松江河电厂小山水电站导流洞出口边坡稳定性分析

小山水电站导流洞出口边坡其地质结构为下部中侏罗世安山岩（αＪ２），其上覆盖了第三纪末第四纪初的玄武岩（βＮ～Ｑ），两者间为不整合接触，不整合面夹有０．１～０．６ｍ厚的粘土状及碎石粘土状夹层，产状倾向河床，倾角±２５°。在上覆玄武岩层中见有高倾角的宽张裂隙带，与不整合面一起构成松动岩体，不整合面为底滑面。通过边界条件的分析和稳定计算，松动岩体的抗滑系数Ｋ＝３．１０２，边坡是稳定的。在施工过程中采取了相应的安全保护措施，导流洞出口提前２８ｍ进洞，节约挖方量６００００ｍ３，提前了工期。经三年多的施工到运行，边坡无异常变化，表明该项优化设计是可行的。     

山谷冰川稳定态时积累区面积比率研究

探讨山谷冰川稳定状态时积累区面积比率，即ＡＡＲ值的大小，认为冰川物质平衡高程分布，平面形态及坡面坡度沿程变化形式是影响山谷冰川稳定态ＡＡＲ值的主要因素，并 山谷冰川稳定态ＡＡＲ值与物质平衡高程分布及平面形态之间的定量关系。山谷冰川适合于应用ＡＲ值法来研究古冰川的零平衡线高程。     

蚀变岩中物质迁移的定量计算：以锡矿山锑矿床为例

本文提出了确定沉积岩蚀变作用过程中的不活动组分的方法，并以锡矿山锑矿床为例，定量计算了蚀变岩中各组分的带入带出量，研究表明：锡矿山锑矿硅化过程中ＴｉＯ２和Ａｌ２Ｏ３为不活动组；ＳｉＯ２，Ｋ２Ｏ，Ｎａ２Ｏ及锑，硫，坤，汞，铅和钡为带入组分；而ＣａＯ，ＭｇＯ，Ｆｅ２Ｏ３，ＭｎＯ及铜，锌为带出组分，锑，钡，硫，ＳｉＯ２和ＣａＯ有较大的带进或带出量，锡矿山锑矿床矿石矿物为单一辉锑矿可能是由于矿液中缺少其它     

土体各向异性的再认识

土体原生和次生各向异性有本质不同。从柔度矩阵的角度分析了弹性和弹塑性理论对各向异性的反映 ;复杂应力状态下砂土真三轴试验结果表明 ,次生各向异性对土体应力应变关系有很大影响 ,是土体特性的本质体现 ,在土工数值分析中应当充分考虑其影响。     

岩质高边坡岩体变形参数及松弛带厚度研究

预测岩质高边坡开挖后岩体变形模量的变化及松弛带厚度，是分析岩质高边坡在开挖后变形（位移）和作好防护设计的重要资料，运用波动力学关于平均应力与体积模量、岩体纵波速度与弹性模量、变形模量间的关系，通过部分实测资料及边坡应力场有限元分析的资料，分别建立了纵波速度与岩体变形模、岩体应力间的关系，研究了开挖边坡岩体变形模量的变化，预测了岩体松弛带的厚度。     

K–Ar geochronology of the temporal change of eruptive style in the eastern Izu peninsula, central Japan

Abstract   A recent K–Ar study elucidated that eruptive style in the eastern Izu peninsula changed from polygenetic to monogenetic volcano at 0.3–0.2 Ma. To narrow down the time of change, we determined 10 K–Ar ages on Togasayama Andesite of Amagi volcano, the youngest polygenetic volcano in the area, and Togasayama Monogenetic Volcano, one of the oldest monogenetic volcanoes in the area, which overlies a part of the Togasayama Andesite. Dating results showed that the Togasayama Andesite effused at least from 0.34 to 0.20 Ma, whereas the Togasayama Monogenetic Volcano erupted at 0.26–0.29 Ma, suggesting that the northern part of the Togasayama Andesite effused after the eruption of the Togasayama Monogenetic Volcano. Considering previous data, it is therefore inferred that change of eruptive style in the eastern Izu area occurred during the period 0.29–0.20 Ma, with considerable overlap of both polygenetic and monogenetic volcanism.     

An experimental study on seismic responses of multifunctional vibration‐absorption reinforced concrete megaframe structures

Two models are tested on a shake‐table. One of the models is a normal reinforced concrete megaframe structure and the other is a multifunctional vibration‐absorption reinforced concrete megaframe structure in which the laminated rubber bearings are placed between the major frame and the minor frames. Two earthquake motions (the El Centro wave and the Taft wave) are used during the test. This paper presents the dynamic characteristic, the seismic responses and the failure mechanism of these two models under varying peak acceleration levels for each of the earthquake motions. The test results demonstrate that the aseismic behavior of a multifunctional vibration‐absorption reinforced concrete megaframe structure is much better than that of a normal reinforced concrete megaframe structure. Copyright © 2003 John Wiley & Sons, Ltd.     

Seismic structural control using an electric servomotor active mass driver system

This study investigates an electric‐type active mass driver (AMD) system for structural vibration control. Composed primarily of an electric servomotor and a ball screw, the electrical AMD system is free from noise problems, oil leakage, and labor‐intensive maintenance that commonly are associated with hydraulic AMD systems. The desired stroke amplification of the mass and the power demand of the servomotor can be adjusted via the ball screw pitch, which in turn affects the effectiveness and efficiency of the system. Meanwhile, an instantaneous optimal direct output feedback control algorithm is adopted. Numerical simulation is performed using a five‐story steel frame as the object structure under the conditions of the 1940 El Centro earthquake. The AMD system proves to be effective and efficient within a certain range of the ball screw pitch. The reductions of the peak responses can reach as high as 70% if properly designed. Requiring only the velocity measurement of the top floor for on‐line feedback control, the proposed control algorithm is recommended for practical implementation. Copyright © 2004 John Wiley & Sons, Ltd.     

CAPPS在太原市本地化过程中的改进和应用

该文针对CAPPS在太原市运行的误差问题，在分析其主要原因的基础上，变换地形背景场，依据不同季节、不同天气形势，在模式中增加对综合误差系数和扬尘系数的调节功能，进行多种数值模拟试验。结果表明:在误差分析基础上确定的模拟试验方案，使主要污染物SO₂、NO_X和PM₁₀的预报值与监测值的相关系数分别提高到0.96、0.91和0.89，最终使CAPPS成为预报准确率稳定在90%以上的业务化数值模式系统。     

BECAPEX科学试验城市建筑群落边界层大气环境特征及其影响

20 0 1～ 2 0 0 3年在北京实施了大气边界层动力、热力、化学综合观测试验 (BECAPEX ,BeijingCityAtmosphericPollutionObservationFieldExperiment) ,获取了北京城市大气动力和大气化学三维结构图像。综合观测试验分析研究发现 ,城市区域呈非均匀次生尺度热岛分布 ,并伴随着城市次生尺度环流 ,影响了局地空气污染物分布特征。MODIS卫星遥感 地面观测资料经过变分分析 ,可发现北京城市空气污染与周边区域影响源有密切关系 ,并影响城市群落环境气候特征 ,导致该区域日照、雾日、低云量和能见度呈显著年代际变化趋势。