我国海水制盐工艺改革的设计研究

从技术上和工艺上的可能性、可行性和合理性，论证了海水制盐工艺改革的必要性，并且提出了实现海水制盐工艺改革的各种设计方案。它对我国的海水制盐工业的发展将具有深远意义。     

磷酸盐现场自动分析仪化学工艺优化研究

本文结合营养盐现场自动分析仪的研制,研究了磷酸盐分析所南各种试剂的用量及其作用,重点研究了低浓度磷酸盐的浓度与吸光值之间的关系以及温度对完全反应时间的影响,给出了０．００６～０．１２０ｍｇ／Ｌ范围内ＰＯ４－Ｐ浓度与吸光值的线性函数关系和较合适的完全反应温度,并且提出了现场自动分析仪的两点定标方法。     

mKdV-sine-Gordon方程丰富的相互作用解

基于mKdV-sine-Gordon方程的Wronsk解的形式和结构,提出了Wronsk形式展开法,通过这一方法求得了该方程的丰富的相互作用解,该方法的主要特征是不要求Wronsk行列式元素满足线性偏微分方程组。     

Application of Line Boundary Technique to 2D Tidal Current Simulation

To deal with the problems concerning the shore boundary,moving boundary and engineeringboundary which are encountered frequently in 2D tidal current simulation by the finite difference method,theconcept of line boundary is introduced and studied here,and then the line boundary technique in common useis proposed in this paper.Analysis of some calculation cases shows that this technique is practical,effective,and simple in 2D tidal current simulation involving different boundaries.     

应用荧光抗体技术检测牙鲆体内的河流弧菌

用灭活的河流弧菌(Vibrio fluvialis)抗原,注射免疫实验兔,制得凝集价为1∶5 120的抗血清。用试管凝集法检测了抗血清的特异性,再用免疫吸附法去除交叉反应,从而得到高效价、高特异性的抗河流弧菌血清。用所制备的抗血清在实验室中建立起河流弧菌荧光抗体检测技术(FAT),在荧光显微镜下可清楚地看到被标记的病原菌,整个检测过程只需3h。用河流弧菌感染牙鲆(Paralichthys olivaceus),24 h后,用FAT测定牙鲆的血液、肾脏和肝脏中的河流弧菌,在血液中河流弧菌的检出率最高,其次是肾脏,肝脏的检出率最低。以上结果表明:荧光抗体技术可以快速、灵敏、准确地检测出牙鲆体内的河流弧菌。     

Wave Interactions with Multiple Semi-Immersed Jarlan-Type Perforated Breakwaters

This study examines wave interactions with multiple semi-immersed Jarlan-type perforated breakwaters. A numerical model based on linear wave theory and an eigenfunction expansion method has been developed to study the hydrodynamic characteristics of breakwaters. The numerical results show a good agreement with previous analytical results and experimental data for limiting cases of double partially immersed impermeable walls and double and triple Jarlan-type breakwaters. The wave transmission coefficient C_T; reflection coefficient C_R, and energy dissipation coefficient C_E coefficients and the horizontal wave force exerted on the front and rear walls are examined. The results show that C_R reaches the maximum value when B/L = 0.46n while it is smallest when B/L=0.46n+0.24 (n=0, 1, 2,...). An economical triple semi-immersed Jarlan-type perforated breakwater can be designed with B/L = 0.25 and C_R and C_T ranging from 0.25 to 0.32 by choosing a relative draft d/h of 0.35 and a permeability parameter of the perforated front walls being 0.5 for an incident wave number kh nearly equal to 2.0. The triple semi-immersed Jarlan-type perforated breakwaters with significantly reduced C_R, will enhance the structure’s wave absorption ability, and lead to smaller wave forces compared with the double one. The proposed model may be used to predict the response of a structure in the preliminary design stage for practical engineering.     

直驱式波浪能转换系统的研究和性能优化

A direct-drive wave energy conversion system based on a three-phase permanent magnet tubular linear generator （PMTLG） and a heaving buoy is proposed to convert wave energy into electrical energy. Sufficient experimental methods are adopted to compare the computer simulations, the validity of which is verified by the experiment results from a wave tank laboratory. In the experiment, the motion curves of heaving buoy are with small fluctuations, mainly caused by the PMTLG＇s detent force. For the reduction of these small fluctuations and a maximum operational efficiency of the direct-drive wave energy conversion system, the PMTLG＇s detent force minimization technique and the heaving buoy optimization will be discussed. It is discovered that the operational efficiency of the direct-drive wave energy conversion system increases dramatically after optimization. The experiment and optimization results will provide useful reference for the future research on ocean wave energy conversion system.     

高真空击密法在软地基处理中的应用

姑合工程实践,介绍快速“高真空击密法”软地基处理方法的施工原理、施工工艺及质量控制等,并简单阐述“高真空击密法”在进行软地基处理中的优点。     

三传感器波浪水槽二次反射主动吸收方法

三传感器波浪水槽二次反射主动吸收方法是加拿大科学院水力中心最近开发的一种水槽反射波控制技术。该法在造波板前 1～ 2倍波长处布置 3个传感器 ,通过入反射波分离方法得到准确的入反射波参数 ,以此调整造波信号 ,有效地吸收由建筑物反射回到造波板的二次反射波。文中在分析波浪水槽二次反射吸收方法研究现状的基础上 ,介绍了加拿大水力中心对现有方法的改进及其效果     

单只桶基安全负压沉贯操作方法物模试验初探

提出了由物质试验方法初步选择的一种可操作的单只桶基安全负压沉贯操作程序,它可作为试验室内多桶基导管架物模试验以及海上（近）原型尺度桶基试验实施负压沉贯操作方法的试验依据,通过对这些试验及其操作程序的修正和完善,可为实际桶基实施海上沉贯作业出一种可靠,安全的操作程序或方法。