Seismic Displacement of Gravity Walls by a Two-body Model

Gravity walls retaining dry soil are modeled as a system of two bodies: (a) the gravity wall that slides along the wall-foundation soil boundary and (b) the critical soil wedge in the soil behind the wall. The strength of the system is defined by both the frictional and the cohesional components of resistance. The angle of the prism of the critical soil wedge behind the wall is obtained using the limit equilibrium method. The model accounts for changes in the geometry of the backfill soil behind the wall by considering the displacements at the end of each time step under limit equilibrium. The model shows that the standard (single) block model is over-conservative for the extreme case of critical-to-applied-seismic acceleration ratios less than about 0.30, but works well for cases where this ratio ranges between 0.5 and 0.8. The model is applied to predict the seismic displacement of gravity walls (a) tested in the shaking-table and (b) studied numerically by elaborate elasto–plastic analyses.     

太阳高度角和日出日落时刻太阳方位角一年变化范围的计算

介绍了太阳位置的确定方法，并通过计算给出了全省气象观测台站的日出、日落方向的太阳方位角变化结果以及每个台站一年中正午时刻太阳高度角变化范围。     

基于Hyperion影像的涩北气田油气信息提取

 对柴达木地区涩北气田地质地理环境下的蚀变矿物进行分析，结合卫星高光谱遥感数据Hyperion的图谱，对已知气田区与背景区光谱特征进行相关分析，确定了932.64~1 346.25 nm与2 002.06~2 385.5 nm为油气信息识别的有利波长范围； 利用光谱角制图（SAM）技术提取了涩北气田油气的空间分布信息和台吉乃尔含气构造等远景区，为高光谱遥感油气勘探提供了有效技术方法与途径。     

“醉汉林”作为滑坡和边坡变形特征标志的意义——以陕西陇县地区为例

“醉汉林”一般被当做滑坡存在的一种标志。在陕西宝鸡地区进行地质灾害详细调查的过程中,发现变形边坡也有“醉汉林”分布。对陕西陇县郭家庄变形边坡“醉汉林”的树木倾斜角与边坡的倾角进行了测量,并结合几何学分析,认为树木倾斜角反映了边坡倾角的变化,并得出边坡倾角不断变陡是该地区边坡变形的一种主要方式的结论。研究结果表明,“醉汉林”有着多样而具体的指示意义:“醉汉林”记录了边坡变形的历史,可以作为区分滑坡与变形边坡的标志,“醉汉林”可以指示滑坡及边坡的状态,还可以判断滑坡剪出口是否存在。     

改进的光谱角制图沿照度方向分类法及其应用——以ETM数据为例

选取多光谱遥感数据（ETM）对新疆北山西段中坡山笔架山一带进行了遥感蚀变信息提取方法研究。根据光谱角制图信息增强方法的优缺点,通过对光谱照度的研究,提出了结合光谱角分类方法进行沿光谱照度方向距离分类的信息提取方法。实验表明,该方法应用于ETM数据,增强了目标信息,同时剔除掉因照度所产生的大量非目标信息,为优化信息提供了一种有效的方法。在地形比较平坦的研究区取得了很好的应用效果。     

Influence of diversion angle on water and sediment flow into diversion channel

Accumulation of the sediment in the stream of the diversion channels adversely affects its operational systems. Diversion channels are often constructed perpendicular to the main river. In this study, the water flow and sediment transport in the diversion channel with different angles were investigated in an attempt to maximize water discharge and minimize sediment discharge. A physical model with movable bed was used to simulate water and sediment flow with five diversion angles (θ) between (30°–90°). Moreover, three bed width ratios (B_r) (the relation between diversion to main channel bed width) between 30% and 50% and five total discharges between (7.25 L/s to 12.25 L/s) were considered for each case of (θ). The results showed, up to 10%, increasing in proportion discharge ratios for 30 and 45 diversion angles compared with 90° diversion angle. The results also showed that the lowest diversion sediment concentration was provided by the (θ) of 30°. Across all scenarios, the average proportion concentration reduction was 64%, compared with 90° diversion angle. Closer observation of the diversion system mechanism confirmed that decreased (θ) result in decreased sediment concentrations in the diversion channels. In conclusion, the diversion channel water and sediment discharge could be effectively managed by changing the (θ) to 30° or 45° instead of 90°.     

电子经纬仪测量系统在偏置型抛物面天线检测中的应用

将电子经纬仪工业测量系统模拟摄影测量系统,把经纬仪水平角、垂直角观测值化算为虚拟像点坐标观测值,按摄影测量光束法平差进行二台或多台经纬仪间的系统定代间坐标解算,从而实现了经纬仪在任意姿态下的空间坐标测量功能。在光束法平差的基础上开发了中文版ＴＳＳＴ２．００工业测量系统软件。最后介绍了偏置型抛物面天线的数学模型和ＴＳＳＴ工业测量系统在其检测中的应用。     

穿过张家口—渤海地震带西缘的折射剖面所揭示的地壳上地幔构造与速度结构

近期完成的北北东向的繁峙～太仆寺旗宽角反射／折射剖面,由山西断隆进入内蒙地轴,它穿过了山西地震带的大同～阳高震区和北西西向张家口～渤海地震带的西北缘。其主要目的是探测研究张～渤地震带及其两侧壳幔构造与速度结构的差异及其与地震活动的相关性。结果表明：张～渤地震带壳内界面及莫霍面较其两侧有１．０～２．０ｋｍ的不同程度的上隆;在阳原～张家口之间地壳结构纵向与横向非均匀性明显,上地壳和下地壳上部有局部的速度逆转,下地壳下部的低速层由山西断隆一直延伸至内蒙地轴,上地幔顶部的速度梯度明显增大;在阳原、怀安和张北附近分别存在着延伸至莫霍面的地壳深断裂带;在内蒙地轴一系列壳内界面不明显。     

Evaluating the stress intensity factors of anisotropic bimaterials using boundary element method

This paper presents a boundary element method (BEM) procedure for a linear elastic fracture mechanics analysis in two‐dimensional anisotropic bimaterials. In this formulation, a displacement integral equation is only collocated on the uncracked boundary, and a traction integral equation is only collocated on one side of the crack surface. A fundamental solution (Green's function) for anisotropic bimaterials is also derived and implemented into the boundary integral formulation so that except for the interfacial crack part, the discretization along the interface can be avoided. A special crack‐tip element is introduced to capture the exact crack‐tip behavior. A computer program using FORTRAN has been developed to effectively calculate the stress intensity factors of an anisotropic bimaterial. This BEM program has been verified to have a good accuracy with previous studies. In addition, a central cracked bimaterial Brazilian specimen constituting cement and gypsum is prepared to conduct the Brazilian test under diametral loading. The result shows that the numerical analysis can predict relatively well the direction of crack initiation and the path of crack propagation. Copyright © 2007 John Wiley & Sons, Ltd.