文山—辰山公路岩质高边坡稳定性评价

文山—辰山公路位于福建连江可门港区,环罗源湾,其中K5+000~K5+140段沿线穿越工程地质条件复杂的岩质高边坡。该边坡岩体发育有2组优势结构面,边坡受到该2组优势结构面的共同作用,需评价其稳定性。运用赤平极射投影方法,分析判定了斜坡自然状态的稳定性,并进一步分析得到拟开挖路堑边坡的合理放坡坡率。现经施工实践证明,效果良好。     

节理岩体断裂的分形机理研究

本文在考察了节理化岩体的断裂力学特征的基础上，结合现代分形几何原理，建立起追踪裂纹裂分形模型，对不连续岩体的断裂韧性的分形效应进行了深入研究，并通过压剪试验得到难。     

SEDIMENT BUDGETS AND RATES OF SEDIMENT TRANSFER ACROSS COLD ENVIRONMENTS IN EUROPE: A COMMENTARY

The sediment mass balance equation is the fundamental concept which underpins most sediment budget studies in cold climate environments. In these environments the interchange between water and ice plays a predominant geomorphological role. Such environments show a large variety of geomorphic processes which are conditioned by both contemporary environmental conditions but also the legacy of past events. In the northern Europe/Arctic fringe these cold regions are distributed in a fragmented fashion and are likely to be very sensitive to climate change scenarios. The significance of such changes for sediment transfer can only be established if we have good contemporary process understanding, the necessary tools to carefully monitor and model such changes, and can apply such methods at appropriate scales which integrate both sediment sources and sinks.     

土木工程结构鲁棒控制的发展

评述了结构控制的发展,指出发展结构鲁棒控制策略的重要性。重点评述了结构双重调谐质量阻尼器(DTMD)和多重双重调谐质量阻尼器(MDTMD)的控制策略,提出了需进一步发展主动双重调谐质量阻尼器(ADTMD)和主动多重双重调谐质量阻尼器(AMDTMD)控制策略、此外,评述了结构鲁棒控制的设计准则与高层建筑和大跨桥梁在风与地震作用下的统一自适应主动鲁棒控制策略。     

全风化花岗岩化学及矿物成份在全土和粘粒中的不同表征

对全风化花岗岩化学和矿物成份的测试常用全土和粘粒部分(粒径2减少了近50%,K2O含量也降低,而Al2O3、Fe2O3和H2O+都明显升高。粘粒中氧化物相对含量升高者居多;全岩矿物成份以石英、粘土矿物和长石为主,粘粒中埃洛石和高岭石占大多数,其次为伊利石;粒度成份、化学成份和矿物含量相关性比较明显的是:石英和角砾正相关,和砂粒负相关,长石和砂粒正相关,粘土矿物含量和Al2O3、烧失量(LOI)和埃洛石含量正相关。     

Microbialite of anoxic condition from Permian-Triassic transition in Guizhou,China

Spherical microfossils are present in the Hindeodus parvus zone of the Lower Triassic in Ziyun,Guizhou Province. They generally range from 0.15 to 0.30 mm across,with micritic wall and filled by micro-sparry calcites,and are evenly scattered in micritic matrix. Their abundance makes the rock as-signed to microbialites. The accompanied organisms include ostracods and algal mat,but no gastro-pods or bivalves. Presence of small (<7 μm) pyrite framboids indicates that this bed formed in anoxic conditions. In some sections,this bed is overlain and underlain by tidal-flat micritic limestone with microgastropods and small burrows. Occurrence only in deposits on reef top indicates that the micro-bial organism was benthic,and needed sunlight in life. The size of the microbial fossil exceeds that of any bacteria or cyanobacteria. Thus,it does not belong to these two phyla. It may belong to lower green algae,and is assigned to a new species in a new genus,Ziyunosphaeridium sinensis gen. et sp. nov. Up to now,the rocks described as microbialites from the Permian-Triassic transition include six types: (1) porous micritic limestone such as that descried from Japan by Sano and Nakashima (1997),(2) limestone with rich globular microfossils such as that described from the Nanpanjiang Basin in China by Lehrmann (1999),(3) dendroidal limestone such as that described from the vicinity of Chongqing by Kershaw et al. (1999),(4) spherical microbial limestone adapted to anoxic environments described from Ziyun,Guizhou reported in this paper,(5) limestone with cyanobacterial fossils such as that described by Wang et al. (2005),and (6) stromatolites. All these microbialites are not reefs in the proper sense,and the argument that Permian reef ecosystems extended into the Mesozoic is incorrect.     

Holocene calcrete crust deposits on the moraine of Batura Glacier, northern Pakistan

Abstract   Calcretes can be observed on the surface of old moraines around Batura Glacier in the upper Hunza Valley, Karakoram Mountains, Pakistan. They develop as a calcareous crust cementing small gravels under boulders. In order to understand the genesis of the calcrete crust, a variety of methods were employed: (i) study of mineralogy and geochemistry of a calcrete crust precipitated on the lateral moraine using X-ray diffractometer and electron probe microanalysis; (ii) analysis of solute chemistry of surface water and ice bodies around the Batura Glacier; and (iii) accelerator mass spectrometry ¹⁴C dating of the crust itself. The results indicate that the calcrete crust has definite laminated layers composed of a fine-grain and compact calcite layer, and a mineral fragment layer. The chemical composition of the calcite layer is approximately 60% CaO and 1% MgO. The mineral fragment layer consists of rounded grain materials up to 0.2 mm in diameter. It shows a graded bedding structure with fine grains of quartz, albite and muscovite. Meanwhile, as the Paleozoic Pasu limestone is distributed around the terminal of Batura Glacier, Ca cations dissolve in the melt water of the glacier. Accordingly, the calcrete crust is precipitated by decreases in CO₂ partial pressure from glacier ice and evaporation of the melt water, including high concentration of Ca²⁺ at ephemeral streams and small ponds stagnating between the moraine and glacial ice. On the basis of the AMS ¹⁴C age, the calcrete is considered to have formed approximately 8200 calibrated years bp under the Batura glacial stage.     

基于FLUENT的内孤立波质量源造波方法

为研究内孤立波质量源数值造波方法,本文采用两个点源形式的质量源,分别放置于两层流体的上下层中作为内孤立波激发源。推导源项表达式,从不可压缩流体的Navier-Stokes方程出发,结合内孤立波Kd V、e Kd V理论,基于商业软件FLUENT发展了一种内孤立波质量源数值造波方法。通过数值模拟,分析了质量源造波过程中内孤立波的生成过程,并将数值模拟结果同理论及实验作对比。结果表明:基于此方法生成的内孤立波波形、波高及波致水平速度与理论及实验吻合度较好,该方法是可行的,并且耗时短、效率高。     

Source identification of PM2.5 particles measured in Gwangju, Korea

The UNMIX and Chemical Mass Balance (CMB) receptor models were used to investigate sources of PM_2.5 aerosols measured between March 2001 and February 2002 in Gwangju, Korea. Measurements of PM_2.5 particles were used for the analysis of carbonaceous species (organic (OC) and elemental carbon (EC)) using the thermal manganese dioxide oxidation (TMO) method, the investigation of seven ionic species using ion chromatography (IC), and the analysis of twenty-four metal species using Inductively Coupled Plasma (ICP)-Atomic Emission Spectrometry (AES)/ICP-Mass Spectrometry (MS). According to annual average PM_2.5 source apportionment results obtained from CMB calculations, diesel vehicle exhaust was the major contributor, accounting for 33.4% of the measured PM_2.5 mass (21.5 μg m^− 3), followed by secondary sulfate (14.6%), meat cooking (11.7%), secondary organic carbon (8.9%), secondary nitrate (7.6%), urban dust (5.5%), Asian dust (4.4%), biomass burning (2.8%), sea salt (2.7%), residual oil combustion (2.6%), gasoline vehicle exhaust (1.9%), automobile lead (0.5%), and components of unknown sources (3.4%). Seven PM_2.5 sources including diesel vehicles (29.6%), secondary sulfate (17.4%), biomass burning (14.7%), secondary nitrate (12.6%), gasoline vehicles (12.4%), secondary organic carbon (5.8%) and Asian dust (1.9%) were identified from the UNMIX analysis. The annual average source apportionment results from the two models are compared and the reasons for differences are qualitatively discussed for better understanding of PM_2.5 sources.Additionally, the impact of air mass pathways on the PM_2.5 mass was evaluated using air mass trajectories calculated with the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) backward trajectory model. Source contributions to PM_2.5 collected during the four air mass patterns and two event periods were calculated with the CMB model and analyzed. Results of source apportionment revealed that the contribution of diesel traffic exhaust (47.0%) in stagnant conditions (S) was much higher than the average contribution of diesel vehicle exhaust (33.4%) during the sampling period. During Asian dust (AD) periods when the air mass passed over the Korean peninsula, Asian dust and secondary organic carbon accounted for 25.2 and 23.0% of the PM_2.5 mass, respectively, whereas Asian dust contributed only 10.8% to the PM_2.5 mass during the AD event when the air mass passed over the Yellow Sea. The contribution of biomass burning to the PM_2.5 mass during the biomass burning (BB) event equaled 63.8%.     

Analysis of Difference Between Direct and Geodetic Mass Balance Measurements at South Cascade Glacier, Washington

Net mass balance has been measured since 1958 at South Cascade Glacier using the 'direct method,' e.g. area averages of snow gain and firn and ice loss at stakes. Analysis of cartographic vertical photography has allowed measurement of mass balance using the 'geodetic method' in 1970, 1975, 1977, 1979–80, and 1985–97. Water equivalent change as measured by these nearly independent methods should give similar results. During 1970–97, the direct method shows a cumulative balance of about −15 m, and the geodetic method shows a cumulative balance of about −22 m. The deviation between the two methods is fairly consistent, suggesting no gross errors in either, but rather a cumulative systematic error. It is suspected that the cumulative error is in the direct method because the geodetic method is based on a non-changing reference, the bedrock control, whereas the direct method is measured with reference to only the previous year's summer surface. Possible sources of mass loss that are missing from the direct method are basal melt, internal melt, and ablation on crevasse walls. Possible systematic measurement errors include under-estimation of the density of lost material, sinking stakes, or poorly represented areas.