用旅游图制作导航电子地图中的地图纠正

介绍了一种用三次插值样条对公开出版的旅游图进行纠正,制作汽车导航电子地图的方法,分析了其中存在的问题,提出了解决的办法。     

高光谱遥感数据三次光滑样条滤噪

分析了高光谱遥感数据噪声滤波的作用和现状，实现了一种基于三次光滑样条函数的高光谱遥感数据噪声滤波算法，解决了目前高光谱遥感数据噪声滤波算法自适应效果不理想的问题。通过对AVIRIS数据试验，证明此方法简单易行，计算精度高，具有良好的局部自适应拟合能力，并能有效地滤除数据中的噪声，改善数据质量。     

东准噶尔纸房地区晚石炭世巴塔玛依内山组陆相火山-沉积体系特征

东准噶尔巴塔玛依内山组是典型陆相火山．沉积体系(盆地)，主体由基性及中酸性火山熔岩组成，火山碎屑岩及火山碎屑沉积岩较少，通过对纸房地区晚石炭世巴塔玛依内山组陆相火山岩的岩石化学、地球化学特征进行系统研究，认为它属于造山期后固结初期，新陆壳裂谷向高原火山岩演化的同岩浆源、同沉积盆地、同火山作用的钙碱系列双峰式火山岩．     

塔里木盆地阿克库勒地区石炭系卡拉沙依组成岩作用

阿克库勒地区卡拉沙依组碎屑岩储层的成分成熟度和结构成熟度均较低．储层的次生溶蚀孔隙所占比例远高了：原生孔隙，次生孔隙是储层的主要储集空间．样品数据统计显示，卡拉沙依组储层属于低孔、低渗储层类型．根据岩石薄片、铸体薄片观察及储层样品的扫描电镜和阴极发光分析结果，本区石炭系储层主要经历的成岩作用有压实（压溶）作用、胶结作用、溶蚀作用和交代作用，其中碳酸盐矿物的沉淀和溶蚀作用是本区卡拉沙依组储层所经历的最重要的成岩作用．成岩作用已达到晚成岩B期，早期方解石交代石英颗粒并发生大量溶蚀，生成大量次生孔隙，晚期方解石没有发生溶蚀．     

磁铁石英岩型铁矿岩芯光谱编录研究

 对河北省昌黎县闫庄铁矿床的磁铁石英岩型铁矿石261件样品进行了光谱反射率测量，并与其铁含量进行了相关关系研究，目 的是对钻孔岩芯编录的新方法即高光谱岩芯编录在此类矿床中的可行性进行分析。研究结果表明，铁矿石反射率较低，一般为5%~20% ，铁离子的吸收峰主要表现在400~1 100 nm范围内，铁矿石中铁含量与850~900 nm的反射率均值呈现显著指数负相关关系，为高光谱 岩芯编录在此类矿床中的可行性提供了理论依据和技术途径。     

新疆东昆仑木孜塔格蛇绿混杂岩中发现富Nb玄武岩

富Nb 玄武岩以相对高的TiO2 含量、低的LILE/HFSE和LREE/HFSE比值以及(La/Nb)MN＜2为特征,是岛弧环境的典型产物。首次报道发现于新疆东昆仑木孜塔格蛇绿混杂岩中的富Nb玄武岩,并分析了它们的典型地球化学特征和构造环境,表明了它们形成在岛弧环境。     

某既有建筑物改造工程地基加固质量的综合检测

随着既有建筑物的增层改造工程的发展和技术的日益成熟 ,为了提高原有建筑物地基土强度和变形能力 ,对其基础加固处理也愈加频繁。如何准确有效地评价其地基加固质量及其空间变化的均匀性是关系此类工程安全可靠的重要保证。本文以某一工程为例 ,讨论既有建筑物增层改造工程的地基加固质量的检测和综合评价方法。该建筑物建于 5 0年代 ,原设计为 5层 ,现增层为 6层 ,采用高压注浆方法进行地基加固处理.     

基于MAPGIS的1∶50万土地利用数据库系统设计与实现

土地利用资料是国家重要的基础地理资料 .针对全国土地利用数据进行建库管理会对国家建设起到重要的作用 .以MAPGIS为基础 ,按照一定的设计原则提出系统总体上应有的数据编辑、查询、统计等六大模块及其主要的功能 .详细说明了在MAPGIS平台的支持下全国土地利用数据库的数据组织方式 ,以及外部属性与图形数据的关联方式、图库中图元的B+ 树索引的结构、数据检索、输出流程等关键技术问题的解决方案 .     

Modelling of meteorological conditions at an urban scale for the PUMA winter campaign

For the winter 2000 campaign of the Pollution of Urban Midlands Atmosphere project, observation and numerical modelling of meteorological conditions over the West Midlands conurbation, UK, was undertaken. Modelling was performed using the regional atmospheric meteorological system (RAMS). This paper presents a comparison of modelled and observed wind and temperature for 25 and 26 January 2000. The RAMS model uses two nested grids with a mesh size of 2 km for the inner grid which is embedded in the outer grid with a mesh size of 8 km. Statistical evaluation of the model results against the observational data of wind speed, direction and temperature at 10 m was conducted. In general, the modelling results are in a reasonable agreement with observation. The statistical evaluation suggests that model performance is poorer for the inner grid than the outer grid as the model uncertainties (mainly mean bias) transfer from the outer to inner one. The low indices of agreement of temperature and wind are mainly associated with the systematic root-mean-square-difference values. For temperature, the systematic bias may also be affected by representation of cloud amount by the model. For wind, the model tends to have a poor performance for calm conditions, as under a stable anti-cyclonic situation local wind patterns associated with topography may develop, although the topography of the region is relatively flat. The results for the inner grid reveal some subtle spatial patterns at a scale smaller than 10 km near hills and valleys with differences in elevation of a few hundred metres.     

Development and testing of numerical methods for two-way nested air pollution modelling

A new 3-D model REGINA (REGIonal high resolutioN Air pollution model) is under development at the National Environmental Research Institute (NERI). The model is based on pieces from several models developed over the last decades at NERI. The aim of the work is to develop a nested model which can operate with very high resolution in both space and time. To fulfill this aim the choice and implementation of accurate numerical methods is crucial. The model will be applied for studying air pollution phenomena (both monitoring, forecasting and scenarios) over Denmark. The present paper is focussed on the modification, implementation and testing of a numerical method for treating the horizontal advection in the model as well as the implementation of two-way nesting techniques. The horizontal transport in the model is solved using an accurate space derivative algorithm. This method is traditionally implemented with periodic boundary conditions, however, this is not an option for nested modelling. A new method for calculating non-periodic boundary conditions has been developed in order to overcome this problem. Extensive testing of the numerical solution of the advection and the coupling of the solution of advection and chemistry in the model using Molenkamp–Crowley rotation tests have been carried out. The results show that the model with the current implementation of numerical methods is suitable for calculating air pollution levels with high resolution.