.     

Application of Line Boundary Technique to 2D Tidal Current Simulation

To deal with the problems concerning the shore boundary,moving boundary and engineeringboundary which are encountered frequently in 2D tidal current simulation by the finite difference method,theconcept of line boundary is introduced and studied here,and then the line boundary technique in common useis proposed in this paper.Analysis of some calculation cases shows that this technique is practical,effective,and simple in 2D tidal current simulation involving different boundaries.     

重力活塞取样器取样技术研究

现代海洋沉积物柱状取样技术是一套综合性的高新技术系统,它一般应该包括：优良的取样器具,方便灵活的取样操作设备,高精度的定位导航仪器和高分辨率的地形、地貌、地层探测系统等四个方面。我国和先进国家相比,取样操作设备方面差距最大,应该成为我国今后取样技术研究和发展的重点