油气差异泵吸作用机理探讨——以泌阳凹陷为例

通过对泌阳凹陷油气成藏过程的系统研究,发现在差异抬升过程中,深凹源岩区抬升幅度小,凹陷四周圈闭发育区抬升幅度大,差异抬升运动导致源岩和圈闭之间的势能差急剧增大,从而促使油气大规模沿砂体向圈闭充注,这一过程类似于水泵抽水的过程,据此,文中提出了油气泵吸作用和油气差异泵吸作用的概念及机理,并以泌阳凹陷为例讨论了油气差异泵吸作用的形成条件、主要影响因素及油气差异泵吸作用对油气差异分布的控制作用。研究表明:影响油气差异泵吸作用的因素主要有势能梯度、通道质量和泵源配置及油气运移距离;泌阳凹陷油气分布总体上受成藏运聚系统的控制,在各运聚系统内油气分布受油气差异泵吸作用的控制,其中势能梯度、泵源配置及油气运移距离是影响油气差异分布的主要因素,而在每一个大泵(复合泵)内部,通道质量差异是影响油气差异分布的主要因素。     

柯坪塔格推覆构造几何学、运动学及其构造演化

大量野外构造地质调查和深部构造解释表明柯坪塔格推覆构造由多组倒转复式背斜、复式箱状背斜构成的推覆体及其前缘逆冲断裂组成 ,由寒武系—第四系组成的推覆体由北向南逆—斜冲 ,平面上构成向南凸出的弧形推覆构造 ;普昌断裂由各不相连的逆冲斜冲断裂段组成 ,而不是完整的一条走滑断层 ,各推覆体前缘逆冲断裂与各推覆体的普昌断裂段共同构成统一的前缘逆冲斜冲逆冲断裂和推覆构造系统 ;普昌断裂段以西的推覆体具有向东抬升、向西倾覆的鼻状构造特征 ,普昌断裂段以东的推覆体具有向西抬升、向东倾覆的鼻状构造特征 ,普昌基底隆起带是巴楚隆起隐伏在柯坪塔格推覆构造之下的部分。各推覆体前缘断裂在深部均归并于统一的寒武系底部的滑脱面 ,其南浅北深 ,东浅西深 (普昌隆起带以西 )或西浅东深 (普昌隆起带以东 ) (6 10km ) ,埋深较大区发育多组滑脱面。柯坪塔格推覆构造的形成时期为晚第四纪 ,为现今活动的推覆构造系统。文中认为各推覆体向南西的倾覆端基底滑脱面和中新生界内部的滑脱面没有贯通 ,是未来 6级以上地震的发震构造部位。     

天然气水合物体系动态演化研究（I）：地质历史演变

1995年Dickens对55．5Ma前古新世末增温事件进行了研究，提出天然气水合物作为全球环境变化重要因子的假说．认为古新世末增温事件溶解无机碳-2～-3‰的^13δC位移可以用水合物所含甲烷的释放与随后氧化成二氧化碳来解释．此后，地质历史演变中的天然气水合物演化研究蓬勃发展，本文总结古新世末增温事件、新元古代末期雪球事件、第四纪千年尺度事件等最新进展，为天然气水合物动态演化研究提供基础．开展天然气水合物-天然气体系动态演化过程数值模拟与特征分析，可望促进天然气水合物在全球变化与碳循环中作用的深入认识．     

Introduction of structural aseismic research in China in recent four years

Introduction Greeting the coming of the 21st century, Professor HU Yu-xian and other Chinese scholars briefed the trend of earthquake engineering in China and aboard (HU, 1999; HU, ZHOU, 1999). The experiences and lessons learning from the destructive earthquakes in China and abroad in re-cent years, the damage action of the large velocity impulse in ground motion in near field in seis-mic design, numerous earthquake examples show that there are many weaknesses in aspects of earthquake p…     

德令哈地震台震级偏差及台站校正值的研究

利用德令哈地震台DD—l记录到的746个近震，对其测定的震级偏差进行统计计算，发现DD—l测定的震级偏小。经过分析，指出了产生偏差的原因，并给出了校正值C= 0．15。     

Design of efficient base isolation for hammers and presses

Foundations supporting hammers and presses have to withstand powerful short-period impact loads. When designing these foundations, their vibration amplitudes and the forces transmitted to the supporting piles or soil medium must be reduced to meet serviceability and stability requirements. Mounting systems are often used to achieve this goal. The objectives of this paper are to investigate the efficiency of mounting systems for different foundation configurations and to provide practical guidance for their design. A comprehensive parametric study was conducted and the results were used to establish a set of charts for the design of efficient mounting systems.     

Characteristics of Tectonic Deformation and Mechanisms for the Active Maxianshan-Xinglongshan Fault System in the Lanzhou Area

A detailed investigation permitted us to obtain quantitative data concerning fine geometric structures of 4 faults of the active Maxianshan-Xinglongshan fault system and the latest movement along them. Of them the northern Maxianshan border fault is a large-scale, strongly active Holocene reverse sinistral strike-slip fault, the other 3 faults, the southern Maxianshan border fault and the southern Xinglongshan border and the northern Xinglongshan border faults are the accompanying active late-Pleistocene thrust faults, which are incorporated into the main strike-slip fault, the northern Maxianshan border fault at depth. It is the most important earthquake-controlling fault in the Lanzhou area, the fault influences and constrains the seismic activity in the area.     

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.     

Identification of soil degradation during earthquake excitations by Bayesian inference

A Bayesian inference approach is introduced to identify soil degradation behaviours at four downhole array sites. The approach of inference is based on a parametric time‐varying infinite impulse response filter model. The approach is shown to be adaptive to the changes of filter parameters and noise amplitudes. Four sites, including the Lotung (Taiwan), Chiba (Japan), Garner Valley (California), and Treasure Island (California) sites with downhole seismic arrays are analysed. Our results show two major types of soil degradation behaviour: the well‐known strain‐dependent softening, and reduction in stiffness that is not instantaneously recoverable. It is also found that both types of soil degradation are more pronounced in sandy soils than in clayey soils. The mechanism for the second type of soil degradation is not yet clear to the authors and suggested to be further studied. Copyright © 2003 John Wiley & Sons, Ltd.     

System identification of instrumented bridge systems

Several recorded motions for seven bridge systems in California during recent earthquakes were analysed using parametric and non‐parametric system identification (SI) methods. The bridges were selected considering the availability of an adequate array of accelerometers and accounting for different structural systems, materials, geometry and soil types. The results of the application of SI methods included identification of modal frequencies and damping ratios. Excellent fits of the recorded motion in the time domain were obtained using parametric methods. The multi‐input/single‐output SI method was a suitable approach considering the instrumentation layout for these bridges. Use of the constructed linear filters for prediction purposes was also demonstrated for three bridge systems. Reasonable prediction results were obtained considering the various limitations of the procedure. Finally, the study was concluded by identifying the change of the modal frequencies and damping of a particular bridge system in time using recursive filters. Copyright © 2003 John Wiley & Sons, Ltd.