地形三维建模中特殊地物的处理方法

在三维建模领域,空中三角测量通过少量的控制点,按一定的数学模型加密解算出所需要的全部控制点及每张像片的外方位元素并由此进行三维重建工作;若遇到一些特殊地物(如桥梁、铁塔、水域等)时,往往会出现模型错乱、模糊不清、有漏洞或无法正确显示等一系列问题。本文采用倾斜摄影测量建模的方式,对一些特殊地物进行信息采集,再利用专业软件进行加工处理,用3dsmax类建模软件对采集的信息进行精细建模,用skyline类软件进行三维场景编辑及漫游,从而能够实现基于原本样貌重建特殊地物的三维模型。     

The Photogrammetric Survey of a Prehistoric Site Undergoing Removal

For the construction of the new Athens International Airport, it was imperative that a hill, obstructing air traffic, be lowered by approximately 40 m. Unfortunately, a fortified prehistoric settlement was situated on top of that hill. In order to carry out this task, it was required: (a) to produce a model of the site at a scale of 1;50; and (b) to monitor and document every single stone during the dismantling of the most important parts of the site, so that its rebuilding elsewhere and at a later time would be possible.
The Laboratory of Photogrammetry, National Technical University of Athens, undertook to provide the necessary metric data. By using low altitude aerial photographs from a helicopter, a specialized tripod and terrestrial photogrammetric techniques, the following products were created, all at a scale of 1;50: contour lines and DTM of the site; digital orthophotograph of the site; graphic drawing of the development of the exterior of the surrounding wall; and graphic drawings of the upper (initial) and the lower (last) levels of the parts to be removed. In this paper, both the fieldwork and the final products are presented and evaluated.     

基于深度学习的倾斜摄影建筑物表面损毁信息提取

建筑物受损信息是地震受灾程度评估的基础,针对传统建筑物表面信息识别人工成本高、效率低等问题,受深度学习提取建筑物影像的启发,提出利用无人机倾斜摄影模型与深度学习相结合的方法提取震后建筑物表面破损信息。以2019年长宁6.0级地震为例,选用双河镇震后倾斜摄影模型切片图为数据源,对比分析面向对象分类方法、VGG-16模型和DeeplabV3+模型对建筑物表面损毁信息的提取结果。分析结果表明,针对建筑物表面破损信息的提取,尤其是细小裂缝的提取,语义分割网络DeeplabV3+模型具有较强的优势(准确率96.93%、召回率96.85%、总体精度96.89%),可实现建筑物表面破损信息的有效提取,具有较强的应用价值。     

APPLICATION OF UAVLS TO RAPID GEOLOGICAL SURVEYS

Three-dimensional scanning with LiDAR has been widely used in geological surveys. The LiDAR with high accuracy is promoting geoscience quantification. And it will be much more convenient, efficient and useful when combining it with the Unmanned Aerial Vehicle (UAV). This study focuses on UAV-based Laser Scanning (UAVLS)geological field mapping, taking two examples to present advantages of the UAVLS in contrast with other mapping methods. For its usage in active fault mapping, we scanned the Nanpo village site on the Zhangxian segment of the West Qinling north-edge fault. It effectively removed the effects of buildings and vegetation, and uncovered the fault trace. We measured vertical offset of 1.3m on the terrace T₁ at the Zhang river. Moreover, we also scanned landslide features at the geological hazard observatory of Lanzhou University in the loess area. The scanning data can help understand how micro-topography affects activation of loess landslides. The UAVLS is time saving in the field, only spending about half an hour to scan each site. The amount of average points per meter is about 600, which can offer topography data with resolution of centimeter. The results of this study show that the UAVLS is expected to become a common, efficient and economic mapping tool.     

野马河—大雪山断裂肃北段晚第四纪活动特征研究

前人对野马河—大雪山断裂肃北段的晚第四纪活动特征研究相对薄弱,缺少有关断层最新活动的证据。本文在高分辨率遥感解译的基础上,对肃北断裂开展全段1∶5 000的地质地貌填图,通过探槽开挖、放射性碳(~(14)C)测年以及低空无人机摄影测量(small Unmanned Aerial Vehicles,简称sUAV)等工作,对该断裂晚第四纪活动性进行系统研究。发现肃北断裂为一条全新世的逆冲活动断裂,晚第四纪以来具有多期活动,西水沟探槽剖面揭示出2次古地震事件,古地震离逝时间为(4 192.5±97.5)a B.P.之后。     

实景三维精细建模优化方法探索与实践

对比分析目前常用的几种实景三维建模方法及适用性,剖析倾斜摄影三维建模技术在几何结构和模型纹理等方面存在的问题,提出了实景三维精细建模的优化方法和技术路线,着重阐述了高低空航摄相结合的关键技术,明显改善了模型效果,提高了建模的质量与效率,为实景三维数字城市建设提供了技术参考.     

基于稀少控制点的SPOT5卫星立体条带影像的生产应用研究

随着相关技术的发展,高分辨率卫星遥感影像在测绘产品生产中的应用越来越广泛和深入。本文主要通过西部无图区测图的应用实践,讨论利用有理多项式方法、基于稀少控制点纠正的SPOT5HRS立体条带影像的测图生产情况,并对DLG、DEM等产品进行精度检测;同时与传统的航摄方法进行对比,分析其生产效率等情况。     

航测法在第二次土地调查中的应用

介绍了第二次土地调查的工作任务和特点,分析了3S技术的应用,比较了航测与遥感技术在土地调查中的发展,总结了航测法制作大比例尺正射影像底图的工作流程和利用航测软件的立体测图模块绘制图斑地类线的方法。实践证明,利用航测法制作二调工作底图能够提高地类界线的准确度从而提高地类图斑的面积计算与统计的精度;减轻外业调查工作量,优化流程,具有突出的先进性和科学性。     

无人机航摄相片倾角对立体高程扭曲的影响分析

通过对相片倾角对航测高程误差影响的理论分析,结合无人机低空摄影实际生产出现的问题,提出无人机低空摄影飞行姿态控制的指导性建议。     

Automatic urban building boundary extraction from high resolution aerial images using an innovative model of active contours

To present a new method for building boundary detection and extraction based on the active contour model, is the main objective of this research. Classical models of this type are associated with several shortcomings; they require extensive initialization, they are sensitive to noise, and adjustment issues often become problematic with complex images. In this research a new model of active contours has been proposed that is optimized for the automatic building extraction. This new active contour model, in comparison to the classical ones, can detect and extract the building boundaries more accurately, and is capable of avoiding detection of the boundaries of features in the neighborhood of buildings such as streets and trees. Finally, the detected building boundaries are generalized to obtain a regular shape for building boundaries. Tests with our proposed model demonstrate excellent accuracy in terms of building boundary extraction. However, due to the radiometric similarity between building roofs and the image background, our system fails to recognize a few buildings.