2-D crustal structure of Changbaishan-Tianchi volcanic region determined by seismic traveltime inversion

IntroductionTrial-and-error forward modeling of wide-angle seismic reflection/refraction traveltimes for 2-D velocity structure is extremely time-consuming, even for experienced data interpreters. For wide-angle seismic reflection/refraction experiments that consist of numerous shots along a single line, it is quite difficult through repeated trial-and-error forward modeling to construct a 2-D model that fits the data within acceptable limits (Cerveny, et al, 1977; ZHANG, et al, 200 . In ad…     

Estimation of azimuth and slowness of tele-seismic signals recorded by a local seismic network

Introduction The azimuth and slowness are two major features of seismic signals. The accurate estimation of them is quite important for both phase identification and event location. Generally, there are two types of seismic stations, i.e. 3-component stations (3C) and arrays. To estimate the two direc-tional parameters, the polarization analysis (Jurkevics, 1988) is commonly used for 3C stations and the frequency-wavenumber spectrum analysis ( f-k) (Capon, 1969; Kvaerna, Doornbos, 1986) is …     

Genesis of chlorine and sulphur in fumarolic emissions at Vulcano Island (Italy): assessment of pH and redox conditions in the hydrothermal system

Chlorine- and sulphur-bearing compounds in fumarole discharges of the La Fossa crater at Vulcano Island (Italy) can be modelled by a mixing process between magmatic gases and vapour from a boiling hydrothermal system. This allows estimating the compounds in both endmembers. Magma degassing cannot explain the time variation of sulphur and HCl concentrations in the deep endmember, which are more probably linked to reactions of solid phases at depth, before mixing with the hydrothermal vapours. Based on the P–T conditions and speciation of the boiling hydrothermal system below La Fossa, the HCl and S_tot contents in the hydrothermal vapours were used to compute the redox conditions and pH of the aqueous solution. The results suggest that the haematite–magnetite buffer controls the hydrothermal fO₂ values, while the pH has increased since the end of the 1970s. The main processes affecting pH values may be linked to Na–Ca exchanges between evolved seawater, feeding the boiling hydrothermal system, and local rocks. While Na is removed from water, calcium enters the solution, undergoes hydrolysis and produces HCl, lowering the pH of the water. The increasing water–rock ratio within the hydrothermal system lowers the Ca availability, so the aqueous solution becomes less acidic. Seawater flowing towards the boiling hydrothermal brine dissolves a large quantity of pyrite along its path. In the boiling hydrothermal system, dissolved sulphur precipitates as pyrite and anhydrite, and becomes partitioned in vapour phase as H₂S and SO₂. These results are in agreement with the paragenesis of hydrothermal alteration minerals recovered in drilled wells at Vulcano and are also in agreement with the isotopic composition of sulphur emitted by the crater fumaroles.     

由地方台网记录确定远震信号的方位角和慢度

介绍一种新的适合于地方遥测台网数据处理的方法，估算远震信号到达台站的方位角和慢度．该方法是根据信号在各台站上的到时与台站位置矢量在信号传播方向上的投影之间的相关性的原理．实际分析结果表明，应用该方法对地方台网的记录进行处理时可以准确地计算出信号的方位角和慢度，并能准确快捷地对地方台网记录的远震信号进行解释．      

数字地震仪的发展历史及展望

地震仪经历了光点，模拟和数字的变化，数字地震仪本身由16位发展到24位，其附属设备（电缆，检波器）也是到了不同程度的发展。近年来，I／O等公司利用MEMS技术研制了新型地震检波器，这一新的发展对于地震采集尤其是多分量采集带来重要影响。     

Hybrid vibration experiments with a bridge foundation system model

In order to improve seismic design technology of bridges, it is necessary to evaluate the vibration characteristics of a bridge–soil system that consists of soil, foundation structure, pier and superstructure. However, there have been few experimental studies on seismic behavior of bridge–soil system. In this paper, we conducted the hybrid vibration experiment on seismic behavior of bridge–soil system, and examined the applicability of hybrid vibration experiment to study seismic response of bridge–soil system. Based on the experiment results, seismic response of bridge was quantitatively studied.     

Seismic analysis of base-isolated liquid storage tanks using the BE–FE–BE coupling technique

A three-dimensional soil–structure–liquid interaction problem is numerically simulated in order to analyze the dynamic behavior of a base-isolated liquid storage tank subjected to seismic ground motion. A dynamic analysis of a liquid storage tank is carried out using a hybrid formulation, which combines the finite shell elements for structures and the boundary elements for liquid and soil. The system is composed of three parts: the liquid–structure interaction part, the soil–foundation interaction part, and the base-isolation part. In the liquid–structure interaction part, the tank structure is modeled using the finite elements and the liquid is modeled using the internal boundary elements, which satisfy the free surface boundary condition. In the soil–foundation interaction part, the foundation is modeled using the finite elements and the half-space soil media are modeled using the external boundary elements, which satisfy the radiation condition in the infinite domain. Finally, above two parts are connected with the base-isolation system to solve the system's behavior. Numerical examples are presented to demonstrate the accuracy of the developed method, and an earthquake response analysis is carried out to demonstrate the applicability of the developed technique. The properties of a real LNG tank located in the west coast of Korea are used. The effects of the ground and the base-isolation system on the behavior of the tank are analyzed.     

大型维歇特地震仪的记录特征及其在地震速报中的作用

大型维歇特地震仪自德国引进南京地震台已近70年。本文简要叙述了该仪器的性能；并以南京地震台的大型维歇特地震仪的记录为例，介绍了该仪器在300-2000km范围内的记录特征，回顾了该仪器在地震速报中所起的历史作用。     

企业地震预警系统应用研究

在充分调研国外地震预警系统现状的基础上，进行了地震预警系统的研究，研制了相应的数据分析软件。采用数字化观测技术、GIS技术等高新技术，在中国石油天然气股份有限公司大连分公司建立了地震预警试验系统，并将该地震预警系统与地震应急系统相连，为今后开展类似工作积累了经验。     

DAS24-3B数据采集系统采集控制模块的工作原理

DAS24-3B是中国科学院地质与地球物理研究所研制的宽频带地震数据采集系统。采集控制模块是该系统的重要组成部分。本文阐述了控制模块的工作原理，介绍了DAS24-3B系统的基本组成和采集器工作过程，并给出该系统如何与笔记本端应用程序界面通讯和联络的操作建议，使该系统能够在工作中发挥更大的作用。